JavaScript is disabled for your browser. Some features of this site may not work without it.
Navegação Livros - Capítulos por autor "KALAY, YUNUS E."
-
MUNHOZ JUNIOR, ANTONIO H.; GALHARDO, GUSTAVO F.; ORTEGA, FERNANDO dos S.; LIMA, NELSON B. de
; MORAES, DENISON A.; MIRANDA, LEILA F. de; VALENZUELA-DIAZ, FRANCISCO R..
Alpha-alumina synthesis using gamma-alumina powders.
In: LI, BOWEN (Ed.); LI, JIAN (Ed.); IKHMAYIES, SHADIA (Ed.); ZHANG, MINGMING (Ed.); KALAY, YUNUS E. (Ed.); CARPENTER, JOHN S. (Ed.); HWANG, JIANN-YANG (Ed.); MONTEIRO, SERGIO N. (Ed.); BAI, CHENGUANG (Ed.); ESCOBEDO-DIAZ, JUAN P. (Ed.); SPENA, PASQUALE R. (Ed.); GOSWAMI, RAMASIS (Ed.).
Characterization of Minerals, Metals, and Materials.
Cham, CZ, Switzerland: Springer Nature Switzerland AG,
2019.
p. 441-451,
(The Minerals, Metals & Materials Series).
DOI:
10.1007/978-3-030-05749-7_44
Abstract:
Alpha-alumina is a ceramic material with applications as a biomaterial in
femoral prostheses and teeth. The study of the influence of the precursor powder on
the microstructure and mechanical properties of the alumina obtained is extremely
important for the use of the same as biomaterials. Other applications of alpha-alumina
industrially are in obtaining parts used at high temperatures and in chemically aggressive
environments. Alpha-alumina can be synthesized from different raw materials
resulting in ceramic products with different microstructures and consequently with
diverse mechanical resistance. The synthesis of alpha-alumina pieces obtained from
gamma-alumina powders was studied in order to verify the mechanical properties of
the sintered material. The addition of graphene oxide in the gamma-alumina powder
was also studied. To evaluate the mechanical strength of the obtained alpha-alumina
specimens and to correlate the mechanical resistance with the precursor used in
alpha-alumina synthesis it was used three -point bend strength testing.
Palavras-Chave:
aluminium oxides;
aluminium compounds;
graphene;
oxides
MUNHOZ JUNIOR, ANTONIO H.; GALHARDO, GUSTAVO F.; ORTEGA, FERNANDO dos S.; LIMA, NELSON B. de; MORAES, DENISON A.; MIRANDA, LEILA F. de; VALENZUELA-DIAZ, FRANCISCO R.
Alpha-alumina synthesis using gamma-alumina powders.
In:
LI, BOWEN (ed.); LI, JIAN (ed.); IKHMAYIES, SHADIA (ed.); ZHANG, MINGMING (ed.); KALAY, YUNUS E. (ed.); CARPENTER, JOHN S. (ed.); HWANG, JIANN-YANG (ed.); MONTEIRO, SERGIO N. (ed.); BAI, CHENGUANG (ed.); ESCOBEDO-DIAZ, JUAN P. (ed.); SPENA, PASQUALE R. (ed.); GOSWAMI, RAMASIS (ed.).
Characterization of Minerals, Metals, and Materials.
Cham, CZ, Switzerland: Springer Nature Switzerland AG,
2019.
p. 441-451.
(The Minerals, Metals & Materials Series).
DOI:
10.1007/978-3-030-05749-7_44.
Disponível em: http://repositorio.ipen.br/handle/123456789/29857. Acesso em: $DATA.
Esta referência é gerada automaticamente de acordo com as normas do estilo IPEN/SP (ABNT NBR 6023) e recomenda-se uma verificação final e ajustes caso necessário.
Como referenciar este item
-
MONTEIRO, ALEX S.
; BARREIRA, DAILI A.S.
; SILVA, JAQUELINE S.
; OLIVEIRA, RENE R.
; VALENZUELA-DIAZ, FRANCISCO R.; MOURA, ESPERIDIANA A.B.
.
An investigation of mechanical and thermal properties of polypropylene reinforced with different clays.
In: LI, BOWEN (Ed.); LI, JIAN (Ed.); IKHMAYIES, SHADIA (Ed.); ZHANG, MINGMING (Ed.); KALAY, YUNUS E. (Ed.); CARPENTER, JOHN S. (Ed.); HWANG, JIANN-YANG (Ed.); MONTEIRO, SERGIO N. (Ed.); BAI, CHENGUANG (Ed.); ESCOBEDO-DIAZ, JUAN P. (Ed.); SPENA, PASQUALE R. (Ed.); GOSWAMI, RAMASIS (Ed.).
Characterization of Minerals, Metals, and Materials.
Cham, CZ, Switzerland: Springer Nature Switzerland AG,
2019.
p. 453-463,
(The Minerals, Metals & Materials Series).
DOI:
10.1007/978-3-030-05749-7_45
Abstract:
Nowadays, environmental awareness and an increasing concern with the
greenhouse effect have increased the interest in composite materials containing at
least one of the components from natural origin. Natural clays seem to be a good
alternative because they are environmentally acceptable, naturally abundant minerals,
and due to their ability to intercalate and exfoliate in the polymer matrix led to an
improvement in mechanical, thermal and barrier properties, compared to the neat
polymer. This work presents an investigation of the effects of incorporation of two
different clays on mechanical and thermal properties of polypropylene (PP) matrix.
