Navegação Eventos - Artigos por Autores IPEN "LAPOLLI, ANDRE L."

Classificar por: Ordenar: Resultados:

  • IPEN-DOC 24100

    LAPOLLI, ANDRE L. ; SECCO, MARCELLO ; GENEZINI, FREDERICO A. ; ZAHN, GUILHERME S. ; MOREIRA, EDSON G. . Automated spectrometer interface for measurement of short half-life samples for neutron activation analysis. In: INTERNATIONAL NUCLEAR ATLANTIC CONFERENCE, October 22-27, 2017, Belo Horizonte, MG. Proceedings... Rio de Janeiro, RJ: Associação Brasileira de Energia Nuclear, 2017.

    Abstract: In this paper a source positioning system was developed, based on a HPGe detector coupled to a Canberra DAS 1000 data acquisition system and Canberra’s GENIE2K software and libraries. The system is composed of a step motor coupled to an Arduino Uno microcontroller, which is programmed using C language to allow for a source-detector distance between 0.3 and 20 cm - both components are coupled to a PC computer using the USB interface. In order to allow automated data acquisition, two additional pieces of software were developed. The first one, a Human-Machine Interface (HMI) programmed in Visual Basic 6, allows the programming and monitoring of the data acquisition process, and the other, in REXX language, controls the data acquisition process in the background. The HMI is user-friendly and versatile, so that the even rather complex data acquisition processes may be easily programmed. When the experiment scheme is saved, two files are created and used by the REXX code to control the acquisition process so that the data acquisition is automatically stopped and saved after a user-defined time, then the source is repositioned and data acquisition is cleared and restarted. While in the present stage the system only offers three distinct source positions, finer source-position adjusting is under development. In its present configuration the system has been tested for stability and repeatability in all three positions, with an excellent performance.

    Palavras-Chave: neutron activation analysis; spectrometers; equipment interfaces; biological half-life; high-purity ge detectors; automation; data acquisition systems; distance; brazilian cnen

  • IPEN-DOC 24130

    STACHOWSKI, ADEMIR F.A. ; LAPOLLI, ANDRE L. ; CARBONARI, ARTUR W. ; SAXENA, RAJENDRA N. . Control system and automation of the spectrum acquisition for a perturbed gamma-gamma angular correlation spectrometer. In: INTERNATIONAL NUCLEAR ATLANTIC CONFERENCE, October 22-27, 2017, Belo Horizonte, MG. Proceedings... Rio de Janeiro, RJ: Associação Brasileira de Energia Nuclear, 2017.

    Abstract: This work reports results from the automation of data acquisition for a gamma-gamma perturbed angular correlation (PAC) spectrometer located in the hyperfine interactions laboratory (LIH) of IPEN. A PAC spectrometer comprises usually four scintillation detectors (BaF3 for example) and carries out time measurements from gamma rays of any two combinations of detectors in coincidence. Gamma rays come from the decay of probe nuclei embedded into the material to be studied. Measurements are generally performed as a function of temperature. The fourth-detectors PAC spectrometer was automated in Java language because it is a multiplatform and object oriented programming language, having, therefore, portability and longer lifetime due to the ease of implementation of peripherals. Finally, the software has a friendly and intuitive interface with the user being able to operate the hardware manually or automatically with time acquisitions up to 100 consecutive hours. Before each acquisition, the software sets the temperature, waits for temperature stability and records data in different files. Moreover, the software also saves in a file all information of relevant parameters during acquisition.

    Palavras-Chave: computer codes; data acquisition systems; hyperfine structure; perturbed angular correlation; temperature control

  • IPEN-DOC 19433

    DOMIENIKAN, CLAUDIO ; LAPOLLI, ANDRE L. ; SCHOUERI, ROBERTO M. ; MOREIRA, EDSON G. ; VASCONCELLOS, MARINA B.A. . Development and installation of an automatic sample changer for neutron activation analysis. In: INTERNATIONAL NUCLEAR ATLANTIC CONFERENCE; MEETING ON NUCLEAR APPLICATIONS, 11th; MEETING ON REACTOR PHYSICS AND THERMAL HYDRAULICS, 18th; MEETING ON NUCLEAR INDUSTRY, 3rd, November 24-29, 2013, Recife, PE. Proceedings... Sao Paulo: ABEN, 2013, 2013.

