JavaScript is disabled for your browser. Some features of this site may not work without it.
Navegação Livros - Capítulos por autor "BROWN, ANDREW D."
-
KOMATSU, LUIZ G.H.
; OLIANI, WASHINGTON L.
; OLIVEIRA, CAMILA B.
; RANGARI, VIJAYA K.; PARRA, DUCLERC F.
.
Application of nanoparticles of ZnO and ZnO-doped-Ag in polymeric blend of HMSPP/SEBS for biocide activity.
In: LI, JIAN (Ed.); ZHANG, MINGMING (Ed.); LI, BOWEN (Ed.); MONTEIRO, SERGIO N. (Ed.); IKHMAYIES, SHADIA (Ed.); KALAY, YUNUS E. (Ed.); HWANG, JIANN-YANG (Ed.); ESCOBEDO-DIAZ, JUAN P. (Ed.); CARPENTER, JOHN S. (Ed.); BROWN, ANDREW D. (Ed.).
Characterization of Minerals, Metals, and Materials.
Cham, CZ, Switzerland: Springer Nature Switzerland AG,
2020.
p. 429-435,
(The Minerals, Metals & Materials Series).
DOI:
10.1007/978-3-030-36628-5_41
Abstract:
In this study, the nanoparticles of Zinc oxide (ZnO) and Zinc oxide doped
with Silver (ZnO/Ag) were synthesized in laboratory. The incorporation of these
nanoparticles in the blend of high melt strength polypropylene (HMSPP) and styrene–
ethylene/butadiene–styrene (SEBS) was carried by melt processing. The obtained
materials were evaluated by X-ray diffraction (XRD), Raman Spectroscopy, Differential
Scanning Calorimetry (DSC), biocidal tests against the bacteria Escherichia
coli and Staphylococcus aureus. The nanoparticles showed size between 150 and
200 nm and spherical form. HMSPP/SEBS/AgNPs/ZnO films incorporated with the
nanoparticles have demonstrated biocidal effect against the bacteria E. coli and S.
aureus when irradiated at 12.5 kGy.
Palavras-Chave:
zinc oxides;
antimicrobial agents;
nanoparticles;
antibiotics
KOMATSU, LUIZ G.H.; OLIANI, WASHINGTON L.; OLIVEIRA, CAMILA B.; RANGARI, VIJAYA K.; PARRA, DUCLERC F.
Application of nanoparticles of ZnO and ZnO-doped-Ag in polymeric blend of HMSPP/SEBS for biocide activity.
In:
LI, JIAN (ed.); ZHANG, MINGMING (ed.); LI, BOWEN (ed.); MONTEIRO, SERGIO N. (ed.); IKHMAYIES, SHADIA (ed.); KALAY, YUNUS E. (ed.); HWANG, JIANN-YANG (ed.); ESCOBEDO-DIAZ, JUAN P. (ed.); CARPENTER, JOHN S. (ed.); BROWN, ANDREW D. (ed.).
Characterization of Minerals, Metals, and Materials.
Cham, CZ, Switzerland: Springer Nature Switzerland AG,
2020.
p. 429-435.
(The Minerals, Metals & Materials Series).
DOI:
10.1007/978-3-030-36628-5_41.
Disponível em: http://repositorio.ipen.br/handle/123456789/31852. Acesso em: $DATA.
Esta referência é gerada automaticamente de acordo com as normas do estilo IPEN/SP (ABNT NBR 6023) e recomenda-se uma verificação final e ajustes caso necessário.
Como referenciar este item
-
COSTA, ROBSON S.
; MOURA, ESPERIDIANA A.B.
.
A bibliometric analysis of the strategy and performance measurement of the polymer matrix nanomaterials development scenario globally, and the participation of Brazil.
In: LI, JIAN (Ed.); ZHANG, MINGMING (Ed.); LI, BOWEN (Ed.); MONTEIRO, SERGIO N. (Ed.); IKHMAYIES, SHADIA (Ed.); KALAY, YUNUS E. (Ed.); HWANG, JIANN-YANG (Ed.); ESCOBEDO-DIAZ, JUAN P. (Ed.); CARPENTER, JOHN S. (Ed.); BROWN, ANDREW D. (Ed.).
Characterization of Minerals, Metals, and Materials.
Cham, CZ, Switzerland: Springer Nature Switzerland AG,
2020.
p. 329-342,
(The Minerals, Metals & Materials Series).
DOI:
10.1007/978-3-030-36628-5_31
Abstract:
Extensive studies have been conducted worldwide on the strategy for the
development of nanomaterials. One of the known strategies for this has aroused
interest in the market is the incorporation of the nanoparticles, extracted from the
residues in thematrices of the polymers for the production of environmentally correct
nanocomposites. This work presents a survey of the scientific knowledge of nanomaterials
of the polymer matrix and a panoramic view of the evolution of these nanomaterials
are subject, in order to meet the criteria of sustainable development due to the
environmental concerns. This study also intends to use bibliometric tools to database
acquisition and analysis of bibliographic reviews for an evaluation of the scenarios
in the world on the development of polymeric nanomaterials based on three different
classes of polymeric nanocomposites: polymer/clay; polymer/graphene, and
polymer/nanocellulose nanocomposites.
Palavras-Chave:
statistical data;
nanomaterials;
nanocomposites;
scientific personnel;
knowledge management;
polymers
COSTA, ROBSON S.; MOURA, ESPERIDIANA A.B.
A bibliometric analysis of the strategy and performance measurement of the polymer matrix nanomaterials development scenario globally, and the participation of Brazil.
In:
LI, JIAN (ed.); ZHANG, MINGMING (ed.); LI, BOWEN (ed.); MONTEIRO, SERGIO N. (ed.); IKHMAYIES, SHADIA (ed.); KALAY, YUNUS E. (ed.); HWANG, JIANN-YANG (ed.); ESCOBEDO-DIAZ, JUAN P. (ed.); CARPENTER, JOHN S. (ed.); BROWN, ANDREW D. (ed.).
Characterization of Minerals, Metals, and Materials.
Cham, CZ, Switzerland: Springer Nature Switzerland AG,
2020.
p. 329-342.