PP with 1.5–3.0 wt% of the Cloisite® (commercial clay), and light green clay (noncommercial
Brazilian clay), was prepared by melt extrusion process. The neat PP
and its nanocomposites were characterized by mechanical tests, SEM, DSC, TGA
and XRD analyses. In addition, clay characterization by XRD has also been carried
out.
Palavras-Chave:
polypropylene;
clays;
tensile properties;
thermal gravimetric analysis
MONTEIRO, ALEX S.; BARREIRA, DAILI A.S.; SILVA, JAQUELINE S.; OLIVEIRA, RENE R.; VALENZUELA-DIAZ, FRANCISCO R.; MOURA, ESPERIDIANA A.B.
An investigation of mechanical and thermal properties of polypropylene reinforced with different clays.
In:
LI, BOWEN (ed.); LI, JIAN (ed.); IKHMAYIES, SHADIA (ed.); ZHANG, MINGMING (ed.); KALAY, YUNUS E. (ed.); CARPENTER, JOHN S. (ed.); HWANG, JIANN-YANG (ed.); MONTEIRO, SERGIO N. (ed.); BAI, CHENGUANG (ed.); ESCOBEDO-DIAZ, JUAN P. (ed.); SPENA, PASQUALE R. (ed.); GOSWAMI, RAMASIS (ed.).
Characterization of Minerals, Metals, and Materials.
Cham, CZ, Switzerland: Springer Nature Switzerland AG,
2019.
p. 453-463.
(The Minerals, Metals & Materials Series).
DOI:
10.1007/978-3-030-05749-7_45.
Disponível em: http://repositorio.ipen.br/handle/123456789/29845. Acesso em: $DATA.
Esta referência é gerada automaticamente de acordo com as normas do estilo IPEN/SP (ABNT NBR 6023) e recomenda-se uma verificação final e ajustes caso necessário.
Como referenciar este item
-
KOMATSU, LUIZ G.H.
; OLIANI, WASHINGTON L.
; OLIVEIRA, CAMILA B.
; RANGARI, VIJAYA K.; PARRA, DUCLERC F.
.
Application of nanoparticles of ZnO and ZnO-doped-Ag in polymeric blend of HMSPP/SEBS for biocide activity.
In: LI, JIAN (Ed.); ZHANG, MINGMING (Ed.); LI, BOWEN (Ed.); MONTEIRO, SERGIO N. (Ed.); IKHMAYIES, SHADIA (Ed.); KALAY, YUNUS E. (Ed.); HWANG, JIANN-YANG (Ed.); ESCOBEDO-DIAZ, JUAN P. (Ed.); CARPENTER, JOHN S. (Ed.); BROWN, ANDREW D. (Ed.).
Characterization of Minerals, Metals, and Materials.
Cham, CZ, Switzerland: Springer Nature Switzerland AG,
2020.
p. 429-435,
(The Minerals, Metals & Materials Series).
DOI:
10.1007/978-3-030-36628-5_41
Abstract:
In this study, the nanoparticles of Zinc oxide (ZnO) and Zinc oxide doped
with Silver (ZnO/Ag) were synthesized in laboratory. The incorporation of these
nanoparticles in the blend of high melt strength polypropylene (HMSPP) and styrene–
ethylene/butadiene–styrene (SEBS) was carried by melt processing. The obtained
materials were evaluated by X-ray diffraction (XRD), Raman Spectroscopy, Differential
Scanning Calorimetry (DSC), biocidal tests against the bacteria Escherichia
coli and Staphylococcus aureus. The nanoparticles showed size between 150 and
200 nm and spherical form. HMSPP/SEBS/AgNPs/ZnO films incorporated with the
nanoparticles have demonstrated biocidal effect against the bacteria E. coli and S.
aureus when irradiated at 12.5 kGy.
Palavras-Chave:
zinc oxides;
antimicrobial agents;
nanoparticles;
antibiotics
KOMATSU, LUIZ G.H.; OLIANI, WASHINGTON L.; OLIVEIRA, CAMILA B.; RANGARI, VIJAYA K.; PARRA, DUCLERC F.
Application of nanoparticles of ZnO and ZnO-doped-Ag in polymeric blend of HMSPP/SEBS for biocide activity.
In:
LI, JIAN (ed.); ZHANG, MINGMING (ed.); LI, BOWEN (ed.); MONTEIRO, SERGIO N. (ed.); IKHMAYIES, SHADIA (ed.); KALAY, YUNUS E. (ed.); HWANG, JIANN-YANG (ed.); ESCOBEDO-DIAZ, JUAN P. (ed.); CARPENTER, JOHN S. (ed.); BROWN, ANDREW D. (ed.).
Characterization of Minerals, Metals, and Materials.
Cham, CZ, Switzerland: Springer Nature Switzerland AG,
2020.
p. 429-435.
(The Minerals, Metals & Materials Series).
DOI:
10.1007/978-3-030-36628-5_41.
Disponível em: http://repositorio.ipen.br/handle/123456789/31852. Acesso em: $DATA.
Esta referência é gerada automaticamente de acordo com as normas do estilo IPEN/SP (ABNT NBR 6023) e recomenda-se uma verificação final e ajustes caso necessário.
Como referenciar este item
-
COSTA, ROBSON S.
; MOURA, ESPERIDIANA A.B.
.
A bibliometric analysis of the strategy and performance measurement of the polymer matrix nanomaterials development scenario globally, and the participation of Brazil.