    Palavras-Chave: automation; brazilian cnen; computer codes; construction; design; electronic circuits; neutron activation analysis; sample changers

  • IPEN-DOC 19437

    LAPOLLI, ANDRE L. ; ZAHN, GUILHERME S. . Development of a multiplatform and multi parameter data acquisition interface. In: INTERNATIONAL NUCLEAR ATLANTIC CONFERENCE; MEETING ON NUCLEAR APPLICATIONS, 11th; MEETING ON REACTOR PHYSICS AND THERMAL HYDRAULICS, 18th; MEETING ON NUCLEAR INDUSTRY, 3rd, November 24-29, 2013, Recife, PE. Proceedings... Sao Paulo: ABEN, 2013, 2013.

    Palavras-Chave: brazilian cnen; data acquisition; data acquisition systems; data processing; equipment interfaces; multi-parameter analysis; nuclear data collections; real time systems

  • IPEN-DOC 15082

    LAPOLLI, ANDRE L. ; YAMAGISHI, SUELI; DOMIENIKAN, CLAUDIO ; SCHOUERI, ROBERTO M. ; CARBONARI, ARTUR W. ; SAXENA, RAJENDRA N. . Development of an object-oriented software based on fuzzy-logic for controlling temperatures in pac experiments. In: INTERNATIONAL NUCLEAR ATLANTIC CONFERENCE; MEETING ON NUCLEAR APPLICATIONS, 9th; MEETING ON REACTOR PHYSICS AND THERMAL HYDRAULICS, 16th; MEETING ON NUCLEAR INDUSTRY, 1st, September 27 - October 2, 2009, Rio de Janeiro, RJ. Proceedings... Sao Paulo: ABEN, 2009, 2009.

    Palavras-Chave: algorithms; data acquisition systems; data acquisition; furnaces; fuzzy logic; java; m codes; perturbed angular correlation; temperature control; temperature dependence; v codes

  • IPEN-DOC 16881

    LAPOLLI, ANDRE L. ; MUNITA, CASIMIRO S. . Development of system using the library of the genie spectroscopy software and exchange of samples. In: INTERNATIONAL NUCLEAR ATLANTIC CONFERENCE; MEETING ON NUCLEAR APPLICATIONS, 10th; MEETING ON REACTOR PHYSICS AND THERMAL HYDRAULICS, 17th; MEETING ON NUCLEAR INDUSTRY, 2nd, October 24-28, 2011, Belo Horizonte, MG. Proceedings... Sao Paulo: ABEN, 2011, 2011.

    Palavras-Chave: laboratories; sample preparation; materials handling; automation; programming; data acquisition; accuracy

  • IPEN-DOC 17065

    DOMIENIKAN, CLAUDIO ; LAPOLLI, ANDRE L. ; TOLEDO, FABIO de ; ZANINI, AMELIA Y.K.; TRINDADE, GIVANILSON da S.. Electronic module for 6-BaFsub(2) - detectors positioning control. In: INTERNATIONAL NUCLEAR ATLANTIC CONFERENCE; MEETING ON NUCLEAR APPLICATIONS, 10th; MEETING ON REACTOR PHYSICS AND THERMAL HYDRAULICS, 17th; MEETING ON NUCLEAR INDUSTRY, 2nd, October 24-28, 2011, Belo Horizonte, MG. Proceedings... Sao Paulo: ABEN, 2011, 2011.

