JavaScript is disabled for your browser. Some features of this site may not work without it.
Navegação IPEN por autor "GUVEN, OLGUN"
-
BARSBAY, MURAT; GUVEN, OLGUN; KODAMA, YASKO
.
Amine functionalization of cellulose surface grafted with glycidyl methacrylate by gamma-initiated RAFT polymerization.
Radiation Physics and Chemistry,
v. 124,
p. 140-144,
2016.
Palavras-Chave:
amines;
cellulose;
surfaces;
grafts;
methacrylates;
polymerization;
filters;
paper;
spectroscopy;
scanning electron microscopy
BARSBAY, MURAT; GUVEN, OLGUN; KODAMA, YASKO.
Amine functionalization of cellulose surface grafted with glycidyl methacrylate by gamma-initiated RAFT polymerization.
Radiation Physics and Chemistry,
v. 124,
p. 140-144,
2016.
Disponível em: http://repositorio.ipen.br/handle/123456789/26522. Acesso em: $DATA.
Esta referência é gerada automaticamente de acordo com as normas do estilo IPEN/SP (ABNT NBR 6023) e recomenda-se uma verificação final e ajustes caso necessário.
Como referenciar este item
-
SOARES, CARLOS
; SANTANA, JULYANA
; GUVEN, OLGUN; MOURA, ESPERIDIANA A.B.
.
A comparison between graphene oxide and reduced graphene oxide as reinforcement agents in polypropylene nanocomposite using irradiated polypropylene as compatibilizer.
In: LI, JIAN (Ed.); ZHANG, MINGMING (Ed.); LI, BOWEN (Ed.); MONTEIRO, SERGIO N. (Ed.); IKHMAYIES, SHADIA (Ed.); KALAY, YUNUS E. (Ed.); HWANG, JIANN-YANG (Ed.); ESCOBEDO-DIAZ, JUAN P. (Ed.); CARPENTER, JOHN S. (Ed.); BROWN, ANDREW D. (Ed.).
Characterization of Minerals, Metals, and Materials.
Cham, CZ, Switzerland: Springer Nature Switzerland AG,
2020.
p. 385-394,
(The Minerals, Metals & Materials Series).
DOI:
10.1007/978-3-030-36628-5_36
Abstract:
Graphene is thematerial with the bestmechanical resistance ever encountered.
Various types of studies have been carried out on possible applications. The use
as a reinforcement in nanocomposites has shown to be a promising field, but some
studies indicate that the graphene oxide (GO) and reduced graphene oxide (RGO)
have better results as reinforcement, due to the functional groups,which allowa better
adhesion with the matrix. This study analyzes the production of polypropylene (PP)
nanocomposite comparing the use of graphene oxide (GO) and reduced graphene
oxide (RGO) as fillers and irradiated polypropylene as a coupling agent.Atwin-screw
extruder and injection molding machine were used to produce the nanocomposite
PP reinforced with 0.2 wt% of GO and RGO by melt blending. The GO and RGO
were characterized byXRDanalysis.The nanocomposite sampleswere characterized
by XRD, SEM, TG, DSC and mechanical test.
Palavras-Chave:
graphene;
oxides;
polypropylene;
nanocomposites;
gamma radiation;
stresses;
tensile properties
SOARES, CARLOS; SANTANA, JULYANA; GUVEN, OLGUN; MOURA, ESPERIDIANA A.B.
A comparison between graphene oxide and reduced graphene oxide as reinforcement agents in polypropylene nanocomposite using irradiated polypropylene as compatibilizer.
In:
LI, JIAN (ed.); ZHANG, MINGMING (ed.); LI, BOWEN (ed.); MONTEIRO, SERGIO N. (ed.); IKHMAYIES, SHADIA (ed.); KALAY, YUNUS E. (ed.); HWANG, JIANN-YANG (ed.); ESCOBEDO-DIAZ, JUAN P. (ed.); CARPENTER, JOHN S. (ed.); BROWN, ANDREW D. (ed.).
Characterization of Minerals, Metals, and Materials.
Cham, CZ, Switzerland: Springer Nature Switzerland AG,
2020.
p. 385-394.
(The Minerals, Metals & Materials Series).
DOI:
10.1007/978-3-030-36628-5_36.
Disponível em: http://repositorio.ipen.br/handle/123456789/31851. Acesso em: $DATA.
Esta referência é gerada automaticamente de acordo com as normas do estilo IPEN/SP (ABNT NBR 6023) e recomenda-se uma verificação final e ajustes caso necessário.
Como referenciar este item
-
ARANTES, MARIANA M.
; SANTANA, JULYANA
; VALENZUELA-DIAZ, F.R.; RANGARI, VIJAY K.; GUVEN, OLGUN; MOURA, ESPERIDIANA A.B.
.
Development and characterization of recycled-HDPE/EVA foam reinforced with babassu coconut epicarp fiber residues.
In: LI, BOWEN (Ed.); LI, JIAN (Ed.); IKHMAYIES, SHADIA (Ed.); ZHANG, MINGMING (Ed.); KALAY, YUNUS E. (Ed.); CARPENTER, JOHN S. (Ed.); HWANG, JIANN-YANG (Ed.); MONTEIRO, SERGIO N. (Ed.); FIRRAO, DONATO (Ed.); BROWN, ANDREW (Ed.); BAI, CHENGUANG (Ed.); PENG, ZHIWEI (Ed.); ESCOBEDO-DIAZ, JUAN P. (Ed.); GOSWAMI, RAMASIS (Ed.); KIM, JEONGGUK (Ed.).
Characterization of Minerals, Metals, and Materials. TMS.
Cham, CZ, Switzerland: Springer International Publishing AG,
2018.
p. 497-506,
(The Minerals, Metals & Materials Series).
DOI:
10.1007/978-3-319-72484-3_52
Abstract:
Nowadays, the development of polymeric materials reinforced with residues of vegetal fibers is becoming popular for application in different segments, from the automotive to the civil construction and furniture industry. Vegetal fiber residues may be used as reinforcement of the recycled polymer materials, for instance, to produce foams to packaging or to thermal and acoustic isolation for green building application. This work is focused on the development and characterization of recycled-HDPE/EVA foam reinforced with fiber residues from babassu coconut epicarp. Firstly, composites based on recycled-HDPE/EVA blend reinforced with babassu coconut fiber were obtained by melting extrusion process. The composites were then extruded in a special single screw for foaming. The foam samples were submitted to mechanical tests, density measurement, DSC, TG, and FE-SEM analysis.
Palavras-Chave:
coconut palms;
coconuts;
fibers;
polyethylenes;
polymerization;
polyvinyls;
recycling
ARANTES, MARIANA M.; SANTANA, JULYANA; VALENZUELA-DIAZ, F.R.; RANGARI, VIJAY K.; GUVEN, OLGUN; MOURA, ESPERIDIANA A.B.
Development and characterization of recycled-HDPE/EVA foam reinforced with babassu coconut epicarp fiber residues.