(The Minerals, Metals & Materials Series).
DOI:
10.1007/978-3-030-36628-5_31.
Disponível em: http://repositorio.ipen.br/handle/123456789/31850. Acesso em: $DATA.
Esta referência é gerada automaticamente de acordo com as normas do estilo IPEN/SP (ABNT NBR 6023) e recomenda-se uma verificação final e ajustes caso necessário.
Como referenciar este item
-
MIRANDA, LEILA F. de; BARBOSA, ISABELLA T.F.; MASSON, TEREZINHA J.; MUNHOZ JUNIOR, ANTONIO H.; SILVA, LEONARDO G. de A. e
; GONÇALVES, ALEKSANDRA A.A..
Characterization of hydrogels for release of cosmetic assets containing nanoemulsions of mandellic acid in different concentrations of pseudoboehmite.
In: LI, JIAN (Ed.); ZHANG, MINGMING (Ed.); LI, BOWEN (Ed.); MONTEIRO, SERGIO N. (Ed.); IKHMAYIES, SHADIA (Ed.); KALAY, YUNUS E. (Ed.); HWANG, JIANN-YANG (Ed.); ESCOBEDO-DIAZ, JUAN P. (Ed.); CARPENTER, JOHN S. (Ed.); BROWN, ANDREW D. (Ed.).
Characterization of Minerals, Metals, and Materials.
Cham, CZ, Switzerland: Springer Nature Switzerland AG,
2020.
p. 477-489,
(The Minerals, Metals & Materials Series).
DOI:
10.1007/978-3-030-36628-5_47
Abstract:
Hydrogel is a gel formed by a three-dimensional network of hydrophilic
polymers that are used as advanced asset release systems with good biocompatibility.
The use of ionizing radiation to obtain hydrogels promotes cross-linking with
the concomitant sterilization of the hydrogels. Aiming at the release of the mandelic
acid (an active cosmetic), hydrogels were prepared using different concentration of
poly(N-vinyl-2-pyrrolidone) (PVP), poly(ethylene glycol) (PEG) and agar containing
nanoparticles of the pseudoboehmite, mandelic acid and Palmarosa and Rosa
Mosqueta oils nanoemulsions, submitted to irradiation dose of 25 kGy. Hydrogels
containing 7.5 wt% PVP showed better absorption, slip, odor results, and those with
10 wt% PVP were found to be inadequate. Nanoemulsions were characterized by
acidity, density and optical microscopy; hydrogels samples were put under isothermal
dehydration with air entrainment and dehydration was examined as a function of
time. The results showed that the composition of hydrogels is stable, and the increase
of the concentration of pseudoboehmite in hydrogels sample containing Palmarosa
oil suffers less dehydration and those containing the two oils showed an increase
in dehydration. The hydrogels obtained with 7.5 wt% of PVP and 3 wt% of pseudoboehmite,
Rosa Mosqueta vegetable oil and mandelic acid are most suitable to be
used in cosmetic products.
Palavras-Chave:
hydrogels;
mandelic acid;
pvp;
consumer products
MIRANDA, LEILA F. de; BARBOSA, ISABELLA T.F.; MASSON, TEREZINHA J.; MUNHOZ JUNIOR, ANTONIO H.; SILVA, LEONARDO G. de A. e; GONÇALVES, ALEKSANDRA A.A.
Characterization of hydrogels for release of cosmetic assets containing nanoemulsions of mandellic acid in different concentrations of pseudoboehmite.
In:
LI, JIAN (ed.); ZHANG, MINGMING (ed.); LI, BOWEN (ed.); MONTEIRO, SERGIO N. (ed.); IKHMAYIES, SHADIA (ed.); KALAY, YUNUS E. (ed.); HWANG, JIANN-YANG (ed.); ESCOBEDO-DIAZ, JUAN P. (ed.); CARPENTER, JOHN S. (ed.); BROWN, ANDREW D. (ed.).
Characterization of Minerals, Metals, and Materials.
Cham, CZ, Switzerland: Springer Nature Switzerland AG,
2020.
p. 477-489.
(The Minerals, Metals & Materials Series).
DOI:
10.1007/978-3-030-36628-5_47.
Disponível em: http://repositorio.ipen.br/handle/123456789/31853. Acesso em: $DATA.
Esta referência é gerada automaticamente de acordo com as normas do estilo IPEN/SP (ABNT NBR 6023) e recomenda-se uma verificação final e ajustes caso necessário.
Como referenciar este item
-
SOARES, CARLOS
; SANTANA, JULYANA
; GUVEN, OLGUN; MOURA, ESPERIDIANA A.B.
.
A comparison between graphene oxide and reduced graphene oxide as reinforcement agents in polypropylene nanocomposite using irradiated polypropylene as compatibilizer.
In: LI, JIAN (Ed.); ZHANG, MINGMING (Ed.); LI, BOWEN (Ed.); MONTEIRO, SERGIO N. (Ed.); IKHMAYIES, SHADIA (Ed.); KALAY, YUNUS E. (Ed.); HWANG, JIANN-YANG (Ed.); ESCOBEDO-DIAZ, JUAN P. (Ed.); CARPENTER, JOHN S. (Ed.); BROWN, ANDREW D. (Ed.).
Characterization of Minerals, Metals, and Materials.
Cham, CZ, Switzerland: Springer Nature Switzerland AG,
2020.
p. 385-394,
(The Minerals, Metals & Materials Series).
DOI:
10.1007/978-3-030-36628-5_36
Abstract:
Graphene is thematerial with the bestmechanical resistance ever encountered.
Various types of studies have been carried out on possible applications. The use
as a reinforcement in nanocomposites has shown to be a promising field, but some
studies indicate that the graphene oxide (GO) and reduced graphene oxide (RGO)
have better results as reinforcement, due to the functional groups,which allowa better
adhesion with the matrix. This study analyzes the production of polypropylene (PP)
nanocomposite comparing the use of graphene oxide (GO) and reduced graphene
oxide (RGO) as fillers and irradiated polypropylene as a coupling agent.Atwin-screw
extruder and injection molding machine were used to produce the nanocomposite
PP reinforced with 0.2 wt% of GO and RGO by melt blending. The GO and RGO
were characterized byXRDanalysis.The nanocomposite sampleswere characterized
by XRD, SEM, TG, DSC and mechanical test.
