Navegação por assunto "phosphors"

Classificar por: Ordenar: Resultados:

  • IPEN-DOC 03277

    DIAS, M.S. ; JOHNSON, R.G.; WASSON, O.A.. An absolute neutron flux detector for the 1-20 MeV region. In: INTERNATIONAL CONFERENCE ON NUCLEAR DATA FOR SCIENCE AND TECHNOLOGY, 1983, 1983. p. 875-7. DOI: 10.1007/978-94-009-7099-1_198

    Palavras-Chave: energy range; neutron flux; radiation detectors; absolute counting; phosphors; monte carlo method

  • IPEN-DOC 22183

    GAIOLLO, EDSON L. ; MOREIRA, RENAN P. ; BARBOSA, HELLIOMAR P.; PEDROSO, CASSIO C.S.; RODRIGUES, LUCAS C.V.; MALTA, OSCAR L.; BRITO, HERMI F.; FELINTO, MARIA C.F.C. . Blue luminescence in MWO4:Tmsup(3+) (M= Ba, Sr) phosphors. In: INTERNATIONAL CONFERENCE ON THE PHYSICS OF OPTICAL MATERIALS AND DEVICES, 4th, August 31– September 4, 2015, Budva, Montenegro. Abstract... 2015. p. 252.

    Palavras-Chave: luminescence; tungstates; doped materials; thulium ions; x-ray diffraction; phosphors; emission spectra

  • IPEN-DOC 26710

    LIMA, SAMIA R.M. ; FAUSTINO, MAINARA G. ; SANTOS, EDDY B. dos ; SILVA, TATIANE B.S.C. da ; PIRES, MARIA A.F. ; COTRIM, MARYCEL E.B. . Caracterização das frações de fósforo no sedimento superficial dos rios Aracaí, Carambeí e Guaçu na cidade de São Roque/SP. In: MACHADO, FELIPE S. (Org.); MOURA, ALOYSIO S. de (Org.). Educação, Meio Ambiente e Território 3. Ponta Grossa, PR: Atena Editora, 2019. p. 123-136, v. 3, cap. 12. DOI: 10.22533/at.ed.442192102

    Abstract: O fósforo é um elemento essencial para todas as formas de vida na Terra, podendo ser introduzido no ambiente aquático através de fontes naturais ou antropogênicas. A avaliação deste elemento em ecossistemas aquáticos é de suma importância, uma vez que ele atua na regulação da produtividade primária. Logo, este trabalho teve por objetivo avaliar a distribuição e fracionamento do fósforo nos sedimentos dos principais rios do Município de São Roque a fim de verificar a contribuição do fósforo no processo de eutrofização, além dos demais impactos antrópicos que possam implicar na qualidade das águas dos rios da região. Para tanto, foram avaliados 5 pontos amostrais e determinadas as concentração de fósforo, juntamente com os parâmetros físico-químicos (granulometria, pH, e matéria orgânica). Os teores de sedimentos finos e de matéria orgânica foram os principais parâmetros ambientais correlacionados com as frações de fósforo. O método analítico utilizado foi o Protocolo desenvolvido pelo Standards, Measurements and Testing (SMT), que fracionou o fósforo nos sedimentos em total (PT), inorgânico (PI), orgânico (PO), não apatítico (PINA) e apatítico (PIA). Foi verificado eu as maiores concentrações ocorreram nos sedimentos do ponto G4 com 456,9 mg kg-1 para PT e que os teores de PI foram maiores que os de PO na maioria dos pontos.

    Palavras-Chave: phosphors; sediments; fractionation; standards; testing; analytic functions

  • IPEN-DOC 24773

    PEREIRA, MARIA da C.C. ; MADI FILHO, TUFIC ; BERRETTA, JOSE R. ; MESQUITA, CARLOS H. de . Characteristics of the CsI:Tl scintillator crystal for X-Ray imaging applications. Materials Sciences and Applications, v. 9, n. 2, p. 268-280, 2018. DOI: 10.4236/msa.2018.92018