    Palavras-Chave: radiation detectors; barium fluorides; perturbed angular correlation; spectrometers; electronic circuits; control; motors; coincidence methods

  • IPEN-DOC 19260

    SILVA, ANDREIA dos S.; CARBONARI, ARTUR W. ; LAPOLLI, ANDRE L. ; SAXENA, RAJENDRA N. ; SAITOVITCH, HENRIQUE. Investigation of hyperfine interactions in DNA nitrogenous bases using perturbed angular correlation spectroscopy. In: INTERNATIONAL NUCLEAR ATLANTIC CONFERENCE; MEETING ON NUCLEAR APPLICATIONS, 11th; MEETING ON REACTOR PHYSICS AND THERMAL HYDRAULICS, 18th; MEETING ON NUCLEAR INDUSTRY, 3rd, November 24-29, 2013, Recife, PE. Proceedings... Sao Paulo: ABEN, 2013, 2013.

    Palavras-Chave: aqueous solutions; cadmium 111; dna; hyperfine structure; indium 111; interactions; molecules; nitrogen compounds; perturbed angular correlation; probes; spectroscopy

  • IPEN-DOC 16856

    AMARAL, ANTONIO A.; SILVA, ANDREIA dos S.; LAPOLLI, ANDRE L. ; CARBONARI, ARTUR W. ; SAXENA, RAJENDRA N. . Investigation of hyperfine interactions in hafnioum compounds with Fsup(1-), OHsup(1-), and EDTA ligants by perturbed 'gamma-gamma' angular correlation. In: INTERNATIONAL NUCLEAR ATLANTIC CONFERENCE; MEETING ON NUCLEAR APPLICATIONS, 10th; MEETING ON REACTOR PHYSICS AND THERMAL HYDRAULICS, 17th; MEETING ON NUCLEAR INDUSTRY, 2nd, October 24-28, 2011, Belo Horizonte, MG. Proceedings... Sao Paulo: ABEN, 2011, 2011.

    Palavras-Chave: hyperfine structure; interactions; potassium; hafnium 181; tantalum 181; probes; nuclei; aqueous solutions; edta; perturbed angular correlation

  • IPEN-DOC 24129

    LAPOLLI, ANDRE L. ; BARCELLOS, HENRIQUE ; MATSUDA, HYLTON ; SUMIYA, LUIZ C. do A. ; JUNQUEIRA, FERNANDO de C. . A new 124Xe irradiation system for 123I routine production at the 30 MeV IPEN-CNEN/SP cyclotron. In: INTERNATIONAL NUCLEAR ATLANTIC CONFERENCE, October 22-27, 2017, Belo Horizonte, MG. Proceedings... Rio de Janeiro, RJ: Associação Brasileira de Energia Nuclear, 2017.

    Abstract: Since 2001 the Nuclear and Energy Research Institute (IPEN/CNEN-SP, Brazil) has produced about 2.5 mCi/mAh of 123I weekly using a manual irradiation system fully developed by its researchers. Ultrapure 123I has been produced and distributed to hospitals and clinics where several diagnostic imaging procedures are done for thyroid, brain and cardiovascular functions. Due to the short half-life and emission of low-energy photons, this radioisotope becomes suitable for diagnosis in children. Currently IPEN researchers are involved in the development of a new fully automated irradiation system dedicated to 123I routine production employing enriched xenon gas (124Xe) as the target material. This new system consists of a target port, a water and a helium cooling system, a cryogenic system, an electric power system, a control and process monitoring unit composed of a supervisory software connected to a Programmable Logic Controller (PLC) via personal computer. In this new concept, there is no need for human interference during radioisotope production, reducing the possibility of eventual failures or incidents involving radioactive material. In this way, with this new system, a specific yield of approximately 3.5 mCi/mAh per irradiation is expected and this will meet a large part of the national demand for this important radioisotope. In the present work will be presented all the technical and constructive aspects of this new system as well as the results obtained in the irradiation of tests.