In:
LI, BOWEN (ed.); LI, JIAN (ed.); IKHMAYIES, SHADIA (ed.); ZHANG, MINGMING (ed.); KALAY, YUNUS E. (ed.); CARPENTER, JOHN S. (ed.); HWANG, JIANN-YANG (ed.); MONTEIRO, SERGIO N. (ed.); FIRRAO, DONATO (ed.); BROWN, ANDREW (ed.); BAI, CHENGUANG (ed.); PENG, ZHIWEI (ed.); ESCOBEDO-DIAZ, JUAN P. (ed.); GOSWAMI, RAMASIS (ed.); KIM, JEONGGUK (ed.).
Characterization of Minerals, Metals, and Materials. TMS.
Cham, CZ, Switzerland: Springer International Publishing AG,
2018.
p. 497-506.
(The Minerals, Metals & Materials Series).
DOI:
10.1007/978-3-319-72484-3_52.
Disponível em: http://repositorio.ipen.br/handle/123456789/28879. Acesso em: $DATA.
Esta referência é gerada automaticamente de acordo com as normas do estilo IPEN/SP (ABNT NBR 6023) e recomenda-se uma verificação final e ajustes caso necessário.
Como referenciar este item
-
SANTANA, JULYANA G.
; SEIXAS, M.V. de S.
; ARANTES, MARIANA
; GUVEN, OLGUN; MOURA, ESPERIDIANA A.B.
.
Effects on Clay addition on properties of LDPE flexible films.
In: PAN AMERICAN CONGRESS OF NANOTECHNOLOGY, 1st,
27-30 de novembro, 2017,
Guarujá, SP.
Abstract...
2017.
Abstract:
Studies have indicated that the addition of nanoparticles in flexible films improves performance
flexible packaging, leading to better mechanical, thermal and barrier properties. Clay is an
abundant mineral, inexpensive, easy to process, and provide considerable enhancements on
the properties of polymers. Titanium dioxide (TiO 2 ) is widely used for its efficiency in scattering
visible light, and imparting whiteness, brightness, and high opacity when incorporated into a
plastic formulation. Low density polyethylene (LDPE) is generally used as a packaging material
due to its good resistance, easy processing, low cost and high hardness. The objective of this
study was to evaluate the effects of clay and TiO 2 nanoparticles addition on the properties of
LDPE flexible films. LDPE with 1 wt % of TiO 2 addition and 1-3 wt. % of green Brazilian Clay,
from Cubati, Pb, Brazil were prepared by melt extrusion process, using a twin-screw extruder
Haake Rheomex P332 with 16 mm and L/D = 25, from Thermo Scientific. Then the LDPE/Clay
nanocomposite was transformed into thin films using an extrusion blown film, single screw
machine with 25 mm diameter and specimen test samples were obtained. The specimen
samples were characterized by mechanical tests, UV-VIS, DSC, TG and FE-SEM analysis.
SANTANA, JULYANA G.; SEIXAS, M.V. de S.; ARANTES, MARIANA; GUVEN, OLGUN; MOURA, ESPERIDIANA A.B.
Effects on Clay addition on properties of LDPE flexible films.
In:
PAN AMERICAN CONGRESS OF NANOTECHNOLOGY, 1st,
27-30 de novembro, 2017,
Guarujá, SP.
Abstract...
2017.
Disponível em: http://repositorio.ipen.br/handle/123456789/29053. Acesso em: $DATA.
Esta referência é gerada automaticamente de acordo com as normas do estilo IPEN/SP (ABNT NBR 6023) e recomenda-se uma verificação final e ajustes caso necessário.
Como referenciar este item
-
BARSBAY, MURAT; KODAMA, YASKO
; GUVEN, OLGUN.
Functionalization of cellulose with epoxy groups via 'gamma'-initiated RAFT-mediated grafting of glycidyl methacrylate.
Cellulose,
v. 21,
n. 6,
p. 4067-4079,
2014.
Palavras-Chave:
graft polymers;
cellulose;
epoxides;
methacrylates;
gamma radiation;
polymerization
BARSBAY, MURAT; KODAMA, YASKO; GUVEN, OLGUN.
Functionalization of cellulose with epoxy groups via 'gamma'-initiated RAFT-mediated grafting of glycidyl methacrylate.
Cellulose,
v. 21,
n. 6,
p. 4067-4079,
2014.
Disponível em: http://repositorio.ipen.br/handle/123456789/23207. Acesso em: $DATA.
Esta referência é gerada automaticamente de acordo com as normas do estilo IPEN/SP (ABNT NBR 6023) e recomenda-se uma verificação final e ajustes caso necessário.
Como referenciar este item
-
COLOMBO, MARIA A.S.
; DIAZ, FRANCISCO R.V.; KODALI, DEEPA; RANGARI, VIJAYA; GUVEN, OLGUN; MOURA, ESPERIDIANA A.B.
.
Influence of reinforcing efficiency of clay on the mechanical properties of poly(butylene terephthalate) nanocomposite.
Ceramics,
v. 6,
n. 1,
p. 58-73,
2023.
DOI:
10.3390/ceramics6010005
Abstract:
In contrast to traditional fillers, clay, in particular, natural smectite clay, represents an environmentally significant alternative to improve the properties of polymers. Compared to conventional
nanofillers, smectite clay can effectively enhance the physical and mechanical properties of polymer
nanocomposites with a relatively small amount of addition (<5 wt%). The present study focuses
on investigating the reinforcing efficiency of different amounts (up to 5 wt%) of a natural Brazilian
smectite clay modified (MBClay) on the mechanical properties of poly(butylene terephthalate) (PBT)
nanocomposites and also evaluates the correlation between MBClay addition and the mechanical
and thermal behaviors of the PBT/MBClay nanocomposites. Natural Brazilian clay modified by
the addition of quaternary salt and sodium carbonate (MBClay) was infused into the PBT polymer
by melt extrusion using a twin-screw extruder. It was found that the best properties for PBT were
obtained at 3.7 wt% of modified BClay. Tensile strength at break exhibited increased by about 60%,
flexural strength increased by 24%, and flexural modulus increased by 17%. In addition, an increase in
the crystallinity percentage of PBT/BClay nanocomposite was confirmed by DSC and XRD analysis,
and a gain of about 45% in HDT was successfully achieved due to the incorporation of 3.7 wt%
of MBClay
Palavras-Chave:
nanocomposites;
clays;
polymers;
matrix materials;
mechanical properties;
morphology
COLOMBO, MARIA A.S.; DIAZ, FRANCISCO R.V.; KODALI, DEEPA; RANGARI, VIJAYA; GUVEN, OLGUN; MOURA, ESPERIDIANA A.B.
Influence of reinforcing efficiency of clay on the mechanical properties of poly(butylene terephthalate) nanocomposite.
Ceramics,
v. 6,
n. 1,
p. 58-73,
2023.
DOI:
10.3390/ceramics6010005.
Disponível em: http://repositorio.ipen.br/handle/123456789/34074. Acesso em: $DATA.
Esta referência é gerada automaticamente de acordo com as normas do estilo IPEN/SP (ABNT NBR 6023) e recomenda-se uma verificação final e ajustes caso necessário.
Como referenciar este item
-
BARTOLOMEI, SUELLEN S.
; SANTANA, JULYANA G.
; DIAZ, FRANCISCO R.V.; KAVAKLI, PINAR A.; GUVEN, OLGUN; MOURA, ESPERIDIANA A.B.
.
