Navegação IPEN por assunto "jets"

Classificar por: Ordenar: Resultados:

  • IPEN-DOC 28099

    ZUFFI, ARMANDO V.F. ; MALDONADO, EDISON P.; VIEIRA JUNIOR, NILSON D. ; SAMAD, RICARDO E. . Development of a modified Mach–Zehnder interferometer for time and space density measurements for laser wakefield acceleration. In: SBFOTON INTERNATIONAL OPTICS AND PHOTONICS CONFERENCE, May 31 - June 2, 2021, Online. Proceedings... Piscataway, NJ, USA: IEEE, 2021. DOI: 10.1109/SBFOTONIOPC50774.2021.9461961

    Abstract: This work reports the development of a modified Mach–Zehnder interferometer aimed at determining the density of gas targets and laser generated plasmas, in time and space. This interferometer will compose our laboratory implementations for laser wakefield acceleration, allowing the characterizations of gas jet profiles generated by submillimeter nozzles. The technique also allows us to estimate the temporal evolution of the plasma density.

    Palavras-Chave: interferometry; wakefield accelerators; lasers; jets; measuring methods; plasma density

  • IPEN-DOC 22797

    BEU, CASSIA M.L. ; MARQUES, MARCIA T.A. ; NAKAEMA, WALTER M. ; SAKAGAMI, YOSHIAKI; SANTOS, PEDRO A.A.; MOREIRA, A.C. de C.A.; LANDULFO, EDUARDO . Estimation of turbulence production by nocturnal low-level jets in Sao Paulo (Brazil). In: ERBERTSEDER, THILO (Ed.); ESCH, THOMAS (Ed.); CHRYSOULAKIS, NEKTARIOS (Ed.) REMOTE SENSING TECHNOLOGIES AND APPLICATIONS IN URBAN ENVIRONMENTS, September 26, 2016, Edinburgh, United Kingdom. Proceedings... Society of Photo-optical Instrumentation Engineers, 2016. (SPIE Proceedings Series, 10008).

    Abstract: Two Doppler lidars were recently used to collect data from the planetary boundary layer (PBL) in Sao Paulo city (23º32’S, 46 º38’W). The measurement campaign was carried out from December-2015 to February-2016, during the summer, which is the rainy season. Although Sao Paulo is the main city of a huge metropolitan region with more than 11 million of inhabitants and 7 millions of vehicles, according to the government agencies, the lack of PBL observational data is still a limitation for the atmospheric dispersion studies. Therefore, this work should contribute to the comprehension of PBL mechanisms and also for future atmospheric modeling studies. The data revealed that the nocturnal low-level jets (LLJs) frequently occurred along those 3 months, but its height is highly variable, from 100 m up to 650 m. It was also seen that the nocturnal LLJs can extend for several hours, right before the sunset until sunrise. This work aims to investigate the turbulence production by the nocturnal LLJs and its influence into the stable boundary layer (SBL).

    Palavras-Chave: optical radar; turbulence; jets; boundary layers; simulation; earth atmosphere; environment; urban areas

  • IPEN-DOC 25256

    BEU, CASSIA M.L. ; ESPINDOLA, FELIPE D.C.; LANDULFO, EDUARDO . Low-Level Jet observational study for the Brazilian Nuclear Reactor region. In: COMERON, ADOLFO (Ed.); KASSIANOV, EVGUENI I. (Ed.); SCHAFER, KLAUS (Ed.); PICARD, RICHARD H. (Ed.); WEBER, KONRADIN (Ed.) REMOTE SENSING OF CLOUDS AND THE ATMOSPHERE, 23th, September 10-13, 2018, Berlin, Germany. Proceedings... Bellingham, WA, USA: Society of Photo-optical Instrumentation Engineers, 2018. p. 1078616-1 - 1078616-18. (SPIE Proceedings Series, 10786). DOI: 10.1117/12.2325476