    Palavras-Chave: automation; cyclotrons; iodine 123; irradiation devices; isotope production; performance testing; remote control; xenon 124

  • IPEN-DOC 15078

    DOMIENIKAN, CLAUDIO ; LAPOLLI, ANDRE L. ; CARBONARI, ARTUR W. ; SAXENA, RAJENDRA N. ; SCHOUERI, ROBERTO M. . PAC spectrometer with six-baf sub(2)detectors. In: INTERNATIONAL NUCLEAR ATLANTIC CONFERENCE; MEETING ON NUCLEAR APPLICATIONS, 9th; MEETING ON REACTOR PHYSICS AND THERMAL HYDRAULICS, 16th; MEETING ON NUCLEAR INDUSTRY, 1st, September 27 - October 2, 2009, Rio de Janeiro, RJ. Proceedings... Sao Paulo: ABEN, 2009, 2009.

    Palavras-Chave: analog-to-digital converters; barium fluorides; coincidence spectrometry; data processing; experimental data; l codes; perturbed angular correlation; solid scintillation detectors; spectrometers

  • IPEN-DOC 15041

    AMARAL, ANTONIO A.; SILVA, ANDREIA S.; CARBONARI, ARTUR W. ; LAPOLLI, ANDRE L. . Study of dynamic behavior of EDTA molecule in solution using perturbed gamma-gamma angular correlation spectroscopy. In: INTERNATIONAL NUCLEAR ATLANTIC CONFERENCE; MEETING ON NUCLEAR APPLICATIONS, 9th; MEETING ON REACTOR PHYSICS AND THERMAL HYDRAULICS, 16th; MEETING ON NUCLEAR INDUSTRY, 1st, September 27 - October 2, 2009, Rio de Janeiro, RJ. Proceedings... Sao Paulo: ABEN, 2009, 2009.

    Palavras-Chave: aqueous solutions; edta; experimental data; gamma spectroscopy; hafnium 181; hyperfine structure; perturbed angular correlation; ph value; tantalum 181

  • IPEN-DOC 24038

    CARVALHO, PRISCILLA R. ; MUNITA, CASIMIRO S. ; LAPOLLI, ANDRE L. . Validity studies among hierarchical methods of cluster analysis using cophenetic correlation coefficient. In: INTERNATIONAL NUCLEAR ATLANTIC CONFERENCE, October 22-27, 2017, Belo Horizonte, MG. Proceedings... Rio de Janeiro, RJ: Associação Brasileira de Energia Nuclear, 2017.

    Abstract: The literature presents many methods for partitioning of data base, and is difficult choose which is the most suitable, since the various combinations of methods based on different measures of dissimilarity can lead to different patterns of grouping and false interpretations. Nevertheless, little effort has been expended in evaluating these methods empirically using an archaeological data base. In this way, the objective of this work is make a comparative study of the different cluster analysis methods and identify which is the most appropriate. For this, the study was carried out using a data base of the Archaeometric Studies Group from IPEN-CNEN/SP, in which 45 samples of ceramic fragments from three archaeological sites were analyzed by instrumental neutron activation analysis (INAA) which were determinated the mass fraction of 13 elements (As, Ce, Cr, Eu, Fe, Hf, La, Na, Nd, Sc, Sm, Th, U). The methods used for this study were: single linkage, complete linkage, average linkage, centroid and Ward. The validation was done using the cophenetic correlation coefficient and comparing these values the average linkage method obtained better results. A script of the statistical program R with some functions was created to obtain the cophenetic correlation. By means of these values was possible to choose the most appropriate method to be used in the data base.

    Palavras-Chave: archaeology; ceramics; cluster analysis; comparative evaluations; elements; multivariate analysis; quality control; validation

A pesquisa no RD utiliza os recursos de busca da maioria das bases de dados. No entanto algumas dicas podem auxiliar para obter um resultado mais pertinente.