    Abstract: Scintillators are high-density luminescent materials that convert X-rays to visible light. Thallium doped cesium iodide (CsI:Tl) scintillation materials are widely used as converters for X-rays into visible light, with very high conversion efficiency of 64.000 optical photons/MeV. CsI:Tl crystals are commercially available, but, the possibility of developing these crystals into different geometric shapes, meeting the need for coupling the photosensor and reducing cost, makes this material very attractive for scientific research. The objective of this work was to study the feasibility of using radiation sensors, scintillators type, developed for use in imaging systems for X-rays. In this paper, the CsI:Tl scintillator crystal with nominal concentration of the 10−3 M was grown by the vertical Bridgman technique. The imaging performance of CsI:Tl scintillator was studied as a function of the design type and thickness, since it interferes with the light scattering and, hence, the detection efficiency plus final image resolution. The result of the diffraction X-ray analysis in the grown crystals was consistent with the pattern of a face-centered cubic (fcc) crystal structure. Slices 25 × 2 × 3 mm3 (length, thickness, height) of the crystal and mini crystals of 1 × 2 × 3 mm3 (length, thickness, height) were used for comparison in the imaging systems for X-rays. With these crystals scintillators, images of undesirable elements, such as metals in food packaging, were obtained. One-dimensional array of photodiodes and the photosensor CCD (Coupled Charge Device) component were used. In order to determine the ideal thickness of the slices of the scintillator crystal CsI:Tl, Monte Carlo method was used.

    Palavras-Chave: cesium iodides; doped materials; thallium ions; crystal growth; phosphors; image processing; photodiodes; charge-coupled devices

  • IPEN-DOC 18728

    SILVA, IVAN G.N.; KAI, JIANG; FELINTO, MARIA C.F.C. ; BRITO, HERMI F.. Colour tuning phosphor of Eusub(0.01)Tbsub(0.99)TMA•4Hsub(2)O complex. In: INTERNATIONAL CONFERENCE ON THE PHYSICS, 2rd, September 3-6, 2012, Belgrado, Servia. Abstract... 2012.

    Palavras-Chave: phosphors; europium; terbium; aqueous solutions; color; tuning; luminescence; x-ray diffraction; infrared spectra; spectroscopy

  • IPEN-DOC 28398

    CAIANO, SOLANO R.; CRUZ, VANDERLEI; BOTTARO, MARCIO; LEITE, MARCO A.L.; MURATA, HELIO M.; BONIFACIO, DANIEL A.B. . Dependência da resolução em energia em função da temperatura de uma fotomultiplicadora de silício acoplada a um cristal cintilador. In: CONGRESSO BRASILEIRO DE METROLOGIA, 11; CONGRESSO BRASILEIRO DE METROLOGIA DAS RADIAÇÕES IONIZANTES, 8, 18-21 de outubro, 2021, Online. Anais... Rio de Janeiro: Sociedade Brasileira de Metrologia, 2021.

    Abstract: A fotomultiplicadora de silício (SiPM – “Silicon Photomultiplier”) tornou-se um dispositivo importante capaz de detectar a radiação X e gama. Uma desvantagem dessa tecnologia é a dependência de temperatura que o material semicondutor possui. A caracterização em energia da SiPM, possibilita mensurar parâmetros importantes sobre o detector. A SiPM acoplada ao cristal cintilador, compõe o aparato experimental e as medidas são realizadas através de um osciloscópio. Os resultados apresentados demonstram o comportamento esperado da SiPM sem a influência do cristal cintilador. Com a análise dos espectros em energia, é possível desenvolver um método de controle capaz de minimizar a influência da dependência da temperatura.

    Palavras-Chave: silicon diodes; photomultipliers; energy resolution; temperature dependence; crystals; phosphors

  • IPEN-DOC 14915

    PEREIRA, MARIA C.C. ; MADI FILHO, TUFIC ; HAMADA, MARGARIDA M. . Development of crystals based on cesium iodide for measurements of gamma radiation and alpha particles. Nukleonika, v. 54, n. 3, p. 151-155, 2009.