Palavras-Chave:
graphene;
oxides;
polypropylene;
nanocomposites;
gamma radiation;
stresses;
tensile properties
SOARES, CARLOS; SANTANA, JULYANA; GUVEN, OLGUN; MOURA, ESPERIDIANA A.B.
A comparison between graphene oxide and reduced graphene oxide as reinforcement agents in polypropylene nanocomposite using irradiated polypropylene as compatibilizer.
In:
LI, JIAN (ed.); ZHANG, MINGMING (ed.); LI, BOWEN (ed.); MONTEIRO, SERGIO N. (ed.); IKHMAYIES, SHADIA (ed.); KALAY, YUNUS E. (ed.); HWANG, JIANN-YANG (ed.); ESCOBEDO-DIAZ, JUAN P. (ed.); CARPENTER, JOHN S. (ed.); BROWN, ANDREW D. (ed.).
Characterization of Minerals, Metals, and Materials.
Cham, CZ, Switzerland: Springer Nature Switzerland AG,
2020.
p. 385-394.
(The Minerals, Metals & Materials Series).
DOI:
10.1007/978-3-030-36628-5_36.
Disponível em: http://repositorio.ipen.br/handle/123456789/31851. Acesso em: $DATA.
Esta referência é gerada automaticamente de acordo com as normas do estilo IPEN/SP (ABNT NBR 6023) e recomenda-se uma verificação final e ajustes caso necessário.
Como referenciar este item
-
TATEI, TATIANE Y.
; FONTES, ERIC H.
; MOREIRA, RENAN P.
; DIAS, FRANCISCO V.; OLIVEIRA, RENE R.
; RANGARI, VIJAYA; MOURA, ESPERIDIANA A.B.
.
Improvement properties of polypropylene by graphene oxide incorporation.
In: LI, JIAN (Ed.); ZHANG, MINGMING (Ed.); LI, BOWEN (Ed.); MONTEIRO, SERGIO N. (Ed.); IKHMAYIES, SHADIA (Ed.); KALAY, YUNUS E. (Ed.); HWANG, JIANN-YANG (Ed.); ESCOBEDO-DIAZ, JUAN P. (Ed.); CARPENTER, JOHN S. (Ed.); BROWN, ANDREW D. (Ed.).
Characterization of Minerals, Metals, and Materials.
Cham, CZ, Switzerland: Springer Nature Switzerland AG,
2020.
p. 581-589,
(The Minerals, Metals & Materials Series).
DOI:
10.1007/978-3-030-36628-5_57
Abstract:
Due to the remarkable properties of graphene oxide (GO) and its possibility
of functionalization,GOhas been used in many applications such as nanocomposites.
GO nanosheets have been shown to improve the properties of the polypropylene
(PP) matrix, for instance, its strength, gas barrier, thermal, and electrical conductivity.
As PP has relatively low cost and varied applications, this work aims to study the
changes in its thermal, morphological, and mechanical properties, due to the incorporation
of GO in the PP matrix. GO was synthesized from graphite by a modified
Hummers method. The nanocomposites PP/GO with 0.1, 0.2, and 0.3 wt% of GO in
the PP matrix were obtained using a twin-screw extruder and an injection molding
machine via a melt blending process. The nanocomposites PP/GO were characterized
by FE-SEM and Izod impact test. In addition, the GO nanosheets were also
characterized by Raman spectroscopy, ATR-FTIR, FE-SEM, and XRD, therewith
correlation between properties was discussed.
Palavras-Chave:
graphene;
oxides;
polypropylene;
nanocomposites
TATEI, TATIANE Y.; FONTES, ERIC H.; MOREIRA, RENAN P.; DIAS, FRANCISCO V.; OLIVEIRA, RENE R.; RANGARI, VIJAYA; MOURA, ESPERIDIANA A.B.
Improvement properties of polypropylene by graphene oxide incorporation.
In:
LI, JIAN (ed.); ZHANG, MINGMING (ed.); LI, BOWEN (ed.); MONTEIRO, SERGIO N. (ed.); IKHMAYIES, SHADIA (ed.); KALAY, YUNUS E. (ed.); HWANG, JIANN-YANG (ed.); ESCOBEDO-DIAZ, JUAN P. (ed.); CARPENTER, JOHN S. (ed.); BROWN, ANDREW D. (ed.).
Characterization of Minerals, Metals, and Materials.
Cham, CZ, Switzerland: Springer Nature Switzerland AG,
2020.
p. 581-589.
(The Minerals, Metals & Materials Series).
DOI:
10.1007/978-3-030-36628-5_57.
Disponível em: http://repositorio.ipen.br/handle/123456789/31854. Acesso em: $DATA.
Esta referência é gerada automaticamente de acordo com as normas do estilo IPEN/SP (ABNT NBR 6023) e recomenda-se uma verificação final e ajustes caso necessário.
Como referenciar este item
-
SANTOS, BIANCA S.
; INACIO, ANDRE L.N.
; BARTOLOMEI, SUELLEN S.
; SILVA, TAISE B.S.
; CARMO, KARINA L.S.
; OLIVEIRA, RENE R.
; MOURA, ESPERIDIANA A.B.
.
Influence of the reduced graphene oxide incorporation on properties of acrylonitrile butadiene styrene (ABS).
In: LI, JIAN (Ed.); ZHANG, MINGMING (Ed.); LI, BOWEN (Ed.); MONTEIRO, SERGIO N. (Ed.); IKHMAYIES, SHADIA (Ed.); KALAY, YUNUS E. (Ed.); HWANG, JIANN-YANG (Ed.); ESCOBEDO-DIAZ, JUAN P. (Ed.); CARPENTER, JOHN S. (Ed.); BROWN, ANDREW D. (Ed.).
Characterization of Minerals, Metals, and Materials.