In: LI, JIAN (Ed.); ZHANG, MINGMING (Ed.); LI, BOWEN (Ed.); MONTEIRO, SERGIO N. (Ed.); IKHMAYIES, SHADIA (Ed.); KALAY, YUNUS E. (Ed.); HWANG, JIANN-YANG (Ed.); ESCOBEDO-DIAZ, JUAN P. (Ed.); CARPENTER, JOHN S. (Ed.); BROWN, ANDREW D. (Ed.).
Characterization of Minerals, Metals, and Materials.
Cham, CZ, Switzerland: Springer Nature Switzerland AG,
2020.
p. 329-342,
(The Minerals, Metals & Materials Series).
DOI:
10.1007/978-3-030-36628-5_31
Abstract:
Extensive studies have been conducted worldwide on the strategy for the
development of nanomaterials. One of the known strategies for this has aroused
interest in the market is the incorporation of the nanoparticles, extracted from the
residues in thematrices of the polymers for the production of environmentally correct
nanocomposites. This work presents a survey of the scientific knowledge of nanomaterials
of the polymer matrix and a panoramic view of the evolution of these nanomaterials
are subject, in order to meet the criteria of sustainable development due to the
environmental concerns. This study also intends to use bibliometric tools to database
acquisition and analysis of bibliographic reviews for an evaluation of the scenarios
in the world on the development of polymeric nanomaterials based on three different
classes of polymeric nanocomposites: polymer/clay; polymer/graphene, and
polymer/nanocellulose nanocomposites.
Palavras-Chave:
statistical data;
nanomaterials;
nanocomposites;
scientific personnel;
knowledge management;
polymers
COSTA, ROBSON S.; MOURA, ESPERIDIANA A.B.
A bibliometric analysis of the strategy and performance measurement of the polymer matrix nanomaterials development scenario globally, and the participation of Brazil.
In:
LI, JIAN (ed.); ZHANG, MINGMING (ed.); LI, BOWEN (ed.); MONTEIRO, SERGIO N. (ed.); IKHMAYIES, SHADIA (ed.); KALAY, YUNUS E. (ed.); HWANG, JIANN-YANG (ed.); ESCOBEDO-DIAZ, JUAN P. (ed.); CARPENTER, JOHN S. (ed.); BROWN, ANDREW D. (ed.).
Characterization of Minerals, Metals, and Materials.
Cham, CZ, Switzerland: Springer Nature Switzerland AG,
2020.
p. 329-342.
(The Minerals, Metals & Materials Series).
DOI:
10.1007/978-3-030-36628-5_31.
Disponível em: http://repositorio.ipen.br/handle/123456789/31850. Acesso em: $DATA.
Esta referência é gerada automaticamente de acordo com as normas do estilo IPEN/SP (ABNT NBR 6023) e recomenda-se uma verificação final e ajustes caso necessário.
Como referenciar este item
-
MUNHOZ JUNIOR, ANTONIO H.; PACHECO, CAROLINE V.; MELO, HENRIQUE T.T.S.; PERES, RENATO M.; SILVA, LEONARDO G. de A. e
; MIRANDA, LEILA F. de; ROMERO FILHO, MARCOS.
Characterization of a composite of high-impact polystyrene, pseudoboehmite and graphene oxide.
In: LI, BOWEN (Ed.); LI, JIAN (Ed.); IKHMAYIES, SHADIA (Ed.); ZHANG, MINGMING (Ed.); KALAY, YUNUS E. (Ed.); CARPENTER, JOHN S. (Ed.); HWANG, JIANN-YANG (Ed.); MONTEIRO, SERGIO N. (Ed.); BAI, CHENGUANG (Ed.); ESCOBEDO-DIAZ, JUAN P. (Ed.); SPENA, PASQUALE R. (Ed.); GOSWAMI, RAMASIS (Ed.).
Characterization of Minerals, Metals, and Materials.
Cham, CZ, Switzerland: Springer Nature Switzerland AG,
2019.
p. 511-522,
(The Minerals, Metals & Materials Series).
DOI:
10.1007/978-3-030-05749-7_51
Abstract:
The application of a composite material of pseudoboehmite, polystyrene
and graphene oxide was studied. The present work is the synthesis and characterization
of high-impact polystyrene (HIPS) nanocomposite, with pseudoboehmite
(PSB) and graphene oxide. Pseudoboehmite particles with nanometric dimensions
were obtained by sol-gel process. The composites were characterized by mechanical
tests (tensile strength, flexural strength, Izod Impact, Shore D Hardness), thermal
(Flow index, temperature of thermal deflection under load-HDT, Vicat softening
temperature, differential tests thermal analyses and thermogravimetric analysis) and
morphologically by Scanning Electron Microscopy (SEM). The results obtained
were compared with HIPS matrix properties, without PSB and graphene oxide addition.
From the thermal analyzes, composite samples showed higher decomposition
temperatures compared to pure high-impact polystyrene especially in the thermogravimetric
analysis results, showing a considerable increase in the temperature at
which material decomposition begins (322 °C for pure high-impact polystyrene and
380 °C for the composite).
Palavras-Chave:
composite materials;
polystyrene;
graphene;
oxides;
nanocomposites;
aluminium compounds
MUNHOZ JUNIOR, ANTONIO H.; PACHECO, CAROLINE V.; MELO, HENRIQUE T.T.S.; PERES, RENATO M.; SILVA, LEONARDO G. de A. e; MIRANDA, LEILA F. de; ROMERO FILHO, MARCOS.
Characterization of a composite of high-impact polystyrene, pseudoboehmite and graphene oxide.