    Abstract: A doppler wind lidar was employed to investigate the features of the Low-Level Jet (LLJ) at Ipero, Sao Paulo State, Brazil. The Ipero Municipality already host a nuclear facility for uranium enrichment and a new plant, a nuclear reactor, is planned to be built there. The nuclear activities require a good understanding of atmospheric dispersion, as for normal operation conditions as for accidental emissions. The LLJ is a natural phenomenon that may occur within the Planetary Boundary Layer and plays an important role for the atmospheric dispersion. Knowing the LLJ characteristics is essential to evaluate the performances of the weather forecast models that are used as input for the atmospheric dispersion models. The field campaign results showed that the LLJs occur with high frequency at Ipero and that the Stable Boundary Layer (SBL) is shallow, which in turn is unfavored for pollutant dilution because all surface emissions remain confined within the SBL. The 2 weather forecast models evaluated didn´t reproduce the LLJ, despite their high horizontal resolution. The numerical models also underestimated the wind speed. Both the LLJ and the wind speed are key parameters for dispersion simulations. As the weather forecast models diverge of the observational data, they must be better parameterized for provide reliable simulations before being adopted as input for any atmospheric dispersion models. The field campaign (planned to extend for 1 year) data are essential for the parameterization of the numerical models.

    Palavras-Chave: atmospheres; planetary atmospheres; wind loads; jets; fluid flow; boundary layers; brazil; dispersions; nuclear facilities; rmb reactor; isotope separation plants; atmospheric precipitations; meteorology

  • IPEN-DOC 00621

    DIAZ DIEGUEZ, J.A. . A theoretical study of the transference of heat and momentum across turbulent incompressible boundary layers. 1977. Tese (Doutoramento) - University of London, London. p. Orientador: J Wood.

    Palavras-Chave: boundary layers; ducts; flow models; heat transfer; incompressible flow; jets; turbulent flow

  • IPEN-DOC 26791

    BEU, CASSIA M.L. ; LANDULFO, EDUARDO . Threshold wind speed and turbulence under LLJs events at Ipero - Brazil. In: COMERON, ADOLFO (Ed.); KASSIANOV, EVGUENI I. (Ed.); SCHAFER, KLAUS (Ed.); PICARD, RICHARD H. (Ed.); WEBER, KONRADIN (Ed.); SINGH, UPENDRA N. (Ed.) SPIE REMOTE SENSING, September 9-12, 2019, Strasbourg, France. Proceedings... Bellingham, WA, USA: SPIE, 2019. p. 1115212-1 - 1115212-10. (Proceedings of SPIE Vol. 11152, Remote Sensing of Clouds and the Atmosphere XXIV). DOI: 10.1117/12.2532281

    Abstract: The threshold wind speed is a useful criterion in determining whether strong turbulence is generated within the Stable Boundary Layer (SBL), the layer where all surface emissions remain con ned during the night. Con dence turbulence estimates are extremely important for atmospheric transport and dispersion simulations, although due to its complex dinamics many aspects of the SBL are neglected by numerical models that, in turn, are the inputs and boundary conditions for the transport and dispersion simulations. Turbulence is especially important during severe episodies like hazardous material accidental releases, for example. Turbulence intensity can a ect the dispersion speed, released material concentration, and its reach. For many decades, remote sensing has been an important tool in lling the gap of information and providing advances in the atmospheric sciences. The doppler lidar is increasingly being used for micrometeoroly and Planetary Boundary Layer (PBL) studies because of its autonomy and long range capability, in contrast with traditional techniques as radioprobes and captive balloons. After 1 year of continuous measurements with a doppler lidar, it was possible to determine the threshold wind speed for Ipero, Sao Paulo, Brazil. Besides threshold wind speed, it was observed that the SBL turbulence has a straight relationship with the Low-Level Jets (LLJs) that frequently occur over the region. The vertical turbulence distribution depends greatly on the LLJ characteristics, which in turn is highly variable during its life cycle. The strong turbulence regime is associated to the stronger LLJs, that presents a more de ned pattern. In contrast, weak LLJs (that generate weaker SBL turbulence) present more dispersive characteristics in respect to the entire dataset. These di erences are seen both for the LLJ height as for the turbulence vertical pro le. These results will contribute for the atmospheric modeling and dispersion simulations, as well for the environmental studies at Ipero.