Investigation of the effect of titanium dioxide and clay grafted with glycidyl methacrylate by gamma radiation on the properties of EVA flexible films.
Radiation Physics and Chemistry,
v. 169,
p. 1-9,
2020.
DOI:
10.1016/j.radphyschem.2018.08.022
Abstract:
Many studies report that nanocomposites obtained by dispersion of a small amount nanofiller into the polymer
have remarkable improvements achieved in the mechanical and physical properties. However, in order to
achieve this great improvement in properties, it is necessary that the nanofillers be dispersed homogeneously
into the polymeric matrix. Often this dispersion is difficult to achieve due to the high interfacial energy of the
nanoparticles present. This study reports the effect of gamma irradiation induced graft of glycidyl methacrylate
(GMA) onto the surface of TiO2 and Clay nanofillers to improve their dispersion into the EVA matrix. The
physical and mechanical properties of Ethylene-vinyl acetate copolymer (EVA) flexible films with these nanoparticles
were studied. EVA nanocomposite with adding of the different amount of TiO2 and modified montmorillonite
clay grafted and un-grafted with glycidyl methacrylate (GMA) using gamma irradiation have been
prepared by melt extrusion. The nanocomposite flexible films were produced using a flat die extrusion process.
The PGMA-grafted nanofillers were characterized by XRD and TEM analysis. The flexible films were characterized
by Tensile tests, ATR–FTIR, UV–VIS, XRD, TG, and FE-SEM analysis to understand the nature of the
interaction between the nanofillers and EVA matrix. The results showed that the addition of PGMA-grafted TiO2
and Clay nanofillers into EVA matrix improved the bonding between the nanofillers and matrix. It was also found
that the PGMA-grafted nanofillers could be well dispersed into an EVA matrix in contrast to that of un-grafted.
The tensile strength and modulus of the resulting EVA/TiO2-PGMA enhanced in comparison to that of un-grafted
TiO2. The EVA/Clay-PGMA had slightly decreased tensile strength comparable to that of EVA/Clay but had
considerably improved elastic modulus. In addition, the flexible films based on TiO2 exhibited high UV–Vis light
absorption with energy gap shifted to the visible region. The results demonstrated that TiO2 and Clay nanofillers
grafted with GMA by gamma radiation can be used to prepare EVA flexible films with improved bonding between
the nanofillers and matrix and, consequently, enhanced properties for food and cosmetic packaging application.
Palavras-Chave:
dispersions;
films;
gamma radiation;
irradiation;
methacrylates;
nanocomposites;
physical properties;
polymerization;
titanium oxides;
x-ray diffraction
BARTOLOMEI, SUELLEN S.; SANTANA, JULYANA G.; DIAZ, FRANCISCO R.V.; KAVAKLI, PINAR A.; GUVEN, OLGUN; MOURA, ESPERIDIANA A.B.
Investigation of the effect of titanium dioxide and clay grafted with glycidyl methacrylate by gamma radiation on the properties of EVA flexible films.
Radiation Physics and Chemistry,
v. 169,
p. 1-9,
2020.
DOI:
10.1016/j.radphyschem.2018.08.022.
Disponível em: http://repositorio.ipen.br/handle/123456789/31073. Acesso em: $DATA.
Esta referência é gerada automaticamente de acordo com as normas do estilo IPEN/SP (ABNT NBR 6023) e recomenda-se uma verificação final e ajustes caso necessário.
Como referenciar este item
-
SANTANA, JULYANA G.
; ORTIZ, ANGEL
; AKBULUT, MESHUDE; RANGARI, VIJAY K.; VALENZUELA-DIAZ, FRANCISCO; GUVEN, OLGUN; MOURA, ESPERIDIANA A.B.
.
Mechanical, thermal and barrier properties of EVOH/GRAPHENE oxide flexible films treated by electron beam radiation.
In: MEETING OF IONIZING RADIATION AND POLYMERS SYMPOSIUM, 12th,
September 25-30, 2016,
Peninsula of Giens, France.
Abstract...
2016.
Abstract:
Ethylene vinyl alcohol (EVOH) copolymers are semicrystalline random copolymers of ethylene and vinyl alcohol that are widely used in the food packaging industry owing to their excellent chemical resistance, high transparency as well as excellent gas barrier properties to oxygen, organic solvents, and food aromas. However, EVOH is very sensitive to moisture and its gas barrier ability deteriorates in high relative humidity conditions. This study presents the preparation of EVOH/Graphene oxide films by twin-screw extrusion and blown film extrusion processing. The preparation of EVOH/Graphene oxide (EVOH/GO) films was carried out in two steps: EVOH with Graphene oxide powder (0-0.5 wt. %) was fed into a co-rotating twin-screw extruder, then the EVOH/GO nanocomposite was transformed into thin films using an extrusion blown film, single screw machine with 25 mm diameter and specimens test samples were obtained. Part of EVOH/GO flexible films were submitted to electron-beam irradiation at 150 and 200 kGy, using a 1.5 MeV electron beam accelerator, at room temperature in presence of air. The irradiated and non-irradiated samples were characterized by mechanical tests, XRD, TG, DSC, FE-SEM and TEM analysis and the correlation between properties was discussed. In addition, the oxygen permeability tests were performed at 23 C, 0 % and 90 % relative humidity using an OX-TRAN (MOCON Inc.). The free volume hole radius of both crystalline (0.201 nm) and amorphous parts (0.258 nm) of EVOH only and EVOH-GO samples were measured by Positron Annihilation Life-Time Spectroscopy. According to the results of the optical transparency measured, the EVOH/GO retaining good transparency films for all graphene oxide percentage added. The EVOH matrix with 0.1-0.4 wt. % graphene oxide content presented better oxygen barrier properties at 0 % relative humidity when compared with neat EVOH flexible films. After irradiation treatment, both, mechanical and oxygen barrier properties were drastically improved. Upon introduction of GO into EVOH matrix a reduction in the free volume hole radius in both parts have been observed indicating the formation of a more compact structure in EVOH/GO nanocomposites. Formation of hydrogen bonding between OH groups of EVOH and polar groups on graphene is assumed to be responsible for the reduction in free volume.
SANTANA, JULYANA G.; ORTIZ, ANGEL; AKBULUT, MESHUDE; RANGARI, VIJAY K.; VALENZUELA-DIAZ, FRANCISCO; GUVEN, OLGUN; MOURA, ESPERIDIANA A.B.
Mechanical, thermal and barrier properties of EVOH/GRAPHENE oxide flexible films treated by electron beam radiation.
In:
MEETING OF IONIZING RADIATION AND POLYMERS SYMPOSIUM, 12th,
September 25-30, 2016,
Peninsula of Giens, France.
Abstract...
2016.
Disponível em: http://repositorio.ipen.br/handle/123456789/27226. Acesso em: $DATA.
Esta referência é gerada automaticamente de acordo com as normas do estilo IPEN/SP (ABNT NBR 6023) e recomenda-se uma verificação final e ajustes caso necessário.
Como referenciar este item
-
SANTANA, JULYANA G.
; ORTIZ, ANGEL
; OLIVEIRA, RENE R.
; RANGARI, VIJAY K.; GUVEN, OLGUN; MOURA, ESPERIDIANA A.B.
.