    Palavras-Chave: phosphors; crystals; cesium iodides; alpha particles; luminescence

  • IPEN-DOC 27740

    SILVA, ANDERSON M.B.; SILVEIRA, WELLISSON S.; MATOS, TAWANY S.; JUNOT, DANILO O. ; REZENDE, MARCOS V.S.; SOUZA, DIVANIZIA N.. Effect of terbium and silver co-doping on the enhancement of photoluminescence in CaSO4 phosphors. Optical Materials, v. 111, p. 1-8, 2021. DOI: 10.1016/j.optmat.2020.110717

    Abstract: In this work, the photoluminescence properties of CaSO4 crystals co-doped with terbium and silver from silver oxide or silver nanoparticles (NPs) in different concentrations are investigated. Phosphors are obtained by means of a slow evaporation route and calcined at 600 °C for 1 h. X-ray diffraction analysis shows the formation of a single-phase anhydrite structure with orthorhombic symmetry. The photoluminescence properties are investigated using vacuum ultraviolet, ultraviolet and X-ray excitation. All luminescent measurements reveal the characteristic emissions of Tb3+. The analyses using excitation with ultraviolet light show that the Ag NPs are able to generate structural defects more satisfactorily compared to CaSO4:Tb with silver oxide. We also observe that higher concentrations of Ag increase the Tb3+ emission intensity, while higher concentrations of Ag NPs decrease it. The good stability of CaSO4 results in an efficient energy transfer from the host lattice to the activator under X-ray excitation, with the NPs contributing to the increase in luminescent intensity. Investigation of the terbium valence in the CaSO4 host shows a complete reduction of the Tb4+ present in Tb4O7 to Tb3+, as indicated by the X-ray absorption near edge structure. The vacuum ultraviolet excitation spectra reveal three broad bands, attributed to the charge-transfer excitations within SO42− complexes and to the 4f8 → 4f75d1 transitions on Tb3+. Our results also reveal that silver particles are responsible for generating deeper capture centers.

    Palavras-Chave: calcium sulfates; terbium; silver; phosphors; doped materials; photoluminescence; optical properties; crystals; nanoparticles; x-ray diffraction; ultraviolet radiation

  • IPEN-DOC 27897

    PEREIRA, M.C.C. ; FILHO, T.M. ; TOMAZ, L.F. ; BERRETTA, J.R. . Growth and optical characteristics of the CsI:Li scintillator crystal for use as radiation detector. Brazilian Journal of Radiation Sciences, v. 9, n. 1A, p. 1-18, 2021. DOI: 10.15392/bjrs.v9i1A.1478

    Abstract: Materials capable of converting ionizing radiation into light photons are called scintillators, some have specific efficiencies for certain applications and types of radiation, e.g. gamma, X-ray, alpha, beta and neutrons. CsI:Tl and NaI:Tl crystals are commonly found in the market because they have several applications, but few studies have been done on lithium doped cesium iodide crystal (CsI:Li). The lithium element, in this crystal used as a dopant, is also exploited as a converter for neutron detection, as it has a shock section of 940 barns for thermal neutrons. The study of the CsI:Li crystal is convenient considering the natural abundance of the lithium element with 7.5%, besides the interest in having a low cost national scintillator material, with an opportunity to search for the response of a detector for different types of radiation. The CsI:Li crystal was grown with molar concentration 10-4 to 10-1, using the vertical Bridgman technique. The parameters involved in the growth process were investigated. The transmittance was evaluated in the spectral region from 190 nm to 1100 nm. Luminescence emission spectra for the CsI:Li crystal were evaluated by photometric analysis of the crystal stimulated with a 137Cs (662 keV) source in front of the coupled sample at the monochromator input. The crystals showed maximum luminescence intensity at the wavelength of 420 nm. It was evaluated the response of the scintillators, when excited with gamma radiation of 241Am, 133Ba, 22Na, 137Cs, 60Co and neutron radiation from the AmBe source, with energy range of 1 MeV to 12 Mev.

    Palavras-Chave: cesium 137; cesium iodides; crystal growth; doped materials; emission spectra; energy range; gamma radiation; lithium; neutron detection; optical properties; phosphors; photometry; radiation detectors

  • IPEN-DOC 26195

    TOMAZ, LUCAS F. ; MADI FILHO, TUFIC ; BERRETTA, JOSE R. ; PEREIRA, MARIA da C.C. . Growth and optics characteristics of the CsI:Li scintillator crystal for use as radiation detector. In: INTERNATIONAL NUCLEAR ATLANTIC CONFERENCE, October 21-25, 2019, Santos, SP. Proceedings... Rio de Janeiro: Associação Brasileira de Energia Nuclear, 2019. p. 1052-1065.