É possível efetuar a busca de um autor ou um termo em todo o RD, por meio do Buscar no Repositório , isto é, o termo solicitado será localizado em qualquer campo do RD. No entanto esse tipo de pesquisa não é recomendada a não ser que se deseje um resultado amplo e generalizado.

A pesquisa apresentará melhor resultado selecionando um dos filtros disponíveis em Navegar

Os filtros disponíveis em Navegar tais como: Coleções, Ano de publicação, Títulos, Assuntos, Autores, Revista, Tipo de publicação são autoexplicativos. O filtro, Autores IPEN apresenta uma relação com os autores vinculados ao IPEN; o ID Autor IPEN diz respeito ao número único de identificação de cada autor constante no RD e sob o qual estão agrupados todos os seus trabalhos independente das variáveis do seu nome; Tipo de acesso diz respeito à acessibilidade do documento, isto é , sujeito as leis de direitos autorais, ID RT apresenta a relação dos relatórios técnicos, restritos para consulta das comunidades indicadas.

A opção Busca avançada utiliza os conectores da lógica boleana, é o melhor recurso para combinar chaves de busca e obter documentos relevantes à sua pesquisa, utilize os filtros apresentados na caixa de seleção para refinar o resultado de busca. Pode-se adicionar vários filtros a uma mesma busca.

Exemplo:

Buscar os artigos apresentados em um evento internacional de 2015, sobre loss of coolant, do autor Maprelian.

Autor: Maprelian

Título: loss of coolant

Tipo de publicação: Texto completo de evento

Ano de publicação: 2015

Para indexação dos documentos é utilizado o Thesaurus do INIS, especializado na área nuclear e utilizado em todos os países membros da International Atomic Energy Agency – IAEA , por esse motivo, utilize os termos de busca de assunto em inglês; isto não exclui a busca livre por palavras, apenas o resultado pode não ser tão relevante ou pertinente.

95% do RD apresenta o texto completo do documento com livre acesso, para aqueles que apresentam o significa que e o documento está sujeito as leis de direitos autorais, solicita-se nesses casos contatar a Biblioteca do IPEN, bibl@ipen.br .

Ao efetuar a busca por um autor o RD apresentará uma relação de todos os trabalhos depositados no RD. No lado direito da tela são apresentados os coautores com o número de trabalhos produzidos em conjunto bem como os assuntos abordados e os respectivos anos de publicação agrupados.

O RD disponibiliza um quadro estatístico de produtividade, onde é possível visualizar o número dos trabalhos agrupados por tipo de coleção, a medida que estão sendo depositados no RD.

Na página inicial nas referências são sinalizados todos os autores IPEN, ao clicar nesse símbolo será aberta uma nova página correspondente à aquele autor – trata-se da página do pesquisador.

Na página do pesquisador, é possível verificar, as variações do nome, a relação de todos os trabalhos com texto completo bem como um quadro resumo numérico; há links para o Currículo Lattes e o Google Acadêmico ( quando esse for informado).

ATENÇÃO!

ESTE TEXTO "AJUDA" ESTÁ SUJEITO A ATUALIZAÇÕES CONSTANTES, A MEDIDA QUE NOVAS FUNCIONALIDADES E RECURSOS DE BUSCA FOREM SENDO DESENVOLVIDOS PELAS EQUIPES DA BIBLIOTECA E DA INFORMÁTICA.