In:
LI, BOWEN (ed.); LI, JIAN (ed.); IKHMAYIES, SHADIA (ed.); ZHANG, MINGMING (ed.); KALAY, YUNUS E. (ed.); CARPENTER, JOHN S. (ed.); HWANG, JIANN-YANG (ed.); MONTEIRO, SERGIO N. (ed.); BAI, CHENGUANG (ed.); ESCOBEDO-DIAZ, JUAN P. (ed.); SPENA, PASQUALE R. (ed.); GOSWAMI, RAMASIS (ed.).
Characterization of Minerals, Metals, and Materials.
Cham, CZ, Switzerland: Springer Nature Switzerland AG,
2019.
p. 511-522.
(The Minerals, Metals & Materials Series).
DOI:
10.1007/978-3-030-05749-7_51.
Disponível em: http://repositorio.ipen.br/handle/123456789/29858. Acesso em: $DATA.
Esta referência é gerada automaticamente de acordo com as normas do estilo IPEN/SP (ABNT NBR 6023) e recomenda-se uma verificação final e ajustes caso necessário.
Como referenciar este item
-
MIRANDA, LEILA F. de; MUNHOZ JUNIOR, ANTONIO H.; MASSON, TEREZINHA J.; SILVA, LEONARDO G. de A. e
; FRIEHE, KARL.
Characterization of antistatic packaging based on PET/rGO.
In: LI, BOWEN (Ed.); LI, JIAN (Ed.); IKHMAYIES, SHADIA (Ed.); ZHANG, MINGMING (Ed.); KALAY, YUNUS E. (Ed.); CARPENTER, JOHN S. (Ed.); HWANG, JIANN-YANG (Ed.); MONTEIRO, SERGIO N. (Ed.); BAI, CHENGUANG (Ed.); ESCOBEDO-DIAZ, JUAN P. (Ed.); SPENA, PASQUALE R. (Ed.); GOSWAMI, RAMASIS (Ed.).
Characterization of Minerals, Metals, and Materials.
Cham, CZ, Switzerland: Springer Nature Switzerland AG,
2019.
p. 523-534,
(The Minerals, Metals & Materials Series).
DOI:
10.1007/978-3-030-05749-7_52
Abstract:
Package for electronic components is one that protects an electronic or
electrical device against electrostatic discharge. Traditionally, antistatic packages
are produced with polystyrene (PS) or polypropylene (PP) filled with carbon black.
Recently, studies have been carried out successfully for the application of polyethylene
terephthalate (PET) filled with carbon black. This work aimed to obtain and
characterize nanocomposites based on PET filled with reduced graphene oxide (rGO)
and compare its physicochemical properties with PET filled with carbon black and
PP filled with carbon black used in anti-static packaging. PET compounds containing
0.1; 0.3; 0.5 and 0.7wt% reduced graphene oxide were obtained by the modified
Hummers process from the graphite and reduced with hydrazine. The thermomechanical,
electrical and morphological properties of the obtained compounds were
determined. The results showed that the addition of reduced graphene oxide to PET
causes an increase in the melt flow index, also increase the tensile strength and electrical
conductivity. The addition of reduced graphene oxide promotes the decrease
in the hardness and thermal resistance of the obtained nanocomposites. Nanocomposites
based on PET containing 0.5wt% and 0.7wt% reduced graphene oxide can
be used in the handling, transport and storage of electronic components since their
mechanical, thermal and resistivity properties are satisfactory for this purpose.
Palavras-Chave:
nanocomposites;
polyethylene terephthalate;
graphene;
oxides;
packaging
MIRANDA, LEILA F. de; MUNHOZ JUNIOR, ANTONIO H.; MASSON, TEREZINHA J.; SILVA, LEONARDO G. de A. e; FRIEHE, KARL.
Characterization of antistatic packaging based on PET/rGO.
In:
LI, BOWEN (ed.); LI, JIAN (ed.); IKHMAYIES, SHADIA (ed.); ZHANG, MINGMING (ed.); KALAY, YUNUS E. (ed.); CARPENTER, JOHN S. (ed.); HWANG, JIANN-YANG (ed.); MONTEIRO, SERGIO N. (ed.); BAI, CHENGUANG (ed.); ESCOBEDO-DIAZ, JUAN P. (ed.); SPENA, PASQUALE R. (ed.); GOSWAMI, RAMASIS (ed.).
Characterization of Minerals, Metals, and Materials.
Cham, CZ, Switzerland: Springer Nature Switzerland AG,
2019.
p. 523-534.
(The Minerals, Metals & Materials Series).
DOI:
10.1007/978-3-030-05749-7_52.
Disponível em: http://repositorio.ipen.br/handle/123456789/29846. Acesso em: $DATA.
Esta referência é gerada automaticamente de acordo com as normas do estilo IPEN/SP (ABNT NBR 6023) e recomenda-se uma verificação final e ajustes caso necessário.
Como referenciar este item
-
MIRANDA, LEILA F. de; BARBOSA, ISABELLA T.F.; MASSON, TEREZINHA J.; MUNHOZ JUNIOR, ANTONIO H.; SILVA, LEONARDO G. de A. e
; GONÇALVES, ALEKSANDRA A.A..
Characterization of hydrogels for release of cosmetic assets containing nanoemulsions of mandellic acid in different concentrations of pseudoboehmite.