    Abstract: Materials capable of converting ionizing radiation into light photons are called scintillators, some have specific efficiencies for certain applications and types of radiation, e.g. gamma, X-ray, alpha, beta and neutrons. CsI:Tl and NaI:Tl crystals are commonly found in the market because they have several applications, but few studies have been done on lithium doped cesium iodide crystal (CsI:Li). The lithium element, in this crystal used as a dopant, is also exploited as a converter for neutron detection, as it has a shock section of 940 barns for thermal neutrons. The study of the CsI:Li crystal is convenient considering the natural abundance of the lithium element with 7.5%, besides the interest in having a low cost national scintillator material with an opportunity to search the response of a detector for different types of radiation. The CsI:Li crystal was grown with molar concentration 10-4 to 10-1, using the vertical Bridgman technique. The parameters involved in the growth process were investigated. The transmittance was evaluated in the spectral region from 190 nm to 1100 nm. Luminescence emission spectra for the CsI:Li crystal were evaluated by photometric analysis of the crystal stimulated with a 137Cs (662 keV) source in front of the coupled sample at the monochromator input. The crystals showed of maximum luminescence intensity at the wavelength of 420 nm. The response of the scintillators when excited with gamma radiation of 241Am, 133Ba, 22Na,137Cs, 60Co and neutron radiation from the AmBe source, with energy range of 1 MeV to 12 Mev was evaluated.

    Palavras-Chave: cesium 137; energy range; gamma radiation; growth; lithium; neutron detection; optics; phosphors; photometry; radiation detectors

  • IPEN-DOC 22381

    PEREIRA, MARIA da C.C. ; MADI FILHO, TUFIC ; CARDENAS, JOSE P.N. . Inorganic scintillation crystals for neutron detection. IEEE Transactions on Nuclear Science, v. 63, n. 3, p. 1699-1702, 2016. DOI: 10.1109/TNS.2016.2551379

    Palavras-Chave: phosphors; radiation detectors; neutron detection; crystals; evaluation; feasibility studies; ; inorganic compounds

  • IPEN-DOC 16630

    RODRIGUES, LUCAS C.V.; STEFANI, ROBERVAL; BRITO, HERMI F.; HOLSA, JORMA; FELINTO, MARIA C.F.C. ; LASTUSAARI, MIKA; KODAIRA, CLAUDIA A.. Investigação espectroscópica dos fósforos BaAlsub(2)Osub(4):Eu(3+), TRsup(3+)- efeito do ion terra rara trivalente na persistência luminescente. In: REUNIAO ANUAL DA SOCIEDADE BRASILEIRA DE QUIMICA, 33., 28-31de maio, 2009, Águas de Lindóia, SP. Resumos... 2010.

    Palavras-Chave: luminescence; phosphors; europium; photoluminescence; rare earths; barium; aluminates

  • IPEN-DOC 29833

    SILVA, ANDERSON M.B.; RODRIGUES, DANIEL S.; ANTONIO, PATRICIA L. ; JUNOT, DANILO O.; CALDAS, LINDA V.E. ; SOUZA, DIVANIZIA N.. Investigation of dosimetric properties of CaSO4:Mn phosphor prepared using slow evaporation route. Applied Radiation and Isotopes, v. 199, p. 1-9, 2023. DOI: 10.1016/j.apradiso.2023.110874

    Abstract: The objective of this work was to investigate the luminescent properties of CaSO4:Mn synthesized by slow evaporation route. The crystalline structure, morphology, thermal and optical properties of the phosphors were characterized by X-ray diffraction analysis (XRD), Scanning electron microscopy (SEM), photoluminescence (PL) and thermogravimetric analysis (TGA). Moreover, using thermoluminescence (TL) and optically stimulated luminescence (OSL) techniques, the dosimetric properties of the phosphors, such as emission spectra, glow curve reproducibility, dose-response linearity, fading of the luminescent signal, variation of the TL intensity with the heating rate, OSL decay curves, correlation between TL and OSL emissions and minimum detectable dose (MDD) were comprehensively investigated. For dosimetric analyses, the samples were irradiated with doses from 169 mGy to 10 Gy. The emission band fits with the characteristic line of the Mn2+ emission features, ascribed to 6 A1→4 T1 transition. CaSO4:Mn pellets present a TL glow curve with a single typical peak centered around 494 nm, an OSL decay curve with predominance of a fast decay component, and a MDD on the order of mGy. The luminescent signals showed to be linear and reproducible in the studied dose range. The trapping centers located between 0.83 eV and 1.07 eV were revealed for different heating rates in the TL study. The high TL sensitivity of CaSO4:Mn was proven when comparing with commercially available dosimeters. The luminescent signals exhibit a smaller fading than described in the literature for CaSO4:Mn produced by other methods.