Mechanical, thermal, morphology and barrier properties of flexible film based on polyethylene-ethylene vinyl alcohol blend reinforced with graphene oxide.
In: IKHMAYIES, SHADIA (Ed.); LI, BOWEN (Ed.); CARPENTER, JOHN S. (Ed.); LI, JIAN (Ed.); HWANG, JIANN-YANG (Ed.); MONTEIRO, SERGIO N. (Ed.); FIRRAO, DONATO (Ed.); ZHANG, MINGMING (Ed.); PENG, ZHIWEI (Ed.); ESCOBEDO-DIAZ, JUAN P. (Ed.); BAI, CHENGUANG (Ed.); KALAY, YUNUS E. (Ed.); GOSWAMI, RAMASIS (Ed.); KIM, JEONGGUK (Ed.).
Characterization of Minerals, Metals, and Materials.
Gewerbestrasse, Switzerland: Springer International Publishing AG.,
2017.
p. 49-57,
(The Minerals, Metals & Materials Series).
DOI:
10.1007/978-3-319-51382-9_7
Abstract:
Ethylene-vinyl alcohol (EVOH) copolymers are widely used in the food packaging industry as gas barrier properties to oxygen, organic solvents, and food aromas. EVOH is very sensitive to moisture and its gas barrier ability deteriorates in high relative humidity conditions. This work aims to prepare flexible films based on melt-blending high density polyethylene (HDPE) and ethylene-vinyl alcohol (HDPE/EVOH/EVA blend) reinforced with graphene oxide (GO). The HDPE/EVOH/EVA/GO flexible films were prepared by twin-screw extrusion and blown film extrusion processing. The flexible films samples were characterized by tensile tests, TG, DSC and FE-SEM analysis and the correlation between properties was discussed. In addition, the oxygen permeability tests were performed at 23 °C, 0 and 90% relative humidity using an OX-TRAN (MOCON Inc.).
Palavras-Chave:
packaging;
food industry;
alcohols;
ethylene;
copolymers
SANTANA, JULYANA G.; ORTIZ, ANGEL; OLIVEIRA, RENE R.; RANGARI, VIJAY K.; GUVEN, OLGUN; MOURA, ESPERIDIANA A.B.
Mechanical, thermal, morphology and barrier properties of flexible film based on polyethylene-ethylene vinyl alcohol blend reinforced with graphene oxide.
In:
IKHMAYIES, SHADIA (ed.); LI, BOWEN (ed.); CARPENTER, JOHN S. (ed.); LI, JIAN (ed.); HWANG, JIANN-YANG (ed.); MONTEIRO, SERGIO N. (ed.); FIRRAO, DONATO (ed.); ZHANG, MINGMING (ed.); PENG, ZHIWEI (ed.); ESCOBEDO-DIAZ, JUAN P. (ed.); BAI, CHENGUANG (ed.); KALAY, YUNUS E. (ed.); GOSWAMI, RAMASIS (ed.); KIM, JEONGGUK (ed.).
Characterization of Minerals, Metals, and Materials.
Gewerbestrasse, Switzerland: Springer International Publishing AG.,
2017.
p. 49-57.
(The Minerals, Metals & Materials Series).
DOI:
10.1007/978-3-319-51382-9_7.
Disponível em: http://repositorio.ipen.br/handle/123456789/29215. Acesso em: $DATA.
Esta referência é gerada automaticamente de acordo com as normas do estilo IPEN/SP (ABNT NBR 6023) e recomenda-se uma verificação final e ajustes caso necessário.
Como referenciar este item
-
ORTIZ, ANGEL
; AKBULUT, MESHUDE; SANTANA, JULYANA G.
; RANGARI, VIJAY K.; VALENZUELA-DIAZ, FRANCISCO; GUVEN, OLGUN; MOURA, ESPERIDIANA
.
Morphology, optical transparency and oxygen barrier of EVOH/graphene oxide films.
In: BRAZILIAN CONFERENCE ON COMPOSITE MATERIALS, 3rd,
August 28-31, 2016,
Gramado, RS.
Proceedings...
2016.
Abstract:
Food packaging materials require high gas and moisture barrier in other to preserve the quality of the products during storage and handling. Polyolefin materials have been widely used due to their water vapor resistance. Ethylene–vinyl alcohol copolymer (EVOH) is used as a gas barrier layer in packaging products that require high gas barrier. However, EVOH is very sensitive to moisture and its gas barrier ability deteriorates in high relative humidity conditions. In order to overcome the adverse effects of moisture on EVOH film this paper studies the incorporation of small amount of graphene oxide in EVOH by melt processing and evaluates their effects on morphology, optical transparency and oxygen barrier of EVOH film. The EVOH/Graphene oxide (EVOH/GO) film were processed by twin-screw extrusion and extrusion blown film processing. The films was characterized by XRD, FEG-SEM, and UV/VIS analysis. In addition, the oxygen transmission rate (OTR) were performed at 23 C, 0 % and 90 % relative humidity using an OX-TRAN (MOCON Inc.). According to the results of the optical transparency measured, the EVOH/GO retaining good transparency films for all graphene oxide percentage added. The graphene oxide at only 0.1 wt. % into the EVOH matrix drastically improved the oxygen barrier properties of EVOH/GO flexible film in both, 0 % and 90 % of the relative humidity test conditions.
Palavras-Chave:
packaging;
graphene;
ethylene;
alcohols;
copolymers;
morphology
ORTIZ, ANGEL; AKBULUT, MESHUDE; SANTANA, JULYANA G.; RANGARI, VIJAY K.; VALENZUELA-DIAZ, FRANCISCO; GUVEN, OLGUN; MOURA, ESPERIDIANA.
Morphology, optical transparency and oxygen barrier of EVOH/graphene oxide films.
In:
BRAZILIAN CONFERENCE ON COMPOSITE MATERIALS, 3rd,
August 28-31, 2016,
Gramado, RS.
Proceedings...
2016.
Disponível em: http://repositorio.ipen.br/handle/123456789/26740. Acesso em: $DATA.
Esta referência é gerada automaticamente de acordo com as normas do estilo IPEN/SP (ABNT NBR 6023) e recomenda-se uma verificação final e ajustes caso necessário.
Como referenciar este item
-
COSTA, FERNANDA A.T. da
; PARRA, DUCLERC F.
; CARDOSO, ELISABETH C.L.
; GUVEN, OLGUN.
PLA, PBAT, Cellulose Nanocrystals (CNCs), and their blends: biodegradation, compatibilization, and nanoparticle interactions.
Journal of Polymers and the Environment,
v. 31,
n. 11,
p. 4662–4690,
2023.
DOI:
10.1007/s10924-023-02899-7
Abstract:
PLA/PBAT (Poly (lactic acid)/Poly (butylene adipate-co-terephthalate)) blend is a biodegradable material commonly considered a potential alternative to polymeric products from petroleum sources. PLA is intrinsically brittle, endowed with a
low elongation at break and poor impact strength that restricts its use for some applications while PBAT has high ductility, heat resistance, and impact resistance. However, PLA associated with PBAT results in an incompatible blend, due to
poor interfacial adhesion. The compatibilization of PLA/PBAT can be improved through physical and chemical interaction
between the components, and with exposure to ionizing radiation. Cellulose is the most abundant biodegradable polymer
available and is considered the potential material to be used as reinforcement in sustainable composite materials, as well as
nanocellulose while an alternative to synthetic nanoparticles. This review describes the state of the art of polymer blends
of PBAT and PLA, in terms of manufacturability, compatibilization, biodegradation, radiation processing, and cellulose
nanocrystal reinforcement.