Cham, CZ, Switzerland: Springer Nature Switzerland AG,
2020.
p. 599-607,
(The Minerals, Metals & Materials Series).
DOI:
10.1007/978-3-030-36628-5_59
Abstract:
The purpose of this study was to evaluate the influence of incorporation of
the reduced graphene oxide on properties of acrylonitrile butadiene styrene (ABS).
The incorporation of 0.5 and 1.5 wt% of RGO into ABS matrix was carried out
by melting extrusion process using a twin-screw extruder and injection molding
machine. The properties of ABS/RGO nanocomposite samples were investigated
by tensile and impact Izod tests, FE-SEM, and XRD analysis. The results showed
that the incorporation of small amount of RGO into ABS matrix led to obtaining of
polymeric nanocomposite with superior mechanical properties when compared with
original properties of ABS matrix.
Palavras-Chave:
graphene;
oxides;
acrylonitrile;
butadiene;
styrene;
mechanical tests
SANTOS, BIANCA S.; INACIO, ANDRE L.N.; BARTOLOMEI, SUELLEN S.; SILVA, TAISE B.S.; CARMO, KARINA L.S.; OLIVEIRA, RENE R.; MOURA, ESPERIDIANA A.B.
Influence of the reduced graphene oxide incorporation on properties of acrylonitrile butadiene styrene (ABS).
In:
LI, JIAN (ed.); ZHANG, MINGMING (ed.); LI, BOWEN (ed.); MONTEIRO, SERGIO N. (ed.); IKHMAYIES, SHADIA (ed.); KALAY, YUNUS E. (ed.); HWANG, JIANN-YANG (ed.); ESCOBEDO-DIAZ, JUAN P. (ed.); CARPENTER, JOHN S. (ed.); BROWN, ANDREW D. (ed.).
Characterization of Minerals, Metals, and Materials.
Cham, CZ, Switzerland: Springer Nature Switzerland AG,
2020.
p. 599-607.
(The Minerals, Metals & Materials Series).
DOI:
10.1007/978-3-030-36628-5_59.
Disponível em: http://repositorio.ipen.br/handle/123456789/31855. Acesso em: $DATA.
Esta referência é gerada automaticamente de acordo com as normas do estilo IPEN/SP (ABNT NBR 6023) e recomenda-se uma verificação final e ajustes caso necessário.
Como referenciar este item
-
BARTOLOMEI, S.S.; MOURA, E.A.B.
; WIEBECK, H..
Inhibition of flame propagation in nanocomposites with expanded polystyrene recycled clay, gypsum, and titanium dioxide.
In: LI, JIAN (Ed.); ZHANG, MINGMING (Ed.); LI, BOWEN (Ed.); MONTEIRO, SERGIO N. (Ed.); IKHMAYIES, SHADIA (Ed.); KALAY, YUNUS E. (Ed.); HWANG, JIANN-YANG (Ed.); ESCOBEDO-DIAZ, JUAN P. (Ed.); CARPENTER, JOHN S. (Ed.); BROWN, ANDREW D. (Ed.).
Characterization of Minerals, Metals, and Materials.
Cham, CZ, Switzerland: Springer Nature Switzerland AG,
2020.
p. 609-618,
(The Minerals, Metals & Materials Series).
DOI:
10.1007/978-3-030-36628-5_60
Abstract:
The large amount of plastic waste found in the environment, landfills, and
dumps boost research into the recycling of polymer materials, which could reduce
the amount of polymer discarded. In Brazil, the sector that most consumes polymers
is the civil construction that could consume recycled polymerswithout concerns with
the properties due to applications of low mechanical exigency. However, for applications
in this sector, it is necessary that the materials have some resistance to the
propagation of flames. This work discusses the flame retardance in nanocomposites
with recycled polystyrene matrix and particles of nanoargila, titanium dioxide, and
gypsum. The results of the X-ray diffraction (XRD), differential scanning calorimeter
(DSC), field emission scanning electronmicroscopy (FE-SEM), and flammability
test. The results showed that glycerol, added during recycling, can plasticize recycled
expanded polystyrene while maintaining the flame resistance properties of the
material with flame retardant. It can also be concluded that some particles may delay
the propagation of the flame in the composite.
Palavras-Chave:
clays;
titanium oxides;
gypsum;
polystyrene;
flames
BARTOLOMEI, S.S.; MOURA, E.A.B.; WIEBECK, H.
Inhibition of flame propagation in nanocomposites with expanded polystyrene recycled clay, gypsum, and titanium dioxide.
In:
LI, JIAN (ed.); ZHANG, MINGMING (ed.); LI, BOWEN (ed.); MONTEIRO, SERGIO N. (ed.); IKHMAYIES, SHADIA (ed.); KALAY, YUNUS E. (ed.); HWANG, JIANN-YANG (ed.); ESCOBEDO-DIAZ, JUAN P. (ed.); CARPENTER, JOHN S. (ed.); BROWN, ANDREW D. (ed.).
Characterization of Minerals, Metals, and Materials.
Cham, CZ, Switzerland: Springer Nature Switzerland AG,
2020.
p. 609-618.
(The Minerals, Metals & Materials Series).
DOI:
10.1007/978-3-030-36628-5_60.
Disponível em: http://repositorio.ipen.br/handle/123456789/31856. Acesso em: $DATA.
Esta referência é gerada automaticamente de acordo com as normas do estilo IPEN/SP (ABNT NBR 6023) e recomenda-se uma verificação final e ajustes caso necessário.
Como referenciar este item
-
BARTOLOMEI, MARCIO R.X.
; CARMO, KARINA H.S.
; SANTOS, BIANCA S.
; BARTOLOMEI, SUELLEN S.
; OLIVEIRA, RENE R.
; MOURA, ESPERIDIANA A.B.
.
Investigation on mechanical and thermal behaviours of PBAT/PLA blend reinforced with reduced graphene oxide nanosheets.
In: LI, JIAN (Ed.); ZHANG, MINGMING (Ed.); LI, BOWEN (Ed.); MONTEIRO, SERGIO N. (Ed.); IKHMAYIES, SHADIA (Ed.); KALAY, YUNUS E. (Ed.); HWANG, JIANN-YANG (Ed.); ESCOBEDO-DIAZ, JUAN P. (Ed.); CARPENTER, JOHN S. (Ed.); BROWN, ANDREW D. (Ed.).