    Palavras-Chave: calcium sulfates; comparative evaluations; decay; diagrams; dosemeters; emission spectra; evaporation; glow curve; heating rate; irradiation; manganese ions; optical properties; phosphors; photoluminescence; radiation doses; thermal gravimetric analysis

  • IPEN-DOC 29531

    SILVA, ANDERSON M.B.; RODRIGUES, DANIEL S.; ANTONIO, PATRICIA L. ; JUNOT, DANILO O.; CALDAS, LINDA V.E. ; SOUZA, DIVANIZIA N.. Investigation of dosimetric properties of CaSO4:Mn phosphor prepared using slow evaporation route. In: INTERNATIONAL SYMPOSIUM ON SOLID STATE DOSIMETRY, 22nd., September 19-23, 2022, Zacatecas, Mexico. Proceedings... Zacatecas, Mexico: Sociedad Mexicana de Irradiacion y Dosimetria, 2022. p. 145-170.

    Abstract: The objective of this work was to investigate the luminescent properties of CaSO4:Mn synthesized by slow evaporation route. The crystalline structure, morphology, thermal and optical properties of the phosphors were characterized by X-ray diffraction analysis (XRD), Scanning electron microscopy (SEM), photoluminescence (PL) and thermogravimetric analysis (TGA). Moreover, using thermoluminescence (TL) and optically stimulated luminescence (OSL) techniques, the dosimetric properties of the phosphors, such as emission spectra, glow curve reproducibility, dose-response linearity, fading of the luminescent signal, variation of the TL intensity with the heating rate, OSL decay curves, correlation between TL and OSL emissions and minimum detectable dose (MDD) were comprehensively investigated. For dosimetric analyses, the samples were irradiated with doses from 169 mGy to 10 Gy. The emission band fits with the characteristic line of the Mn2+ emission features, ascribed to 6A1→4T1 transition. CaSO4:Mn pellets present a TL glow curve with a single typical peak centered around 494 nm, an OSL decay curve with predominance of a fast decay component, and a MDD on the order of hundreds of mGy. The luminescent signals showed to be linear and reproducible in the studied dose range. The trapping centers located between 0.83 eV and 1.07 eV were revealed for different heating rates in the TL study. The high TL sensitivity of CaSO4:Mn was proven when comparing with commercially available dosimeters. The luminescent signals exhibit a smaller fading than described in the literature for CaSO4:Mn produced by other methods.

    Palavras-Chave: calcium sulfates; comparative evaluations; decay; diagrams; evaporation; glow curve; heating rate; irradiation; manganese ions; optical properties; phosphors; photoluminescence; radiation doses; signals; thermal gravimetric analysis; thermoluminescence

  • IPEN-DOC 21337

    SILVA, I.G.N.; RODRIGUES, L.C.V.; SOUZA, E.R.; KAI, J.; FELINTO, M.C.F.C. ; HOLSA, J.; BRITO, H.F.; MALTA, O.L.. Low temperature synthesis and optical properties of the Rsub(2)Osub(3):Eusup(3+) nanophosphors (Rsup(3+):Y, Gd and Lu) using TMA complexes as precursors. Optical Materials, v. 40, p. 41-48, 2015.

    Palavras-Chave: nanoparticles; phosphors; precursor; temperature range 0065-0273 k; europium; doped materials; gadolinium; yttrium; lutetium; photoluminescence

  • IPEN-DOC 18723

    RODRIGUES, LUCAS C.V.; KAI, JIANG; FELINTO, MARIA C.F.C. ; HOLSA, JORMA; BRITO, HERMI F.; SILVA, IVAN G.N.. Low temperature synthesis of Rsub(2)Osub(3):Eusup(3+) (R: Y, Gd and Lu) nanophosphor using trimellitic acid precursors. In: INTERNATIONAL CONFERENCE ON F-ELEMENTS, 8th, August 26-31, 2012, Udine, Italy. Abstract... 2012.