COSTA, FERNANDA A.T. da; PARRA, DUCLERC F.; CARDOSO, ELISABETH C.L.; GUVEN, OLGUN.
PLA, PBAT, Cellulose Nanocrystals (CNCs), and their blends: biodegradation, compatibilization, and nanoparticle interactions.
Journal of Polymers and the Environment,
v. 31,
n. 11,
p. 4662–4690,
2023.
DOI:
10.1007/s10924-023-02899-7.
Disponível em: http://repositorio.ipen.br/handle/123456789/34259. Acesso em: $DATA.
Esta referência é gerada automaticamente de acordo com as normas do estilo IPEN/SP (ABNT NBR 6023) e recomenda-se uma verificação final e ajustes caso necessário.
Como referenciar este item
-
KODAMA, YASKO
; BARSBAY, MURAT; GUVEN, OLGUN.
Poly(2-hydroxyethyl methacrylate) (PHEMA) grafted polyethylene/polypropylene (PE/PP) nonwoven fabric by 'gmma'-initiation: synthesis, characterization and benefits of RAFT mediation.
Radiation Physics and Chemistry,
v. 105,
p. 31-38,
2014.
Palavras-Chave:
polyethylenes;
polypropylene;
graft polymers;
methacrylates;
gamma radiation;
synthesis;
polymerization
KODAMA, YASKO; BARSBAY, MURAT; GUVEN, OLGUN.
Poly(2-hydroxyethyl methacrylate) (PHEMA) grafted polyethylene/polypropylene (PE/PP) nonwoven fabric by 'gmma'-initiation: synthesis, characterization and benefits of RAFT mediation.
Radiation Physics and Chemistry,
v. 105,
p. 31-38,
2014.
Disponível em: http://repositorio.ipen.br/handle/123456789/22927. Acesso em: $DATA.
Esta referência é gerada automaticamente de acordo com as normas do estilo IPEN/SP (ABNT NBR 6023) e recomenda-se uma verificação final e ajustes caso necessário.
Como referenciar este item
-
BARREIRA, DAILI A.S.
; SANTANA, JULYANA G.
; LAZARO, LOURDES Y.; RUIZ, JESUS G.; VALENZUELA-DIAZ, FRANCISCO; GUVEN, OLGUN; MOURA, ESPERIDIANA A.B.
.
Preparation of EVOH/graphene oxide by blown film extrusion – correlation between film properties and graphene oxide addition.
In: BRAZILIAN CONFERENCE ON COMPOSITE MATERIALS, 3rd,
August 28-31, 2016,
Gramado, RS.
Proceedings...
2016.
Abstract:
This study reports the preparation of EVOH films reinforced with graphene oxide by twin-screw extrusion and blown film extrusion processing. The preparation of EVOH/Graphene oxide (EVOH/GO) films was carried out in two steps: EVOH with Graphene oxide powder (0-0.5 wt. %) was fed into a co-rotating twin-screw extruder, then the EVOH/GO nanocomposite was transformed into thin films using an extrusion blown film, single screw machine with 25 mm diameter and specimens test samples were obtained. The purpose of this study was to evaluate the correlation between mechanical properties and thermal stability of EVOH/GO films and the amount of graphene oxide added to the EVOH matrix. Tensile tests were conducted using an INSTRON Testing Machine. DSC and TG analysis were used for investigate the thermal stability of EVOH/Graphene oxide films. DSC analysis results showed that melting temperature (Tm), melting enthalpy (Hm) and consequently the degree of crystallinity (Xc) of neat EVOH increased with the incorporation of the 0.1 and 0.5 wt. % of GO. TG of the composites showed a great difference in weight loss and in the onset degradation temperature when compared with the neat EVOH. The more important change was observed for EVOH/GO with 0.2 wt. % GO content that presented an increase of the onset degradation temperature. A significant enhancement of the tensile strength at break of EVOH/GO flexible film without important effects on the elongation at break were also observed, except for EVOH/GO with 0.2 wt. % GO content that presented an important increase in both, tensile strength and elongation at break. It can be concluded that the addition of GO is an effective means to improve the EVOH flexible films properties and led to the obtaining of packaging materials with superior properties suitable for several industrial applications.
Palavras-Chave:
graphene;
calorimetry;
differential thermal analysis;
tensile properties;
thermal gravimetric analysis
BARREIRA, DAILI A.S.; SANTANA, JULYANA G.; LAZARO, LOURDES Y.; RUIZ, JESUS G.; VALENZUELA-DIAZ, FRANCISCO; GUVEN, OLGUN; MOURA, ESPERIDIANA A.B.
Preparation of EVOH/graphene oxide by blown film extrusion – correlation between film properties and graphene oxide addition.
In:
BRAZILIAN CONFERENCE ON COMPOSITE MATERIALS, 3rd,
August 28-31, 2016,
Gramado, RS.
Proceedings...
2016.
Disponível em: http://repositorio.ipen.br/handle/123456789/26741. Acesso em: $DATA.
Esta referência é gerada automaticamente de acordo com as normas do estilo IPEN/SP (ABNT NBR 6023) e recomenda-se uma verificação final e ajustes caso necessário.
Como referenciar este item
-
SANTANA, JULYANA G.
; GUVEN, OLGUN; MOURA, ESPERIDIANA A.B.
.
Propriedades térmicas e mecânicas de filmes flexíveis de polietileno e copolímero de etileno e álcool vinílico reforçados com óxido de grafeno / Thermal and mechanical properties of flexible films of polyethylene and ethylene vinyl alcohol reinforced with graphene oxide.
In: CONGRESSO BRASILEIRO DE POLIMEROS, 14.,
22-26 de outubro, 2017,
Águas de Lindóia, SP.
Anais...
2017.
p. 1797-1802.
Abstract:
Os copolímeros de etileno e álcool vinílico (EVOH) são uma família de resinas com excelentes propriedades de barreira a gás de grande importância para a indústria de embalagens para alimentos, o polietileno de alta densidade (HDPE) um polímero hidrofóbico que em mistura com o EVOH, agrega melhores propriedades de barreira e mecânicas a embalagem final. O objetivo deste trabalho foi estudar os efeitos da adição de óxido de grafeno (GO) nas propriedades de filmes flexíveis preparados a partir de uma blenda HDPE e EVOH (HDPE/EVOH). Que foram processados, utilizando-se uma extrusora dupla rosca corrotante, e posteriormente os materiais processados foram alimentados a uma extrusora balão de laboratório para a obtenção dos filmes flexíveis. Os filmes flexíveis foram caracterizados por meio das análises de DSC, TG, MEV e ensaios de tração e a correlação entre as suas propriedades foi discutida.
SANTANA, JULYANA G.; GUVEN, OLGUN; MOURA, ESPERIDIANA A.B.
Propriedades térmicas e mecânicas de filmes flexíveis de polietileno e copolímero de etileno e álcool vinílico reforçados com óxido de grafeno.