In: LI, JIAN (Ed.); ZHANG, MINGMING (Ed.); LI, BOWEN (Ed.); MONTEIRO, SERGIO N. (Ed.); IKHMAYIES, SHADIA (Ed.); KALAY, YUNUS E. (Ed.); HWANG, JIANN-YANG (Ed.); ESCOBEDO-DIAZ, JUAN P. (Ed.); CARPENTER, JOHN S. (Ed.); BROWN, ANDREW D. (Ed.).
Characterization of Minerals, Metals, and Materials.
Cham, CZ, Switzerland: Springer Nature Switzerland AG,
2020.
p. 477-489,
(The Minerals, Metals & Materials Series).
DOI:
10.1007/978-3-030-36628-5_47
Abstract:
Hydrogel is a gel formed by a three-dimensional network of hydrophilic
polymers that are used as advanced asset release systems with good biocompatibility.
The use of ionizing radiation to obtain hydrogels promotes cross-linking with
the concomitant sterilization of the hydrogels. Aiming at the release of the mandelic
acid (an active cosmetic), hydrogels were prepared using different concentration of
poly(N-vinyl-2-pyrrolidone) (PVP), poly(ethylene glycol) (PEG) and agar containing
nanoparticles of the pseudoboehmite, mandelic acid and Palmarosa and Rosa
Mosqueta oils nanoemulsions, submitted to irradiation dose of 25 kGy. Hydrogels
containing 7.5 wt% PVP showed better absorption, slip, odor results, and those with
10 wt% PVP were found to be inadequate. Nanoemulsions were characterized by
acidity, density and optical microscopy; hydrogels samples were put under isothermal
dehydration with air entrainment and dehydration was examined as a function of
time. The results showed that the composition of hydrogels is stable, and the increase
of the concentration of pseudoboehmite in hydrogels sample containing Palmarosa
oil suffers less dehydration and those containing the two oils showed an increase
in dehydration. The hydrogels obtained with 7.5 wt% of PVP and 3 wt% of pseudoboehmite,
Rosa Mosqueta vegetable oil and mandelic acid are most suitable to be
used in cosmetic products.
Palavras-Chave:
hydrogels;
mandelic acid;
pvp;
consumer products
MIRANDA, LEILA F. de; BARBOSA, ISABELLA T.F.; MASSON, TEREZINHA J.; MUNHOZ JUNIOR, ANTONIO H.; SILVA, LEONARDO G. de A. e; GONÇALVES, ALEKSANDRA A.A.
Characterization of hydrogels for release of cosmetic assets containing nanoemulsions of mandellic acid in different concentrations of pseudoboehmite.
In:
LI, JIAN (ed.); ZHANG, MINGMING (ed.); LI, BOWEN (ed.); MONTEIRO, SERGIO N. (ed.); IKHMAYIES, SHADIA (ed.); KALAY, YUNUS E. (ed.); HWANG, JIANN-YANG (ed.); ESCOBEDO-DIAZ, JUAN P. (ed.); CARPENTER, JOHN S. (ed.); BROWN, ANDREW D. (ed.).
Characterization of Minerals, Metals, and Materials.
Cham, CZ, Switzerland: Springer Nature Switzerland AG,
2020.
p. 477-489.
(The Minerals, Metals & Materials Series).
DOI:
10.1007/978-3-030-36628-5_47.
Disponível em: http://repositorio.ipen.br/handle/123456789/31853. Acesso em: $DATA.
Esta referência é gerada automaticamente de acordo com as normas do estilo IPEN/SP (ABNT NBR 6023) e recomenda-se uma verificação final e ajustes caso necessário.
Como referenciar este item
-
FRANCISCO, DANAE L.
; PAIVA, LUCILENE B. de; ALDEIA, WAGNER; LUGAO, ADEMAR B.
; MOURA, ESPERIDIANA A.B.
.
Characterization of non-covalently functionalized halloysite.
In: LI, BOWEN (Ed.); LI, JIAN (Ed.); IKHMAYIES, SHADIA (Ed.); ZHANG, MINGMING (Ed.); KALAY, YUNUS E. (Ed.); CARPENTER, JOHN S. (Ed.); HWANG, JIANN-YANG (Ed.); MONTEIRO, SERGIO N. (Ed.); FIRRAO, DONATO (Ed.); BROWN, ANDREW (Ed.); BAI, CHENGUANG (Ed.); PENG, ZHIWEI (Ed.); ESCOBEDO-DIAZ, JUAN P. (Ed.); GOSWAMI, RAMASIS (Ed.); KIM, JEONGGUK (Ed.).
Characterization of Minerals, Metals, and Materials. TMS.
Cham, CZ, Switzerland: Springer International Publishing AG,
2018.
p. 317-323,
(The Minerals, Metals & Materials Series).
DOI:
10.1007/978-3-319-72484-3_34
Abstract:
The inorganic nanotube halloysite (HNT) is a promising type of natural occurring filler for polymers. Its characteristics, such as high aspect ratio (10–50), small size, and high strength (elastic modulus—140 GPa) suggest that HNTs have a potential use in high-performance polymer nanocomposites. Compared to other nanoclays and nanosilica the relatively low content of hydroxyl groups on their surfaces makes HNTs relatively hydrophobic, although, sometimes, this is not sufficient for guaranty a good interfacial adhesion in composite systems. Further hydrophobic treatment is required to improve HNTs compatibility with polymer matrixes, maximizing interfacial interactions. In the present study, different percentages of EPB (2,2-(1,2-ethene diyldi-4,1-phenylene) bisbenzoxazole) was used to perform a non-covalent functionalization of halloysite, based on electron transfer interactions. The functionalization is characterized by specific surface area (BET), thermogravimetric analysis (TG) and water/toluene extraction experiment.