Characterization of Minerals, Metals, and Materials.
Cham, CZ, Switzerland: Springer Nature Switzerland AG,
2020.
p. 631-639,
(The Minerals, Metals & Materials Series).
DOI:
10.1007/978-3-030-36628-5_62
Abstract:
The aim of this study was to process and investigate the changes in
the mechanical and morphological properties of the biodegradable nanocomposites
based on polybutylene adipate-co-terephthalate (PBAT)/poly(lactic acid) (PLA)
blend (PBAT/PLA blend) due to the incorporation of reduced graphene oxide (RGO)
nanosheets. The biodegradable polymeric nanocomposites were prepared by melting
extrusion process using a twin-screw extruder machine. The influence of the RGO
nanosheets incorporation on mechanical and thermal properties of PBAT/PLA blend
was investigated by tensile Thermogravimetric (TG), X-Ray diffraction (XRD), differential
scanning calorimetry (DSC), and tensile test analysis. Results showed that
incorporation of the small amount ofRGO(0.1wt.%) ofRGOnanosheets in the blend
matrix of PBAT/PLA resulted in an important gain of mechanical properties of the
blend. This result indicates that a very small amount of RGO nanosheets addition in
the PBAT/PLA can lead to obtaining materials with superior properties suitable for
several industrial applications.
Palavras-Chave:
polymers;
graphene;
oxides;
biodegradation;
mechanical tests
BARTOLOMEI, MARCIO R.X.; CARMO, KARINA H.S.; SANTOS, BIANCA S.; BARTOLOMEI, SUELLEN S.; OLIVEIRA, RENE R.; MOURA, ESPERIDIANA A.B.
Investigation on mechanical and thermal behaviours of PBAT/PLA blend reinforced with reduced graphene oxide nanosheets.
In:
LI, JIAN (ed.); ZHANG, MINGMING (ed.); LI, BOWEN (ed.); MONTEIRO, SERGIO N. (ed.); IKHMAYIES, SHADIA (ed.); KALAY, YUNUS E. (ed.); HWANG, JIANN-YANG (ed.); ESCOBEDO-DIAZ, JUAN P. (ed.); CARPENTER, JOHN S. (ed.); BROWN, ANDREW D. (ed.).
Characterization of Minerals, Metals, and Materials.
Cham, CZ, Switzerland: Springer Nature Switzerland AG,
2020.
p. 631-639.
(The Minerals, Metals & Materials Series).
DOI:
10.1007/978-3-030-36628-5_62.
Disponível em: http://repositorio.ipen.br/handle/123456789/31857. Acesso em: $DATA.
Esta referência é gerada automaticamente de acordo com as normas do estilo IPEN/SP (ABNT NBR 6023) e recomenda-se uma verificação final e ajustes caso necessário.
Como referenciar este item
-
TAMURA, CAROLINE S.
; ARANTES, MARIANA
; CARMO, KARINA H.S.
; SANTOS, BIANCA S.
; OLIVEIRA, RENE R.
; MOURA, ESPERIDIANA A.B.
.
Mechanical and morphological properties of hybrid composites based on recycled LDPE/EVA blend reinforced with clay and babassu fiber residues.
In: LI, JIAN (Ed.); ZHANG, MINGMING (Ed.); LI, BOWEN (Ed.); MONTEIRO, SERGIO N. (Ed.); IKHMAYIES, SHADIA (Ed.); KALAY, YUNUS E. (Ed.); HWANG, JIANN-YANG (Ed.); ESCOBEDO-DIAZ, JUAN P. (Ed.); CARPENTER, JOHN S. (Ed.); BROWN, ANDREW D. (Ed.).
Characterization of Minerals, Metals, and Materials.
Cham, CZ, Switzerland: Springer Nature Switzerland AG,
2020.
p. 661-669,
(The Minerals, Metals & Materials Series).
DOI:
10.1007/978-3-030-36628-5_65
Abstract:
Over the years the consumption of plastic products made of conventional
polymers has produced a large amount of waste which has led to disposal problems
worldwide. Among the alternatives to minimize these problems are reuse and recycling
practices. Then, the recycling of plastic and the use of recycled materials to
produce new materials reinforced with nanoparticles from natural resources can be
an alternative to reduce inappropriate waste disposal. The objective of this study is to
investigate the effects of the addition of clay and non-treated babassu fiber residues
on the mechanical and morphological properties of composite based on recycled
LDPE/EVA blend. Composite materials containing 1–3 wt% of babassu residues
and 1 wt% of clay were prepared using a twin-screw extruder machine and flat die
single extrusion process, in order to prepare hybrid composites sheets. The sheets
prepared by recycled LDPE/EVA blend and its composites were characterized by
tensile tests, XRD, and FE-SEM analysis and the correlation between properties was
discussed.
Palavras-Chave:
mixers;
recycling;
polymers;
films;
fibers;
composite materials;
hybridization
TAMURA, CAROLINE S.; ARANTES, MARIANA; CARMO, KARINA H.S.; SANTOS, BIANCA S.; OLIVEIRA, RENE R.; MOURA, ESPERIDIANA A.B.
Mechanical and morphological properties of hybrid composites based on recycled LDPE/EVA blend reinforced with clay and babassu fiber residues.
In:
LI, JIAN (ed.); ZHANG, MINGMING (ed.); LI, BOWEN (ed.); MONTEIRO, SERGIO N. (ed.); IKHMAYIES, SHADIA (ed.); KALAY, YUNUS E. (ed.); HWANG, JIANN-YANG (ed.); ESCOBEDO-DIAZ, JUAN P. (ed.); CARPENTER, JOHN S. (ed.); BROWN, ANDREW D. (ed.).
Characterization of Minerals, Metals, and Materials.
Cham, CZ, Switzerland: Springer Nature Switzerland AG,
2020.
p. 661-669.
(The Minerals, Metals & Materials Series).
DOI:
10.1007/978-3-030-36628-5_65.