    Palavras-Chave: wind; earth atmosphere; dispersions; jets; boundary layers

  • IPEN-DOC 29042

    BEU, CASSIA M.L. ; LANDULFO, EDUARDO . Turbulence kinetic energy dissipation rate estimate for a low-level jet with Doppler lidar data: a case study. Earth Interactions, v. 26, n. 1, p. 112-121, 2022. DOI: 10.1175/EI-D-20-0027.1

    Abstract: Low-level jets are a recurrent feature of our study area in Ipero municipality of southeastern Brazil. They grow very near the surface as shown by this case study. These two aspects increase the needs for a realistic modeling of the low-level jet to simulate the atmospheric dispersion of industrial emissions. In this concern, we applied a recently proposed technique to estimate the turbulence kinetic energy dissipation rate of a low-level jet case with Doppler lidar data. This low-level jet remained for its entire lifetime (around 12 h) within a shallow layer (under 300 m); beyond this, we did not notice a remarkable directional shear as in other studies. Even for a shallow layer as for this study case, we observed strong spatiotemporal variability of the turbulence kinetic energy dissipation rate. We also detected a channel connecting the layers above and below the low-level jet that may be an exchange channel of their properties.

    Palavras-Chave: optical radar; turbulence; transverse energy; atmospheric circulation; boundary layers; jets

A pesquisa no RD utiliza os recursos de busca da maioria das bases de dados. No entanto algumas dicas podem auxiliar para obter um resultado mais pertinente.

É possível efetuar a busca de um autor ou um termo em todo o RD, por meio do Buscar no Repositório , isto é, o termo solicitado será localizado em qualquer campo do RD. No entanto esse tipo de pesquisa não é recomendada a não ser que se deseje um resultado amplo e generalizado.

A pesquisa apresentará melhor resultado selecionando um dos filtros disponíveis em Navegar

Os filtros disponíveis em Navegar tais como: Coleções, Ano de publicação, Títulos, Assuntos, Autores, Revista, Tipo de publicação são autoexplicativos. O filtro, Autores IPEN apresenta uma relação com os autores vinculados ao IPEN; o ID Autor IPEN diz respeito ao número único de identificação de cada autor constante no RD e sob o qual estão agrupados todos os seus trabalhos independente das variáveis do seu nome; Tipo de acesso diz respeito à acessibilidade do documento, isto é , sujeito as leis de direitos autorais, ID RT apresenta a relação dos relatórios técnicos, restritos para consulta das comunidades indicadas.

A opção Busca avançada utiliza os conectores da lógica boleana, é o melhor recurso para combinar chaves de busca e obter documentos relevantes à sua pesquisa, utilize os filtros apresentados na caixa de seleção para refinar o resultado de busca. Pode-se adicionar vários filtros a uma mesma busca.

Exemplo:

Buscar os artigos apresentados em um evento internacional de 2015, sobre loss of coolant, do autor Maprelian.

Autor: Maprelian

Título: loss of coolant

Tipo de publicação: Texto completo de evento

Ano de publicação: 2015

Para indexação dos documentos é utilizado o Thesaurus do INIS, especializado na área nuclear e utilizado em todos os países membros da International Atomic Energy Agency – IAEA , por esse motivo, utilize os termos de busca de assunto em inglês; isto não exclui a busca livre por palavras, apenas o resultado pode não ser tão relevante ou pertinente.

95% do RD apresenta o texto completo do documento com livre acesso, para aqueles que apresentam o significa que e o documento está sujeito as leis de direitos autorais, solicita-se nesses casos contatar a Biblioteca do IPEN, bibl@ipen.br .

Ao efetuar a busca por um autor o RD apresentará uma relação de todos os trabalhos depositados no RD. No lado direito da tela são apresentados os coautores com o número de trabalhos produzidos em conjunto bem como os assuntos abordados e os respectivos anos de publicação agrupados.

O RD disponibiliza um quadro estatístico de produtividade, onde é possível visualizar o número dos trabalhos agrupados por tipo de coleção, a medida que estão sendo depositados no RD.

Na página inicial nas referências são sinalizados todos os autores IPEN, ao clicar nesse símbolo será aberta uma nova página correspondente à aquele autor – trata-se da página do pesquisador.

Na página do pesquisador, é possível verificar, as variações do nome, a relação de todos os trabalhos com texto completo bem como um quadro resumo numérico; há links para o Currículo Lattes e o Google Acadêmico ( quando esse for informado).

ATENÇÃO!

ESTE TEXTO "AJUDA" ESTÁ SUJEITO A ATUALIZAÇÕES CONSTANTES, A MEDIDA QUE NOVAS FUNCIONALIDADES E RECURSOS DE BUSCA FOREM SENDO DESENVOLVIDOS PELAS EQUIPES DA BIBLIOTECA E DA INFORMÁTICA.