Palavras-Chave:
nanotubes;
silicate minerals;
clays;
benzoxazoles;
thermal gravimetric analysis;
toluene;
polymers
FRANCISCO, DANAE L.; PAIVA, LUCILENE B. de; ALDEIA, WAGNER; LUGAO, ADEMAR B.; MOURA, ESPERIDIANA A.B.
Characterization of non-covalently functionalized halloysite.
In:
LI, BOWEN (ed.); LI, JIAN (ed.); IKHMAYIES, SHADIA (ed.); ZHANG, MINGMING (ed.); KALAY, YUNUS E. (ed.); CARPENTER, JOHN S. (ed.); HWANG, JIANN-YANG (ed.); MONTEIRO, SERGIO N. (ed.); FIRRAO, DONATO (ed.); BROWN, ANDREW (ed.); BAI, CHENGUANG (ed.); PENG, ZHIWEI (ed.); ESCOBEDO-DIAZ, JUAN P. (ed.); GOSWAMI, RAMASIS (ed.); KIM, JEONGGUK (ed.).
Characterization of Minerals, Metals, and Materials. TMS.
Cham, CZ, Switzerland: Springer International Publishing AG,
2018.
p. 317-323.
(The Minerals, Metals & Materials Series).
DOI:
10.1007/978-3-319-72484-3_34.
Disponível em: http://repositorio.ipen.br/handle/123456789/28878. Acesso em: $DATA.
Esta referência é gerada automaticamente de acordo com as normas do estilo IPEN/SP (ABNT NBR 6023) e recomenda-se uma verificação final e ajustes caso necessário.
Como referenciar este item
-
MONTEIRO, ALEX S.
; BARREIRA, DAILI A.S.
; BARTOLOMEI, SUELLEN S.
; OLIVEIRA, RENE R.
; MOURA, ESPERIDIANA A.B. de
.
Comparative study of the use of rice husk ashes and graphite as fillers in polypropylene matrix composites.
In: LI, BOWEN (Ed.); LI, JIAN (Ed.); IKHMAYIES, SHADIA (Ed.); ZHANG, MINGMING (Ed.); KALAY, YUNUS E. (Ed.); CARPENTER, JOHN S. (Ed.); HWANG, JIANN-YANG (Ed.); MONTEIRO, SERGIO N. (Ed.); BAI, CHENGUANG (Ed.); ESCOBEDO-DIAZ, JUAN P. (Ed.); SPENA, PASQUALE R. (Ed.); GOSWAMI, RAMASIS (Ed.).
Characterization of Minerals, Metals, and Materials.
Cham, CZ, Switzerland: Springer Nature Switzerland AG,
2019.
p. 561-570,
(The Minerals, Metals & Materials Series).
DOI:
10.1007/978-3-030-05749-7_56
Abstract:
In recent years, carbonaceous materials have been widely studied for polymer
composite applications due to its capability to improve the engineering properties
of the polymeric matrix. Among various carbonaceous fillers, carbon nanotube,
graphene, and graphite promise to be a suitable reinforcement of polymers. Rice
husk ash (RHA), a large residue rich in carbon and silica produced by the burning
of rice husk offers also an immense potential as a carbonaceous filler for polymer
composites on account of its lowcost, lowdensity, high strength and elastic modulus,
no health risks, and renewability. This work aims at studying the effects of RHA and
graphite as fillers in polypropylene (PP) matrix composites. The composites PP/RHA
and PP/graphite were produced by melting extrusion process. The materials obtained
were subjected to mechanical tests, XRD, TG, and FEG-SEM analyses. Comparison
studies between neat PP properties and its composites were carried out.
Palavras-Chave:
matrix materials;
polypropylene;
mechanical properties;
thermodynamic properties;
carbonaceous materials
MONTEIRO, ALEX S.; BARREIRA, DAILI A.S.; BARTOLOMEI, SUELLEN S.; OLIVEIRA, RENE R.; MOURA, ESPERIDIANA A.B. de.
Comparative study of the use of rice husk ashes and graphite as fillers in polypropylene matrix composites.
In:
LI, BOWEN (ed.); LI, JIAN (ed.); IKHMAYIES, SHADIA (ed.); ZHANG, MINGMING (ed.); KALAY, YUNUS E. (ed.); CARPENTER, JOHN S. (ed.); HWANG, JIANN-YANG (ed.); MONTEIRO, SERGIO N. (ed.); BAI, CHENGUANG (ed.); ESCOBEDO-DIAZ, JUAN P. (ed.); SPENA, PASQUALE R. (ed.); GOSWAMI, RAMASIS (ed.).
Characterization of Minerals, Metals, and Materials.
Cham, CZ, Switzerland: Springer Nature Switzerland AG,
2019.
p. 561-570.
(The Minerals, Metals & Materials Series).
DOI:
10.1007/978-3-030-05749-7_56.
Disponível em: http://repositorio.ipen.br/handle/123456789/29847. Acesso em: $DATA.
Esta referência é gerada automaticamente de acordo com as normas do estilo IPEN/SP (ABNT NBR 6023) e recomenda-se uma verificação final e ajustes caso necessário.
Como referenciar este item
-
SOARES, CARLOS
; SANTANA, JULYANA
; GUVEN, OLGUN; MOURA, ESPERIDIANA A.B.
.
A comparison between graphene oxide and reduced graphene oxide as reinforcement agents in polypropylene nanocomposite using irradiated polypropylene as compatibilizer.