    Palavras-Chave: luminescence; europium; doped materials; yttrium; gadolinium; lutetium; nanostructures; phosphors; temperature range 0065-0273 k

  • IPEN-DOC 18719

    SILVA, IVAN G.N.; RODRIGUES, LUCAS C.V.;; SOUZA, ERNESTO R.; KAI, JIANG; FELINTO, MARIA C.F.C. ; NUNES, LUIZ A.O.; HOLSA, JORMA; BRITO, HERMI F.. Low temperature synthesis of Rsub(2)Osub(3):Eusup(3+) (R: Y, Gd and Lu) nanophosphor using trimellitic acid precursors. In: ENCONTRO NACIONAL DE TERRAS RARAS, 5., 10-13 de abril, 2012, João Pessoa, PB. Resumos... 2012.

    Palavras-Chave: luminescence; europium; doped materials; yttrium; gadolinium; lutetium; nanostructures; phosphors; temperature range 0065-0273 k

  • IPEN-DOC 19752

    BARBOSA, H.P.; RODRIGUES, L.C.V.; SILVA, I.G.N.; FELINTO, M.C.F.C. ; BRITO, H.F.. Luminescence investigation of BaWOsub(4):Rsup(3+) (Rsup(3+):Eu, TB) nanophosphors prepared by a soft chemistry method. In: ENCONTRO DA SBPMAT - SOCIEDADE BRASILEIRA DE PESQUISA EM MATERIAIS, 12., 29 de setembro - 3 de outubro, 2013, Campos do Jordão, SP. Resumos... 2013.

    Palavras-Chave: luminescence; barium; tungsten oxides; doped materials; rare earths; europium; terbium; nanostructures; phosphors; coprecipitation; absorption spectroscopy

  • IPEN-DOC 21771

    BARBOSA, HELLIOMAR P.; KAI, JIANG; SILVA, IVAN G.N.; RODRIGUES, LUCAS C.V.; FELINTO, MARIA C.F.C. ; HOLSA, JORMA; MALTA, OSCAR L.; BRITO, HERMI F.. Luminescence investigation of Rsup(3+)-doped alkaline earth tungstates prepared by a soft chemistry method. Journal of Luminescence, v. 170, n. 2, p. 736-742, 2016.

    Palavras-Chave: photoluminescence; rare earths; tungstates; coprecipitation; chemistry; charge exchange; phosphors

  • IPEN-DOC 29610

    MOREIRA, RENAN P. ; FRANCISCO, LEONARDO H.C. ; COSTA, ISRAEL F.; BARBOSA, HELLIOMAR P.; TEOTONIO, ERCULES E.S.; FELINTO, MARIA C.F.C. ; MALTA, OSCAR L.; BRITO, HERMI F.. Luminescence properties of BaMO4:Eu3+ (M: Mo or W) phosphors derived from co-precipitation reaction. Journal of Alloys and Compounds, v. 937, p. 1-11, 2023. DOI: 10.1016/j.jallcom.2022.168408

    Abstract: Luminescent BaMO4:xmol%Eu3+ materials (M: Mo or W, and x: 0, 2, 4, 6, 8, and 10 mol%) were successfully obtained by a coprecipitation method at room temperature without additional thermal treatment, leading to highly crystalline materials with reduced reaction times and low manufacturing cost. Structural analyses by powder X-ray diffraction and vibrational Raman techniques of the [WO4]2- and [MoO4]2- groups confirm a characteristic scheelite-type structure. The results indicate an average crystallite size at around 30 nm, and a highly pure phase has been supported by Rietveld refinement. SEM-EDS data of BaMO4:xmol%Eu3+ materials identified polycrystalline particles with bipyramidal-like morphology and homogeneous europium ion distribution. Additionally, the band gap energy (Eg) of barium molybdate and tungstate materials were calculated from reflectance data by the single-constant Kubelka-Munk function. Furthermore, the emission intensity, lifetime, and intrinsic emission quantum yield (Q Eu3+/Eu3+) of the materials have been determined and discussed. The luminescent properties of these materials are significantly influenced by the LMCT excitation bands (O2- → Mo6+, W6+, and Eu3+) as well as their intense red emission bands assigned to Eu3+ transitions. The experimental intensity parameter values Ω2 and Ω4 were evaluated from the emission spectra, using the magnetic dipole 5D0 → 7F1 transition as the standard reference. It was observed that the Ω2 values are much higher than the Ω4 values. This result is related to the fact that the 5D0 → 7F2 transition presents a much higher intensity than 5D0 → 7F1 one suggesting a low local symmetry around the Eu3+ ion, which might be due to angular distortions in the local coordination geometry. The high Q Eu3+/Eu3+ values (60–79%) indicated an overall high emission intensity for the prepared phosphors. These are special photonic features of the Eu3+-doped molybdate and tungstate, suggesting they could be suitable for luminescent materials applications.