Disponível em: http://repositorio.ipen.br/handle/123456789/31858. Acesso em: $DATA.
Esta referência é gerada automaticamente de acordo com as normas do estilo IPEN/SP (ABNT NBR 6023) e recomenda-se uma verificação final e ajustes caso necessário.
Como referenciar este item
-
OLIANI, WASHINGTON L.
; KOMATSU, LUIZ G.H.
; LUGAO, ADEMAR B.
; RANGARI, VIJAYA K.; PARRA, DUCLERC F.
.
Processing and characterization of polyethylene-AgNPs films: biocide effect.
In: LI, JIAN (Ed.); ZHANG, MINGMING (Ed.); LI, BOWEN (Ed.); MONTEIRO, SERGIO N. (Ed.); IKHMAYIES, SHADIA (Ed.); KALAY, YUNUS E. (Ed.); HWANG, JIANN-YANG (Ed.); ESCOBEDO-DIAZ, JUAN P. (Ed.); CARPENTER, JOHN S. (Ed.); BROWN, ANDREW D. (Ed.).
Characterization of Minerals, Metals, and Materials.
Cham, CZ, Switzerland: Springer Nature Switzerland AG,
2020.
p. 679-688,
(The Minerals, Metals & Materials Series).
DOI:
10.1007/978-3-030-36628-5_67
Abstract:
Low-density-polyethylene (LDPE) and Linear-low-density-polyethylene
(LLDPE) nanocomposites films containing silver nitrate (AgNO3) and surfactant
oleic acid (AO) were manufactured via extrusion and subsequently characterised.
The films were evaluated by scanning electronmicroscopy (SEM), energy dispersive
spectroscopy (EDX), differential scanning calorimetry (DSC), transmission electron
microscopy (TEM), and infrared spectroscopy (FTIR). Further, the antibacterial
properties of the films were investigated against Escherichia coli (Gram-negative)
and Staphylococcus aureus (Gram-positive) bacteria.The results indicated that LDPE
nanocomposite films containing AgNPs have the potential to be used in antimicrobial
packaging for food applications.
Palavras-Chave:
nanocomposites;
polyethylenes;
silver nitrates;
oleic acid;
germicides
OLIANI, WASHINGTON L.; KOMATSU, LUIZ G.H.; LUGAO, ADEMAR B.; RANGARI, VIJAYA K.; PARRA, DUCLERC F.
Processing and characterization of polyethylene-AgNPs films: biocide effect.
In:
LI, JIAN (ed.); ZHANG, MINGMING (ed.); LI, BOWEN (ed.); MONTEIRO, SERGIO N. (ed.); IKHMAYIES, SHADIA (ed.); KALAY, YUNUS E. (ed.); HWANG, JIANN-YANG (ed.); ESCOBEDO-DIAZ, JUAN P. (ed.); CARPENTER, JOHN S. (ed.); BROWN, ANDREW D. (ed.).
Characterization of Minerals, Metals, and Materials.
Cham, CZ, Switzerland: Springer Nature Switzerland AG,
2020.
p. 679-688.
(The Minerals, Metals & Materials Series).
DOI:
10.1007/978-3-030-36628-5_67.
Disponível em: http://repositorio.ipen.br/handle/123456789/31859. Acesso em: $DATA.
Esta referência é gerada automaticamente de acordo com as normas do estilo IPEN/SP (ABNT NBR 6023) e recomenda-se uma verificação final e ajustes caso necessário.
Como referenciar este item
-
COSTA, ROBSON S.
; ARAUJO, DANIELLE G.
; ANDRADE, MARCIO S. de
; OLIVEIRA, RENE R.
; RANGARI, VIJAYA; MOURA, ESPERIDIANA A.B.
; DIAS, FRANCISCO V..
Production and characterization of PBAT reinforced with clay and graphene oxide nanosheets: a comparative study.
In: LI, JIAN (Ed.); ZHANG, MINGMING (Ed.); LI, BOWEN (Ed.); MONTEIRO, SERGIO N. (Ed.); IKHMAYIES, SHADIA (Ed.); KALAY, YUNUS E. (Ed.); HWANG, JIANN-YANG (Ed.); ESCOBEDO-DIAZ, JUAN P. (Ed.); CARPENTER, JOHN S. (Ed.); BROWN, ANDREW D. (Ed.).
Characterization of Minerals, Metals, and Materials.
Cham, CZ, Switzerland: Springer Nature Switzerland AG,
2020.
p. 689-699,
(The Minerals, Metals & Materials Series).
DOI:
10.1007/978-3-030-36628-5_68
Abstract:
The poly (butylene adipate-co-terephthalate) (PBAT), a biodegradable
polymer, is among the most promising materials to be considered as environmentally
friendly high performance biodegradable plastics. However, the mechanical
properties of PBAT are not the best for several applications. According to the literature,
the properties of the biodegradable polymer can be improved by addition
of a small amount of nanofillers, such as clay, silica, and graphene. The objective
of this study is to compare the effect of the addition of Cloisite clay and graphene
oxide (GO) on the properties of flexible films based on PBAT matrix. The composite
films based on PBAT with addition of Cloisite (2.0 wt%) and PBAT composite films
with addition of Cloisite and GO (0.1–0.2 wt%) were prepared by extrusion, using
a twin-screw extruder and a flat die single extruder. The effects of the addition of
Cloisite clay and graphene oxide on mechanical and thermal properties of films were
evaluated by mechanical and water absorption tests, FE-SEM, XRD, and Raman
analysis.
Palavras-Chave:
graphene;
oxide minerals;
nanocomposites;
polymers;
butenes;
biodegradation;
mechanical properties;
flexibility
COSTA, ROBSON S.; ARAUJO, DANIELLE G.; ANDRADE, MARCIO S. de; OLIVEIRA, RENE R.; RANGARI, VIJAYA; MOURA, ESPERIDIANA A.B.; DIAS, FRANCISCO V.
Production and characterization of PBAT reinforced with clay and graphene oxide nanosheets: a comparative study.