In: LI, JIAN (Ed.); ZHANG, MINGMING (Ed.); LI, BOWEN (Ed.); MONTEIRO, SERGIO N. (Ed.); IKHMAYIES, SHADIA (Ed.); KALAY, YUNUS E. (Ed.); HWANG, JIANN-YANG (Ed.); ESCOBEDO-DIAZ, JUAN P. (Ed.); CARPENTER, JOHN S. (Ed.); BROWN, ANDREW D. (Ed.).
Characterization of Minerals, Metals, and Materials.
Cham, CZ, Switzerland: Springer Nature Switzerland AG,
2020.
p. 385-394,
(The Minerals, Metals & Materials Series).
DOI:
10.1007/978-3-030-36628-5_36
Abstract:
Graphene is thematerial with the bestmechanical resistance ever encountered.
Various types of studies have been carried out on possible applications. The use
as a reinforcement in nanocomposites has shown to be a promising field, but some
studies indicate that the graphene oxide (GO) and reduced graphene oxide (RGO)
have better results as reinforcement, due to the functional groups,which allowa better
adhesion with the matrix. This study analyzes the production of polypropylene (PP)
nanocomposite comparing the use of graphene oxide (GO) and reduced graphene
oxide (RGO) as fillers and irradiated polypropylene as a coupling agent.Atwin-screw
extruder and injection molding machine were used to produce the nanocomposite
PP reinforced with 0.2 wt% of GO and RGO by melt blending. The GO and RGO
were characterized byXRDanalysis.The nanocomposite sampleswere characterized
by XRD, SEM, TG, DSC and mechanical test.
Palavras-Chave:
graphene;
oxides;
polypropylene;
nanocomposites;
gamma radiation;
stresses;
tensile properties
SOARES, CARLOS; SANTANA, JULYANA; GUVEN, OLGUN; MOURA, ESPERIDIANA A.B.
A comparison between graphene oxide and reduced graphene oxide as reinforcement agents in polypropylene nanocomposite using irradiated polypropylene as compatibilizer.
In:
LI, JIAN (ed.); ZHANG, MINGMING (ed.); LI, BOWEN (ed.); MONTEIRO, SERGIO N. (ed.); IKHMAYIES, SHADIA (ed.); KALAY, YUNUS E. (ed.); HWANG, JIANN-YANG (ed.); ESCOBEDO-DIAZ, JUAN P. (ed.); CARPENTER, JOHN S. (ed.); BROWN, ANDREW D. (ed.).
Characterization of Minerals, Metals, and Materials.
Cham, CZ, Switzerland: Springer Nature Switzerland AG,
2020.
p. 385-394.
(The Minerals, Metals & Materials Series).
DOI:
10.1007/978-3-030-36628-5_36.
Disponível em: http://repositorio.ipen.br/handle/123456789/31851. Acesso em: $DATA.
Esta referência é gerada automaticamente de acordo com as normas do estilo IPEN/SP (ABNT NBR 6023) e recomenda-se uma verificação final e ajustes caso necessário.
Como referenciar este item
-
OLIANI, WASHINGTON L.
; PARRA, DUCLERC F.
; LIMA, LUIS F.C.P.
; OTAGURO, HARUMI; FERRETO, HELIO F.R.
; LUGAO, ADEMAR B.
.
Contribution to the β relaxation study of the HDPE, LDPE and LLDPE.
In: IKHMAYIES, SHADIA (Ed.); LI, BOWEN (Ed.); CARPENTER, JOHN S. (Ed.); LI, JIAN (Ed.); HWANG, JIANN-YANG (Ed.); MONTEIRO, SERGIO N. (Ed.); FIRRAO, DONATO (Ed.); ZHANG, MINGMING (Ed.); PENG, ZHIWEI (Ed.); ESCOBEDO-DIAZ, JUAN P. (Ed.); BAI, CHENGUANG (Ed.); KALAY, YUNUS E. (Ed.); GOSWAMI, RAMASIS (Ed.); KIM, JEONGGUK (Ed.).
Characterization of Minerals, Metals, and Materials.
Gewerbestrasse, Switzerland: Springer International Publishing AG.,
2017.
p. 617-626,
(The Minerals, Metals & Materials Series).
Abstract:
The activation of three polyethylenes, the low density, the high density and the linear low density polyethylene, was determined by means of dynamic mechanical analysis (DMA). Storage modulus and tan δ spectra were obtained as a function of the temperature from −60 to 50 °C with a heating rate of 2° min−1 at frequencies of 1, 2 and 5 Hz and measurement strain amplitude of 10−5. In the tan δ spectra, a small peak in the β region of the three polyethylenes was found and substantiated by subtracting the growing exponential background. This procedure was based on a model that associates the dislocation motion on metals under cyclic stress to vibrating strings and considering the same for the polymeric chains. For the determination of the activation energy we have utilized the frequency versus the reciprocal of the absolute temperature peak of the tan δ. The values obtained for the three polyethylenes, the low density, the high density and the linear low density were, 362 ± 12, 266 ± 9 and 197 ± 6 kJ mol−1, respectively, which were compared with those presented in the literature.
Palavras-Chave:
polyethylenes;
relaxation;
activation energy;
density
OLIANI, WASHINGTON L.; PARRA, DUCLERC F.; LIMA, LUIS F.C.P.; OTAGURO, HARUMI; FERRETO, HELIO F.R.; LUGAO, ADEMAR B.
Contribution to the β relaxation study of the HDPE, LDPE and LLDPE.