In:
CONGRESSO BRASILEIRO DE POLIMEROS, 14.,
22-26 de outubro, 2017,
Águas de Lindóia, SP.
Anais...
2017.
p. 1797-1802.
Disponível em: http://repositorio.ipen.br/handle/123456789/29124. Acesso em: $DATA.
Esta referência é gerada automaticamente de acordo com as normas do estilo IPEN/SP (ABNT NBR 6023) e recomenda-se uma verificação final e ajustes caso necessário.
Como referenciar este item
-
KODAMA, YASKO
; BARSBAY, MURAT; GUVEN, OLGUN.
Radiation-induced and RAFT-mediated grafting of poly(hydroxyethyl methacrylate) (PHEMA) from cellulose surfaces.
Radiation Physics and Chemistry,
v. 94,
p. 98-104,
2014.
Palavras-Chave:
;
graft polymers;
methacrylates;
cellulose;
x radiation
KODAMA, YASKO; BARSBAY, MURAT; GUVEN, OLGUN.
Radiation-induced and RAFT-mediated grafting of poly(hydroxyethyl methacrylate) (PHEMA) from cellulose surfaces.
Radiation Physics and Chemistry,
v. 94,
p. 98-104,
2014.
Disponível em: http://repositorio.ipen.br/handle/123456789/9008. Acesso em: $DATA.
Esta referência é gerada automaticamente de acordo com as normas do estilo IPEN/SP (ABNT NBR 6023) e recomenda-se uma verificação final e ajustes caso necessário.
Como referenciar este item
-
GUVEN, OLGUN; MONTEIRO, SERGIO N.; MOURA, ESPERIDIANA A.B.
; DRELICH, JAROSLAW W..
Re-emerging field of lignocellulosic fiber – polymer composites and ionizing radiation technology in their formulation.
Polymer Reviews,
v. 56,
n. 4,
p. 1-35,
2016.
DOI:
10.1080/15583724.2016.1176037
Abstract:
Natural cellulose-based fibers offer low cost, low density composite
reinforcement with good strength and stiffness. Because of their
annual renewability and biodegradability, natural fibers have
materialized as environmentally-friendly alternatives to synthetic fibers
in the last two decades. They are replacing synthetic materials in some
traditional composites in industrial manufacturing sectors such as
automotive, construction, furniture, and other consumer goods. In this
work, the use of lignocellulosic fibers in green materials engineering,
particularly their application as polymeric composite reinforcement
and surface treatment via ionizing radiation are reviewed. Because
these cellulose-based materials are intrinsically hydrophilic, they
require surface modification to improve their affinity for hydrophobic
polymeric matrices, which enhances the strength, durability, and
service lifetime of the resulting lignocellulosic fiber-polymer
composites. In spite of a long history of using chemical methods in the
modification of material surfaces, including the surface of
lignocellulosic fibers, recent research leans instead towards application
of ionizing radiation. Ionizing radiation methods are considered
superior to chemical methods, as they are viewed as clean, energy
saving, and environmentally friendly. Recent applications of controlled
ionizing radiation doses in the formulation of natural fiber –reinforced
polymeric composites resulted in products with enhanced fiberpolymer
interfacial bonding without affecting the inner structure of
lignocellulosic fibers. These applications are critically reviewed in this
contribution.
Palavras-Chave:
gamma radiation;
composite materials;
ionizing radiations;
cellulose;
fibers;
plants
GUVEN, OLGUN; MONTEIRO, SERGIO N.; MOURA, ESPERIDIANA A.B.; DRELICH, JAROSLAW W.
Re-emerging field of lignocellulosic fiber – polymer composites and ionizing radiation technology in their formulation.
Polymer Reviews,
v. 56,
n. 4,
p. 1-35,
2016.
DOI:
10.1080/15583724.2016.1176037.
Disponível em: http://repositorio.ipen.br/handle/123456789/27161. Acesso em: $DATA.
Esta referência é gerada automaticamente de acordo com as normas do estilo IPEN/SP (ABNT NBR 6023) e recomenda-se uma verificação final e ajustes caso necessário.
Como referenciar este item
-
LODIS, ALINE M.
; SEIXAS, M.V. de S.
; VALENZUELA-DIAZ, FRANCISCO; GUVEN, OLGUN; MOURA, ESPERIDIANA A.B.
.
Structure and thermal/mechanical properties of poly (ϵ‐caprolactone)‐clay blend: synthesis and characterization of eva/clay flexible films treated by electron beam radiation.
In: PAN AMERICAN CONGRESS OF NANOTECHNOLOGY, 1st,
27-30 de novembro, 2017,
Guarujá, SP.
Abstract...
2017.
Abstract:
In the area of nanotechnology, polymer matrix based on nanocomposites have generated a significant amount of attention in the recent literature. The achieved results were at least initially viewed as unexpected (‘‘nano-effect’’) offering improved properties over that expected from thermal and mechanics predictions. This work presents the synthesis and characterization of EVA/Clay flexible films treated by electron beam radiation. EVA with 0.5 -3 wt.% of green Brazilian Clay addition were prepared by melt extrusion process, using a twin-screw extruder Haake Rheomex P332 with 16 mm and L/D = 25, from Thermo Scientific. Then, EVA/Clay nanocomposite was transformed into flexible films using a single-screw extruder with 25 mm diameter equipped with a flat die (laboratory line) and specimen test samples were obtained. Part of flexible film samples was submitted at electron beam radiation dose range 25-100 kGy using a 1.5 MeV electron beam accelerator, at room temperature in presence of air. The irradiated and non-irradiated samples were submitted to mechanical tests, XRD, UV-VIS, DSC, TG and FE-SEM analysis. The results showed significant changes in mechanical and thermal properties of EVA/CLAY flexible film due to clay addition and electron-beam irradiation. These results showed that it is possible to get interesting property in EVA flexible films by clay addition and electron-beam radiation treatment
LODIS, ALINE M.; SEIXAS, M.V. de S.; VALENZUELA-DIAZ, FRANCISCO; GUVEN, OLGUN; MOURA, ESPERIDIANA A.B.
Structure and thermal/mechanical properties of poly (ϵ‐caprolactone)‐clay blend: synthesis and characterization of eva/clay flexible films treated by electron beam radiation.
In:
PAN AMERICAN CONGRESS OF NANOTECHNOLOGY, 1st,
27-30 de novembro, 2017,
Guarujá, SP.
Abstract...
2017.
Disponível em: http://repositorio.ipen.br/handle/123456789/29042. Acesso em: $DATA.
Esta referência é gerada automaticamente de acordo com as normas do estilo IPEN/SP (ABNT NBR 6023) e recomenda-se uma verificação final e ajustes caso necessário.
Como referenciar este item
-
SANTANA, JULYANA G.
; AKBULUT, MESHUDE; TEMPERINI, MARCIA L.A.; RANGARI, VIJAY K.; GUVEN, OLGUN; MOURA, ESPERIDIANA
.
Synergistic effect of e-beam irradiation and graphene oxide incorporation on thermal, mechanical, and barrier properties of poly (ethylene-co-vinyl alcohol) film.
Radiation Physics and Chemistry,
v. 199,
p. 1-10,
2022.