In:
LI, JIAN (ed.); ZHANG, MINGMING (ed.); LI, BOWEN (ed.); MONTEIRO, SERGIO N. (ed.); IKHMAYIES, SHADIA (ed.); KALAY, YUNUS E. (ed.); HWANG, JIANN-YANG (ed.); ESCOBEDO-DIAZ, JUAN P. (ed.); CARPENTER, JOHN S. (ed.); BROWN, ANDREW D. (ed.).
Characterization of Minerals, Metals, and Materials.
Cham, CZ, Switzerland: Springer Nature Switzerland AG,
2020.
p. 689-699.
(The Minerals, Metals & Materials Series).
DOI:
10.1007/978-3-030-36628-5_68.
Disponível em: http://repositorio.ipen.br/handle/123456789/31860. Acesso em: $DATA.
Esta referência é gerada automaticamente de acordo com as normas do estilo IPEN/SP (ABNT NBR 6023) e recomenda-se uma verificação final e ajustes caso necessário.
Como referenciar este item
-
SARTORI, M.N.
; CASTRO, D.P.
; VALENZUELA-DIAZ, F.R.; SILVA, L.G.A.
.
The incorporation of the Light Green clay in the textile polyamide residues.
In: LI, JIAN (Ed.); ZHANG, MINGMING (Ed.); LI, BOWEN (Ed.); MONTEIRO, SERGIO N. (Ed.); IKHMAYIES, SHADIA (Ed.); KALAY, YUNUS E. (Ed.); HWANG, JIANN-YANG (Ed.); ESCOBEDO-DIAZ, JUAN P. (Ed.); CARPENTER, JOHN S. (Ed.); BROWN, ANDREW D. (Ed.); SOMAN, RAJIV (Ed.); MOSER, ALEX (Ed.).
Characterization of Minerals, Metals, and Materials.
Cham, Switzerland: Springer Nature Switzerland AG,
2021.
p. 587-593,
(The Minerals, Metals & Materials Series).
DOI:
10.1007/978-3-030-65493-1_60
Abstract:
The aim of this work is to evaluate the possibility to use textile residues
of polyamide with elastane that are discarded by the industry as a matrix of a new
polymer-clay composite material, evaluated on a manometric scale, and to propose
a way of recycling for these materials. At the same time, with nanocomposite technology,
value is added to this material. In this work, polyamide of textile residues
from industrywas used. These materials were first processed in a compacter machine.
Composites at 1, 2, and 3% by weight of Light Green clay/polyamide were prepared
by double screw extrusion. The properties of the composite were characterized by
X-ray diffraction (XRD), tensile, flexural, impact tests, and thermogravimetric analysis
(TGA). Results obtained were compared with the neat textile polyamide properties.
It was concluded that it is feasible to recycle the textile residues of polyamide,
and that the addition of clay, at the doses studied in this work, could lead to the
obtaining of composite materials with better mechanical than untreated ones.
SARTORI, M.N.; CASTRO, D.P.; VALENZUELA-DIAZ, F.R.; SILVA, L.G.A.
The incorporation of the Light Green clay in the textile polyamide residues.
In:
LI, JIAN (ed.); ZHANG, MINGMING (ed.); LI, BOWEN (ed.); MONTEIRO, SERGIO N. (ed.); IKHMAYIES, SHADIA (ed.); KALAY, YUNUS E. (ed.); HWANG, JIANN-YANG (ed.); ESCOBEDO-DIAZ, JUAN P. (ed.); CARPENTER, JOHN S. (ed.); BROWN, ANDREW D. (ed.); SOMAN, RAJIV (ed.); MOSER, ALEX (ed.).
Characterization of Minerals, Metals, and Materials.
Cham, Switzerland: Springer Nature Switzerland AG,
2021.
p. 587-593.
(The Minerals, Metals & Materials Series).
DOI:
10.1007/978-3-030-65493-1_60.
Disponível em: http://repositorio.ipen.br/handle/123456789/32948. Acesso em: $DATA.
Esta referência é gerada automaticamente de acordo com as normas do estilo IPEN/SP (ABNT NBR 6023) e recomenda-se uma verificação final e ajustes caso necessário.
Como referenciar este item
Buscar no repositório
Navegar
-
Todo o repositório
-
Esta coleção
Minha conta
Visualizar
A pesquisa no RD utiliza os recursos de busca da maioria das bases de dados. No entanto algumas dicas podem auxiliar para obter um resultado mais pertinente.
✔ É possível efetuar a busca de um autor ou um termo em todo o RD, por meio do
Buscar no Repositório
, isto é, o termo solicitado será localizado em qualquer campo do RD. No entanto esse tipo de pesquisa não é recomendada a não ser que se deseje um resultado amplo e generalizado.
✔ A pesquisa apresentará melhor resultado selecionando um dos filtros disponíveis em
Navegar
✔ Os filtros disponíveis em
Navegar
tais como: Coleções, Ano de publicação, Títulos, Assuntos, Autores, Revista, Tipo de publicação são autoexplicativos. O filtro,
Autores IPEN
apresenta uma relação com os autores vinculados ao IPEN; o
ID Autor IPEN
diz respeito ao número único de identificação de cada autor constante no RD e sob o qual estão agrupados todos os seus trabalhos independente das variáveis do seu nome;
Tipo de acesso
diz respeito à acessibilidade do documento, isto é , sujeito as leis de direitos autorais, ID RT apresenta a relação dos relatórios técnicos, restritos para consulta das comunidades indicadas.
A opção
Busca avançada
utiliza os conectores da lógica boleana, é o melhor recurso para combinar chaves de busca e obter documentos relevantes à sua pesquisa, utilize os filtros apresentados na caixa de seleção para refinar o resultado de busca. Pode-se adicionar vários filtros a uma mesma busca.
Exemplo:
Buscar os artigos apresentados em um evento internacional de 2015, sobre loss of coolant, do autor Maprelian.
Autor: Maprelian
Título: loss of coolant
Tipo de publicação: Texto completo de evento
Ano de publicação: 2015
✔ Para indexação dos documentos é utilizado o Thesaurus do INIS, especializado na área nuclear e utilizado em todos os países membros da
International Atomic Energy Agency – IAEA
, por esse motivo, utilize os termos de busca de assunto em inglês; isto não exclui a busca livre por palavras, apenas o resultado pode não ser tão relevante ou pertinente.