    Palavras-Chave: luminescence; europium; tungstates; molybdates; coprecipitation; phosphors

A pesquisa no RD utiliza os recursos de busca da maioria das bases de dados. No entanto algumas dicas podem auxiliar para obter um resultado mais pertinente.

É possível efetuar a busca de um autor ou um termo em todo o RD, por meio do Buscar no Repositório , isto é, o termo solicitado será localizado em qualquer campo do RD. No entanto esse tipo de pesquisa não é recomendada a não ser que se deseje um resultado amplo e generalizado.

A pesquisa apresentará melhor resultado selecionando um dos filtros disponíveis em Navegar

Os filtros disponíveis em Navegar tais como: Coleções, Ano de publicação, Títulos, Assuntos, Autores, Revista, Tipo de publicação são autoexplicativos. O filtro, Autores IPEN apresenta uma relação com os autores vinculados ao IPEN; o ID Autor IPEN diz respeito ao número único de identificação de cada autor constante no RD e sob o qual estão agrupados todos os seus trabalhos independente das variáveis do seu nome; Tipo de acesso diz respeito à acessibilidade do documento, isto é , sujeito as leis de direitos autorais, ID RT apresenta a relação dos relatórios técnicos, restritos para consulta das comunidades indicadas.

A opção Busca avançada utiliza os conectores da lógica boleana, é o melhor recurso para combinar chaves de busca e obter documentos relevantes à sua pesquisa, utilize os filtros apresentados na caixa de seleção para refinar o resultado de busca. Pode-se adicionar vários filtros a uma mesma busca.

Exemplo:

Buscar os artigos apresentados em um evento internacional de 2015, sobre loss of coolant, do autor Maprelian.

Autor: Maprelian

Título: loss of coolant

Tipo de publicação: Texto completo de evento

Ano de publicação: 2015

Para indexação dos documentos é utilizado o Thesaurus do INIS, especializado na área nuclear e utilizado em todos os países membros da International Atomic Energy Agency – IAEA , por esse motivo, utilize os termos de busca de assunto em inglês; isto não exclui a busca livre por palavras, apenas o resultado pode não ser tão relevante ou pertinente.

95% do RD apresenta o texto completo do documento com livre acesso, para aqueles que apresentam o significa que e o documento está sujeito as leis de direitos autorais, solicita-se nesses casos contatar a Biblioteca do IPEN, bibl@ipen.br .

Ao efetuar a busca por um autor o RD apresentará uma relação de todos os trabalhos depositados no RD. No lado direito da tela são apresentados os coautores com o número de trabalhos produzidos em conjunto bem como os assuntos abordados e os respectivos anos de publicação agrupados.

O RD disponibiliza um quadro estatístico de produtividade, onde é possível visualizar o número dos trabalhos agrupados por tipo de coleção, a medida que estão sendo depositados no RD.

Na página inicial nas referências são sinalizados todos os autores IPEN, ao clicar nesse símbolo será aberta uma nova página correspondente à aquele autor – trata-se da página do pesquisador.

Na página do pesquisador, é possível verificar, as variações do nome, a relação de todos os trabalhos com texto completo bem como um quadro resumo numérico; há links para o Currículo Lattes e o Google Acadêmico ( quando esse for informado).

ATENÇÃO!

ESTE TEXTO "AJUDA" ESTÁ SUJEITO A ATUALIZAÇÕES CONSTANTES, A MEDIDA QUE NOVAS FUNCIONALIDADES E RECURSOS DE BUSCA FOREM SENDO DESENVOLVIDOS PELAS EQUIPES DA BIBLIOTECA E DA INFORMÁTICA.