DOI:
10.1016/j.radphyschem.2022.110343
Abstract:
Graphene and its derivatives, such as graphene oxide (GO), have attracted enormous interest from academia and industry because of its unique electrical, mechanical, and thermal properties, which can lead to enhanced material performance. In the present study, low contents of GO were incorporated into the poly (vinyl alcohol-co-ethylene) (EVOH). First, the GO was prepared by chemical oxidation of graphite employing a modified Hummer's method. The GO content of 0.1–0.3 wt % was incorporated in the EVOH matrix using a twin-screw extruder and extrusion blown film process to prepare flexible films. EVOH/GO film samples were irradiated at 100 kGy, using a 1.5 MeV electron-beam accelerator, at room temperature, in the presence of air. GO was characterized by XRD, ATR-FTIR, FE-SEM, and TEM analysis. XRD patterns of GO show a sharp reflection peak at 2θ = 10° (d001) corresponding to a d-spacing at 8.84 Å, characteristic of GO. The non-irradiated and irradiated samples were characterized by XRD, FEG-SEM, TG, DSC, oxygen transmission rate (OTR), UV/VIS analysis, and tensile tests. EVOH/GO nanocomposite films had an improved oxygen barrier, while also retaining fairly good transparency. As an effect of e-beam irradiation, the thermal, mechanical, and barrier behaviors of the nanocomposite films were even better than non-irradiated film samples, and obviously better than neat EVOH. Thus, the incorporation of low contents of GO followed by e-beam radiation treatment might be an interesting alternative to produce packaging materials based on EVOH with outstanding performance even under very humid conditions.
Palavras-Chave:
graphene;
oxide minerals;
synergism;
electron beam fusion reactors;
radiations;
polyethylenes;
tensile properties;
morphology
SANTANA, JULYANA G.; AKBULUT, MESHUDE; TEMPERINI, MARCIA L.A.; RANGARI, VIJAY K.; GUVEN, OLGUN; MOURA, ESPERIDIANA.
Synergistic effect of e-beam irradiation and graphene oxide incorporation on thermal, mechanical, and barrier properties of poly (ethylene-co-vinyl alcohol) film.
Radiation Physics and Chemistry,
v. 199,
p. 1-10,
2022.
DOI:
10.1016/j.radphyschem.2022.110343.
Disponível em: http://repositorio.ipen.br/handle/123456789/33467. Acesso em: $DATA.
Esta referência é gerada automaticamente de acordo com as normas do estilo IPEN/SP (ABNT NBR 6023) e recomenda-se uma verificação final e ajustes caso necessário.
Como referenciar este item
-
OIDE, MARIANE Y.T.; SATANA, JULYANA
; WELLEN, RENATE; VALENZUELA-DIAZ, FRANCISCO; GUVEN, OLGUN; MOURA, ESPERIDIANA
.
The influence of clay reinforcement on the properties of recycled polymer foams.
In: LI, BOWEN (Ed.); LI, JIAN (Ed.); IKHMAYIES, SHADIA (Ed.); ZHANG, MINGMING (Ed.); KALAY, YUNUS E. (Ed.); CARPENTER, JOHN S. (Ed.); HWANG, JIANN-YANG (Ed.); MONTEIRO, SERGIO N. (Ed.); FIRRAO, DONATO (Ed.); BROWN, ANDREW (Ed.); BAI, CHENGUANG (Ed.); PENG, ZHIWEI (Ed.); ESCOBEDO-DIAZ, JUAN P. (Ed.); GOSWAMI, RAMASIS (Ed.); KIM, JEONGGUK (Ed.).
Characterization of Minerals, Metals, and Materials. TMS.
Cham, CZ, Switzerland: Springer International Publishing AG,
2018.
p. 703-712,
(The Minerals, Metals & Materials Series).
DOI:
10.1007/978-3-319-72484-3_75
Abstract:
Poly [(ethylene)-co-(vinyl acetate)] (EVA) is a thermoplastic copolymer composed of randomly distributed polyethylene and polyvinyl acetate sequences within the molecular chain. EVA combines toughness with excellent flexibility, impact and puncture resistance. Because of these properties, this material is largely used for foam production as padding in equipment for various sports and as a shock absorber in sport’s shoes. This work aims to study the influence of clay reinforcement on the performance of recycled polymer foams. The blend containing recycled HDPE (high density polyethylene) and recycled EVA (70/30 wt%, respectively) reinforced with 2 wt% of clays were prepared by melt extrusion, using a twin-screw extruder to obtain the composites. The composites and foaming agent were fed into a special single screw extruder for foaming. The samples of HDPE/EVA/Clay foams were characterized by tensile test, Field Emission Scanning Electron Microscopy (FE-SEM), Thermogravimetric Analysis (TG), Differential Scanning Calorimetry (DSC), X-ray Diffraction (XRD), density measurement and the correlation between the results was evaluated.
Palavras-Chave:
polyethylenes;
polymerization;
polyvinyls;
clays;
foams;
nanocomposites
OIDE, MARIANE Y.T.; SATANA, JULYANA; WELLEN, RENATE; VALENZUELA-DIAZ, FRANCISCO; GUVEN, OLGUN; MOURA, ESPERIDIANA.
The influence of clay reinforcement on the properties of recycled polymer foams.
In:
LI, BOWEN (ed.); LI, JIAN (ed.); IKHMAYIES, SHADIA (ed.); ZHANG, MINGMING (ed.); KALAY, YUNUS E. (ed.); CARPENTER, JOHN S. (ed.); HWANG, JIANN-YANG (ed.); MONTEIRO, SERGIO N. (ed.); FIRRAO, DONATO (ed.); BROWN, ANDREW (ed.); BAI, CHENGUANG (ed.); PENG, ZHIWEI (ed.); ESCOBEDO-DIAZ, JUAN P. (ed.); GOSWAMI, RAMASIS (ed.); KIM, JEONGGUK (ed.).
Characterization of Minerals, Metals, and Materials. TMS.
Cham, CZ, Switzerland: Springer International Publishing AG,
2018.
p. 703-712.
(The Minerals, Metals & Materials Series).
DOI:
10.1007/978-3-319-72484-3_75.
Disponível em: http://repositorio.ipen.br/handle/123456789/28877. Acesso em: $DATA.
Esta referência é gerada automaticamente de acordo com as normas do estilo IPEN/SP (ABNT NBR 6023) e recomenda-se uma verificação final e ajustes caso necessário.
Como referenciar este item
Buscar no repositório
Navegar
-
Todo o repositório
-
Esta comunidade
Minha conta
Visualizar
A pesquisa no RD utiliza os recursos de busca da maioria das bases de dados. No entanto algumas dicas podem auxiliar para obter um resultado mais pertinente.
✔ É possível efetuar a busca de um autor ou um termo em todo o RD, por meio do
Buscar no Repositório
, isto é, o termo solicitado será localizado em qualquer campo do RD. No entanto esse tipo de pesquisa não é recomendada a não ser que se deseje um resultado amplo e generalizado.