O gerenciamento do Repositório está a cargo da Biblioteca do IPEN. Constam neste RI, até o presente momento 20.950 itens que tanto podem ser artigos de periódicos ou de eventos nacionais e internacionais, dissertações e teses, livros, capítulo de livros e relatórios técnicos. Para participar do RI-IPEN é necessário que pelo menos um dos autores tenha vínculo acadêmico ou funcional com o Instituto. Nesta primeira etapa de funcionamento do RI, a coleta das publicações é realizada periodicamente pela equipe da Biblioteca do IPEN, extraindo os dados das bases internacionais tais como a Web of Science, Scopus, INIS, SciElo além de verificar o Currículo Lattes. O RI-IPEN apresenta também um aspecto inovador no seu funcionamento. Por meio de metadados específicos ele está vinculado ao sistema de gerenciamento das atividades do Plano Diretor anual do IPEN (SIGEPI). Com o objetivo de fornecer dados numéricos para a elaboração dos indicadores da Produção Cientifica Institucional, disponibiliza uma tabela estatística registrando em tempo real a inserção de novos itens. Foi criado um metadado que contém um número único para cada integrante da comunidade científica do IPEN. Esse metadado se transformou em um filtro que ao ser acionado apresenta todos os trabalhos de um determinado autor independente das variáveis na forma de citação do seu nome.

A elaboração do projeto do RI do IPEN foi iniciado em novembro de 2013, colocado em operação interna em julho de 2014 e disponibilizado na Internet em junho de 2015. Utiliza o software livre Dspace, desenvolvido pelo Massachusetts Institute of Technology (MIT). Para descrição dos metadados adota o padrão Dublin Core. É compatível com o Protocolo de Arquivos Abertos (OAI) permitindo interoperabilidade com repositórios de âmbito nacional e internacional.

1. Portaria IPEN-CNEN/SP nº 387, que estabeleceu os princípios que nortearam a criação do RDI, clique aqui.


2. A experiência do Instituto de Pesquisas Energéticas e Nucleares (IPEN-CNEN/SP) na criação de um Repositório Digital Institucional – RDI, clique aqui.

O Repositório Digital do IPEN é um equipamento institucional de acesso aberto, criado com o objetivo de reunir, preservar, disponibilizar e conferir maior visibilidade à Produção Científica publicada pelo Instituto, desde sua criação em 1956.

Operando, inicialmente como uma base de dados referencial o Repositório foi disponibilizado na atual plataforma, em junho de 2015. No Repositório está disponível o acesso ao conteúdo digital de artigos de periódicos, eventos, nacionais e internacionais, livros, capítulos, dissertações, teses e relatórios técnicos.

A elaboração do projeto do RI do IPEN foi iniciado em novembro de 2013, colocado em operação interna em julho de 2014 e disponibilizado na Internet em junho de 2015. Utiliza o software livre Dspace, desenvolvido pelo Massachusetts Institute of Technology (MIT). Para descrição dos metadados adota o padrão Dublin Core. É compatível com o Protocolo de Arquivos Abertos (OAI) permitindo interoperabilidade com repositórios de âmbito nacional e internacional.

O gerenciamento do Repositório está a cargo da Biblioteca do IPEN. Constam neste RI, até o presente momento 20.950 itens que tanto podem ser artigos de periódicos ou de eventos nacionais e internacionais, dissertações e teses, livros, capítulo de livros e relatórios técnicos. Para participar do RI-IPEN é necessário que pelo menos um dos autores tenha vínculo acadêmico ou funcional com o Instituto. Nesta primeira etapa de funcionamento do RI, a coleta das publicações é realizada periodicamente pela equipe da Biblioteca do IPEN, extraindo os dados das bases internacionais tais como a Web of Science, Scopus, INIS, SciElo além de verificar o Currículo Lattes. O RI-IPEN apresenta também um aspecto inovador no seu funcionamento. Por meio de metadados específicos ele está vinculado ao sistema de gerenciamento das atividades do Plano Diretor anual do IPEN (SIGEPI). Com o objetivo de fornecer dados numéricos para a elaboração dos indicadores da Produção Cientifica Institucional, disponibiliza uma tabela estatística registrando em tempo real a inserção de novos itens. Foi criado um metadado que contém um número único para cada integrante da comunidade científica do IPEN. Esse metadado se transformou em um filtro que ao ser acionado apresenta todos os trabalhos de um determinado autor independente das variáveis na forma de citação do seu nome.