O gerenciamento do Repositório está a cargo da Biblioteca do IPEN. Constam neste RI, até o presente momento 20.950 itens que tanto podem ser artigos de periódicos ou de eventos nacionais e internacionais, dissertações e teses, livros, capítulo de livros e relatórios técnicos. Para participar do RI-IPEN é necessário que pelo menos um dos autores tenha vínculo acadêmico ou funcional com o Instituto. Nesta primeira etapa de funcionamento do RI, a coleta das publicações é realizada periodicamente pela equipe da Biblioteca do IPEN, extraindo os dados das bases internacionais tais como a Web of Science, Scopus, INIS, SciElo além de verificar o Currículo Lattes. O RI-IPEN apresenta também um aspecto inovador no seu funcionamento. Por meio de metadados específicos ele está vinculado ao sistema de gerenciamento das atividades do Plano Diretor anual do IPEN (SIGEPI). Com o objetivo de fornecer dados numéricos para a elaboração dos indicadores da Produção Cientifica Institucional, disponibiliza uma tabela estatística registrando em tempo real a inserção de novos itens. Foi criado um metadado que contém um número único para cada integrante da comunidade científica do IPEN. Esse metadado se transformou em um filtro que ao ser acionado apresenta todos os trabalhos de um determinado autor independente das variáveis na forma de citação do seu nome.

A elaboração do projeto do RI do IPEN foi iniciado em novembro de 2013, colocado em operação interna em julho de 2014 e disponibilizado na Internet em junho de 2015. Utiliza o software livre Dspace, desenvolvido pelo Massachusetts Institute of Technology (MIT). Para descrição dos metadados adota o padrão Dublin Core. É compatível com o Protocolo de Arquivos Abertos (OAI) permitindo interoperabilidade com repositórios de âmbito nacional e internacional.

1. Portaria IPEN-CNEN/SP nº 387, que estabeleceu os princípios que nortearam a criação do RDI, clique aqui.


2. A experiência do Instituto de Pesquisas Energéticas e Nucleares (IPEN-CNEN/SP) na criação de um Repositório Digital Institucional – RDI, clique aqui.

O Repositório Digital do IPEN é um equipamento institucional de acesso aberto, criado com o objetivo de reunir, preservar, disponibilizar e conferir maior visibilidade à Produção Científica publicada pelo Instituto, desde sua criação em 1956.

Operando, inicialmente como uma base de dados referencial o Repositório foi disponibilizado na atual plataforma, em junho de 2015. No Repositório está disponível o acesso ao conteúdo digital de artigos de periódicos, eventos, nacionais e internacionais, livros, capítulos, dissertações, teses e relatórios técnicos.

A elaboração do projeto do RI do IPEN foi iniciado em novembro de 2013, colocado em operação interna em julho de 2014 e disponibilizado na Internet em junho de 2015. Utiliza o software livre Dspace, desenvolvido pelo Massachusetts Institute of Technology (MIT). Para descrição dos metadados adota o padrão Dublin Core. É compatível com o Protocolo de Arquivos Abertos (OAI) permitindo interoperabilidade com repositórios de âmbito nacional e internacional.

O gerenciamento do Repositório está a cargo da Biblioteca do IPEN. Constam neste RI, até o presente momento 20.950 itens que tanto podem ser artigos de periódicos ou de eventos nacionais e internacionais, dissertações e teses, livros, capítulo de livros e relatórios técnicos. Para participar do RI-IPEN é necessário que pelo menos um dos autores tenha vínculo acadêmico ou funcional com o Instituto. Nesta primeira etapa de funcionamento do RI, a coleta das publicações é realizada periodicamente pela equipe da Biblioteca do IPEN, extraindo os dados das bases internacionais tais como a Web of Science, Scopus, INIS, SciElo além de verificar o Currículo Lattes. O RI-IPEN apresenta também um aspecto inovador no seu funcionamento. Por meio de metadados específicos ele está vinculado ao sistema de gerenciamento das atividades do Plano Diretor anual do IPEN (SIGEPI). Com o objetivo de fornecer dados numéricos para a elaboração dos indicadores da Produção Cientifica Institucional, disponibiliza uma tabela estatística registrando em tempo real a inserção de novos itens. Foi criado um metadado que contém um número único para cada integrante da comunidade científica do IPEN. Esse metadado se transformou em um filtro que ao ser acionado apresenta todos os trabalhos de um determinado autor independente das variáveis na forma de citação do seu nome.