O gerenciamento do Repositório está a cargo da Biblioteca do IPEN. Constam neste RI, até o presente momento 20.950 itens que tanto podem ser artigos de periódicos ou de eventos nacionais e internacionais, dissertações e teses, livros, capítulo de livros e relatórios técnicos. Para participar do RI-IPEN é necessário que pelo menos um dos autores tenha vínculo acadêmico ou funcional com o Instituto. Nesta primeira etapa de funcionamento do RI, a coleta das publicações é realizada periodicamente pela equipe da Biblioteca do IPEN, extraindo os dados das bases internacionais tais como a Web of Science, Scopus, INIS, SciElo além de verificar o Currículo Lattes. O RI-IPEN apresenta também um aspecto inovador no seu funcionamento. Por meio de metadados específicos ele está vinculado ao sistema de gerenciamento das atividades do Plano Diretor anual do IPEN (SIGEPI). Com o objetivo de fornecer dados numéricos para a elaboração dos indicadores da Produção Cientifica Institucional, disponibiliza uma tabela estatística registrando em tempo real a inserção de novos itens. Foi criado um metadado que contém um número único para cada integrante da comunidade científica do IPEN. Esse metadado se transformou em um filtro que ao ser acionado apresenta todos os trabalhos de um determinado autor independente das variáveis na forma de citação do seu nome.

A elaboração do projeto do RI do IPEN foi iniciado em novembro de 2013, colocado em operação interna em julho de 2014 e disponibilizado na Internet em junho de 2015. Utiliza o software livre Dspace, desenvolvido pelo Massachusetts Institute of Technology (MIT). Para descrição dos metadados adota o padrão Dublin Core. É compatível com o Protocolo de Arquivos Abertos (OAI) permitindo interoperabilidade com repositórios de âmbito nacional e internacional.

1. Portaria IPEN-CNEN/SP nº 387, que estabeleceu os princípios que nortearam a criação do RDI, clique aqui.


2. A experiência do Instituto de Pesquisas Energéticas e Nucleares (IPEN-CNEN/SP) na criação de um Repositório Digital Institucional – RDI, clique aqui.

O Repositório Digital do IPEN é um equipamento institucional de acesso aberto, criado com o objetivo de reunir, preservar, disponibilizar e conferir maior visibilidade à Produção Científica publicada pelo Instituto, desde sua criação em 1956.

Operando, inicialmente como uma base de dados referencial o Repositório foi disponibilizado na atual plataforma, em junho de 2015. No Repositório está disponível o acesso ao conteúdo digital de artigos de periódicos, eventos, nacionais e internacionais, livros, capítulos, dissertações, teses e relatórios técnicos.

A elaboração do projeto do RI do IPEN foi iniciado em novembro de 2013, colocado em operação interna em julho de 2014 e disponibilizado na Internet em junho de 2015. Utiliza o software livre Dspace, desenvolvido pelo Massachusetts Institute of Technology (MIT). Para descrição dos metadados adota o padrão Dublin Core. É compatível com o Protocolo de Arquivos Abertos (OAI) permitindo interoperabilidade com repositórios de âmbito nacional e internacional.

O gerenciamento do Repositório está a cargo da Biblioteca do IPEN. Constam neste RI, até o presente momento 20.950 itens que tanto podem ser artigos de periódicos ou de eventos nacionais e internacionais, dissertações e teses, livros, capítulo de livros e relatórios técnicos. Para participar do RI-IPEN é necessário que pelo menos um dos autores tenha vínculo acadêmico ou funcional com o Instituto. Nesta primeira etapa de funcionamento do RI, a coleta das publicações é realizada periodicamente pela equipe da Biblioteca do IPEN, extraindo os dados das bases internacionais tais como a Web of Science, Scopus, INIS, SciElo além de verificar o Currículo Lattes. O RI-IPEN apresenta também um aspecto inovador no seu funcionamento. Por meio de metadados específicos ele está vinculado ao sistema de gerenciamento das atividades do Plano Diretor anual do IPEN (SIGEPI). Com o objetivo de fornecer dados numéricos para a elaboração dos indicadores da Produção Cientifica Institucional, disponibiliza uma tabela estatística registrando em tempo real a inserção de novos itens. Foi criado um metadado que contém um número único para cada integrante da comunidade científica do IPEN. Esse metadado se transformou em um filtro que ao ser acionado apresenta todos os trabalhos de um determinado autor independente das variáveis na forma de citação do seu nome.