✔ 95% do RD apresenta o texto completo do documento com livre acesso, para aqueles que apresentam o significa que e o documento está sujeito as leis de direitos autorais, solicita-se nesses casos contatar a Biblioteca do IPEN,
bibl@ipen.br
.
✔ Ao efetuar a busca por um autor o RD apresentará uma relação de todos os trabalhos depositados no RD. No lado direito da tela são apresentados os coautores com o número de trabalhos produzidos em conjunto bem como os assuntos abordados e os respectivos anos de publicação agrupados.
✔ O RD disponibiliza um quadro estatístico de produtividade, onde é possível visualizar o número dos trabalhos agrupados por tipo de coleção, a medida que estão sendo depositados no RD.
✔ Na página inicial nas referências são sinalizados todos os autores IPEN, ao clicar nesse símbolo será aberta uma nova página correspondente à aquele autor – trata-se da página do pesquisador.
✔ Na página do pesquisador, é possível verificar, as variações do nome, a relação de todos os trabalhos com texto completo bem como um quadro resumo numérico; há links para o Currículo Lattes e o Google Acadêmico ( quando esse for informado).
ATENÇÃO!
ESTE TEXTO "AJUDA" ESTÁ SUJEITO A ATUALIZAÇÕES CONSTANTES, A MEDIDA QUE NOVAS FUNCIONALIDADES E RECURSOS DE BUSCA FOREM SENDO DESENVOLVIDOS PELAS EQUIPES DA BIBLIOTECA E DA INFORMÁTICA.
O gerenciamento do Repositório está a cargo da Biblioteca do IPEN. Constam neste RI, até o presente momento 20.950 itens que tanto podem ser artigos de periódicos ou de eventos nacionais e internacionais, dissertações e teses, livros, capítulo de livros e relatórios técnicos. Para participar do RI-IPEN é necessário que pelo menos um dos autores tenha vínculo acadêmico ou funcional com o Instituto. Nesta primeira etapa de funcionamento do RI, a coleta das publicações é realizada periodicamente pela equipe da Biblioteca do IPEN, extraindo os dados das bases internacionais tais como a Web of Science, Scopus, INIS, SciElo além de verificar o Currículo Lattes. O RI-IPEN apresenta também um aspecto inovador no seu funcionamento. Por meio de metadados específicos ele está vinculado ao sistema de gerenciamento das atividades do Plano Diretor anual do IPEN (SIGEPI). Com o objetivo de fornecer dados numéricos para a elaboração dos indicadores da Produção Cientifica Institucional, disponibiliza uma tabela estatística registrando em tempo real a inserção de novos itens. Foi criado um metadado que contém um número único para cada integrante da comunidade científica do IPEN. Esse metadado se transformou em um filtro que ao ser acionado apresenta todos os trabalhos de um determinado autor independente das variáveis na forma de citação do seu nome.
A elaboração do projeto do RI do IPEN foi iniciado em novembro de 2013, colocado em operação interna em julho de 2014 e disponibilizado na Internet em junho de 2015. Utiliza o software livre Dspace, desenvolvido pelo Massachusetts Institute of Technology (MIT). Para descrição dos metadados adota o padrão Dublin Core. É compatível com o Protocolo de Arquivos Abertos (OAI) permitindo interoperabilidade com repositórios de âmbito nacional e internacional.
1. Portaria IPEN-CNEN/SP nº 387, que estabeleceu os princípios que nortearam a criação do RDI,
clique aqui.
2. A experiência do Instituto de Pesquisas Energéticas e Nucleares (IPEN-CNEN/SP) na criação de um Repositório Digital Institucional – RDI,
clique aqui.
O Repositório Digital do IPEN é um equipamento institucional de acesso aberto, criado com o objetivo de reunir, preservar, disponibilizar e conferir maior visibilidade à Produção Científica publicada pelo Instituto, desde sua criação em 1956.
Operando, inicialmente como uma base de dados referencial o Repositório foi disponibilizado na atual plataforma, em junho de 2015. No Repositório está disponível o acesso ao conteúdo digital de artigos de periódicos, eventos, nacionais e internacionais, livros, capítulos, dissertações, teses e relatórios técnicos.
A elaboração do projeto do RI do IPEN foi iniciado em novembro de 2013, colocado em operação interna em julho de 2014 e disponibilizado na Internet em junho de 2015. Utiliza o software livre Dspace, desenvolvido pelo Massachusetts Institute of Technology (MIT). Para descrição dos metadados adota o padrão Dublin Core. É compatível com o Protocolo de Arquivos Abertos (OAI) permitindo interoperabilidade com repositórios de âmbito nacional e internacional.
O gerenciamento do Repositório está a cargo da Biblioteca do IPEN. Constam neste RI, até o presente momento 20.950 itens que tanto podem ser artigos de periódicos ou de eventos nacionais e internacionais, dissertações e teses, livros, capítulo de livros e relatórios técnicos. Para participar do RI-IPEN é necessário que pelo menos um dos autores tenha vínculo acadêmico ou funcional com o Instituto. Nesta primeira etapa de funcionamento do RI, a coleta das publicações é realizada periodicamente pela equipe da Biblioteca do IPEN, extraindo os dados das bases internacionais tais como a Web of Science, Scopus, INIS, SciElo além de verificar o Currículo Lattes. O RI-IPEN apresenta também um aspecto inovador no seu funcionamento. Por meio de metadados específicos ele está vinculado ao sistema de gerenciamento das atividades do Plano Diretor anual do IPEN (SIGEPI). Com o objetivo de fornecer dados numéricos para a elaboração dos indicadores da Produção Cientifica Institucional, disponibiliza uma tabela estatística registrando em tempo real a inserção de novos itens. Foi criado um metadado que contém um número único para cada integrante da comunidade científica do IPEN. Esse metadado se transformou em um filtro que ao ser acionado apresenta todos os trabalhos de um determinado autor independente das variáveis na forma de citação do seu nome.