✔ A pesquisa apresentará melhor resultado selecionando um dos filtros disponíveis em
Navegar
✔ Os filtros disponíveis em
Navegar
tais como: Coleções, Ano de publicação, Títulos, Assuntos, Autores, Revista, Tipo de publicação são autoexplicativos. O filtro,
Autores IPEN
apresenta uma relação com os autores vinculados ao IPEN; o
ID Autor IPEN
diz respeito ao número único de identificação de cada autor constante no RD e sob o qual estão agrupados todos os seus trabalhos independente das variáveis do seu nome;
Tipo de acesso
diz respeito à acessibilidade do documento, isto é , sujeito as leis de direitos autorais, ID RT apresenta a relação dos relatórios técnicos, restritos para consulta das comunidades indicadas.
A opção
Busca avançada
utiliza os conectores da lógica boleana, é o melhor recurso para combinar chaves de busca e obter documentos relevantes à sua pesquisa, utilize os filtros apresentados na caixa de seleção para refinar o resultado de busca. Pode-se adicionar vários filtros a uma mesma busca.
Exemplo:
Buscar os artigos apresentados em um evento internacional de 2015, sobre loss of coolant, do autor Maprelian.
Autor: Maprelian
Título: loss of coolant
Tipo de publicação: Texto completo de evento
Ano de publicação: 2015
✔ Para indexação dos documentos é utilizado o Thesaurus do INIS, especializado na área nuclear e utilizado em todos os países membros da
International Atomic Energy Agency – IAEA
, por esse motivo, utilize os termos de busca de assunto em inglês; isto não exclui a busca livre por palavras, apenas o resultado pode não ser tão relevante ou pertinente.
✔ 95% do RD apresenta o texto completo do documento com livre acesso, para aqueles que apresentam o significa que e o documento está sujeito as leis de direitos autorais, solicita-se nesses casos contatar a Biblioteca do IPEN,
bibl@ipen.br
.
✔ Ao efetuar a busca por um autor o RD apresentará uma relação de todos os trabalhos depositados no RD. No lado direito da tela são apresentados os coautores com o número de trabalhos produzidos em conjunto bem como os assuntos abordados e os respectivos anos de publicação agrupados.
✔ O RD disponibiliza um quadro estatístico de produtividade, onde é possível visualizar o número dos trabalhos agrupados por tipo de coleção, a medida que estão sendo depositados no RD.
✔ Na página inicial nas referências são sinalizados todos os autores IPEN, ao clicar nesse símbolo será aberta uma nova página correspondente à aquele autor – trata-se da página do pesquisador.
✔ Na página do pesquisador, é possível verificar, as variações do nome, a relação de todos os trabalhos com texto completo bem como um quadro resumo numérico; há links para o Currículo Lattes e o Google Acadêmico ( quando esse for informado).
ATENÇÃO!
ESTE TEXTO "AJUDA" ESTÁ SUJEITO A ATUALIZAÇÕES CONSTANTES, A MEDIDA QUE NOVAS FUNCIONALIDADES E RECURSOS DE BUSCA FOREM SENDO DESENVOLVIDOS PELAS EQUIPES DA BIBLIOTECA E DA INFORMÁTICA.
O gerenciamento do Repositório está a cargo da Biblioteca do IPEN. Constam neste RI, até o presente momento 20.950 itens que tanto podem ser artigos de periódicos ou de eventos nacionais e internacionais, dissertações e teses, livros, capítulo de livros e relatórios técnicos. Para participar do RI-IPEN é necessário que pelo menos um dos autores tenha vínculo acadêmico ou funcional com o Instituto. Nesta primeira etapa de funcionamento do RI, a coleta das publicações é realizada periodicamente pela equipe da Biblioteca do IPEN, extraindo os dados das bases internacionais tais como a Web of Science, Scopus, INIS, SciElo além de verificar o Currículo Lattes. O RI-IPEN apresenta também um aspecto inovador no seu funcionamento. Por meio de metadados específicos ele está vinculado ao sistema de gerenciamento das atividades do Plano Diretor anual do IPEN (SIGEPI). Com o objetivo de fornecer dados numéricos para a elaboração dos indicadores da Produção Cientifica Institucional, disponibiliza uma tabela estatística registrando em tempo real a inserção de novos itens. Foi criado um metadado que contém um número único para cada integrante da comunidade científica do IPEN. Esse metadado se transformou em um filtro que ao ser acionado apresenta todos os trabalhos de um determinado autor independente das variáveis na forma de citação do seu nome.
A elaboração do projeto do RI do IPEN foi iniciado em novembro de 2013, colocado em operação interna em julho de 2014 e disponibilizado na Internet em junho de 2015. Utiliza o software livre Dspace, desenvolvido pelo Massachusetts Institute of Technology (MIT). Para descrição dos metadados adota o padrão Dublin Core. É compatível com o Protocolo de Arquivos Abertos (OAI) permitindo interoperabilidade com repositórios de âmbito nacional e internacional.
1. Portaria IPEN-CNEN/SP nº 387, que estabeleceu os princípios que nortearam a criação do RDI,
clique aqui.
2. A experiência do Instituto de Pesquisas Energéticas e Nucleares (IPEN-CNEN/SP) na criação de um Repositório Digital Institucional – RDI,
clique aqui.
O Repositório Digital do IPEN é um equipamento institucional de acesso aberto, criado com o objetivo de reunir, preservar, disponibilizar e conferir maior visibilidade à Produção Científica publicada pelo Instituto, desde sua criação em 1956.
Operando, inicialmente como uma base de dados referencial o Repositório foi disponibilizado na atual plataforma, em junho de 2015. No Repositório está disponível o acesso ao conteúdo digital de artigos de periódicos, eventos, nacionais e internacionais, livros, capítulos, dissertações, teses e relatórios técnicos.
A elaboração do projeto do RI do IPEN foi iniciado em novembro de 2013, colocado em operação interna em julho de 2014 e disponibilizado na Internet em junho de 2015. Utiliza o software livre Dspace, desenvolvido pelo Massachusetts Institute of Technology (MIT). Para descrição dos metadados adota o padrão Dublin Core. É compatível com o Protocolo de Arquivos Abertos (OAI) permitindo interoperabilidade com repositórios de âmbito nacional e internacional.
O gerenciamento do Repositório está a cargo da Biblioteca do IPEN. Constam neste RI, até o presente momento 20.950 itens que tanto podem ser artigos de periódicos ou de eventos nacionais e internacionais, dissertações e teses, livros, capítulo de livros e relatórios técnicos. Para participar do RI-IPEN é necessário que pelo menos um dos autores tenha vínculo acadêmico ou funcional com o Instituto. Nesta primeira etapa de funcionamento do RI, a coleta das publicações é realizada periodicamente pela equipe da Biblioteca do IPEN, extraindo os dados das bases internacionais tais como a Web of Science, Scopus, INIS, SciElo além de verificar o Currículo Lattes. O RI-IPEN apresenta também um aspecto inovador no seu funcionamento. Por meio de metadados específicos ele está vinculado ao sistema de gerenciamento das atividades do Plano Diretor anual do IPEN (SIGEPI). Com o objetivo de fornecer dados numéricos para a elaboração dos indicadores da Produção Cientifica Institucional, disponibiliza uma tabela estatística registrando em tempo real a inserção de novos itens. Foi criado um metadado que contém um número único para cada integrante da comunidade científica do IPEN. Esse metadado se transformou em um filtro que ao ser acionado apresenta todos os trabalhos de um determinado autor independente das variáveis na forma de citação do seu nome.