In:
IKHMAYIES, SHADIA (ed.); LI, BOWEN (ed.); CARPENTER, JOHN S. (ed.); LI, JIAN (ed.); HWANG, JIANN-YANG (ed.); MONTEIRO, SERGIO N. (ed.); FIRRAO, DONATO (ed.); ZHANG, MINGMING (ed.); PENG, ZHIWEI (ed.); ESCOBEDO-DIAZ, JUAN P. (ed.); BAI, CHENGUANG (ed.); KALAY, YUNUS E. (ed.); GOSWAMI, RAMASIS (ed.); KIM, JEONGGUK (ed.).
Characterization of Minerals, Metals, and Materials.
Gewerbestrasse, Switzerland: Springer International Publishing AG.,
2017.
p. 617-626.
(The Minerals, Metals & Materials Series).
Disponível em: http://repositorio.ipen.br/handle/123456789/27926. Acesso em: $DATA.
Esta referência é gerada automaticamente de acordo com as normas do estilo IPEN/SP (ABNT NBR 6023) e recomenda-se uma verificação final e ajustes caso necessário.
Como referenciar este item
-
ARANTES, MARIANA M.
; SANTANA, JULYANA
; VALENZUELA-DIAZ, F.R.; RANGARI, VIJAY K.; GUVEN, OLGUN; MOURA, ESPERIDIANA A.B.
.
Development and characterization of recycled-HDPE/EVA foam reinforced with babassu coconut epicarp fiber residues.
In: LI, BOWEN (Ed.); LI, JIAN (Ed.); IKHMAYIES, SHADIA (Ed.); ZHANG, MINGMING (Ed.); KALAY, YUNUS E. (Ed.); CARPENTER, JOHN S. (Ed.); HWANG, JIANN-YANG (Ed.); MONTEIRO, SERGIO N. (Ed.); FIRRAO, DONATO (Ed.); BROWN, ANDREW (Ed.); BAI, CHENGUANG (Ed.); PENG, ZHIWEI (Ed.); ESCOBEDO-DIAZ, JUAN P. (Ed.); GOSWAMI, RAMASIS (Ed.); KIM, JEONGGUK (Ed.).
Characterization of Minerals, Metals, and Materials. TMS.
Cham, CZ, Switzerland: Springer International Publishing AG,
2018.
p. 497-506,
(The Minerals, Metals & Materials Series).
DOI:
10.1007/978-3-319-72484-3_52
Abstract:
Nowadays, the development of polymeric materials reinforced with residues of vegetal fibers is becoming popular for application in different segments, from the automotive to the civil construction and furniture industry. Vegetal fiber residues may be used as reinforcement of the recycled polymer materials, for instance, to produce foams to packaging or to thermal and acoustic isolation for green building application. This work is focused on the development and characterization of recycled-HDPE/EVA foam reinforced with fiber residues from babassu coconut epicarp. Firstly, composites based on recycled-HDPE/EVA blend reinforced with babassu coconut fiber were obtained by melting extrusion process. The composites were then extruded in a special single screw for foaming. The foam samples were submitted to mechanical tests, density measurement, DSC, TG, and FE-SEM analysis.
Palavras-Chave:
coconut palms;
coconuts;
fibers;
polyethylenes;
polymerization;
polyvinyls;
recycling
ARANTES, MARIANA M.; SANTANA, JULYANA; VALENZUELA-DIAZ, F.R.; RANGARI, VIJAY K.; GUVEN, OLGUN; MOURA, ESPERIDIANA A.B.
Development and characterization of recycled-HDPE/EVA foam reinforced with babassu coconut epicarp fiber residues.
In:
LI, BOWEN (ed.); LI, JIAN (ed.); IKHMAYIES, SHADIA (ed.); ZHANG, MINGMING (ed.); KALAY, YUNUS E. (ed.); CARPENTER, JOHN S. (ed.); HWANG, JIANN-YANG (ed.); MONTEIRO, SERGIO N. (ed.); FIRRAO, DONATO (ed.); BROWN, ANDREW (ed.); BAI, CHENGUANG (ed.); PENG, ZHIWEI (ed.); ESCOBEDO-DIAZ, JUAN P. (ed.); GOSWAMI, RAMASIS (ed.); KIM, JEONGGUK (ed.).
Characterization of Minerals, Metals, and Materials. TMS.
Cham, CZ, Switzerland: Springer International Publishing AG,
2018.
p. 497-506.
(The Minerals, Metals & Materials Series).
DOI:
10.1007/978-3-319-72484-3_52.
Disponível em: http://repositorio.ipen.br/handle/123456789/28879. Acesso em: $DATA.
Esta referência é gerada automaticamente de acordo com as normas do estilo IPEN/SP (ABNT NBR 6023) e recomenda-se uma verificação final e ajustes caso necessário.
Como referenciar este item
-
REIS, PEDRO R.S.
; SANTANA, JULYANA G.
; OLIVEIRA, RENE R.
; RANGARI, VIJAYA K.; LOURENÇO, FELIPE R.; MOURA, ESPERIDIANA A.B.
.
Development of biocomposite materials from biodegradable polymer and bio-hydroxyapatite derived from eggshells for biomedical applications.
In: LI, BOWEN (Ed.); LI, JIAN (Ed.); IKHMAYIES, SHADIA (Ed.); ZHANG, MINGMING (Ed.); KALAY, YUNUS E. (Ed.); CARPENTER, JOHN S. (Ed.); HWANG, JIANN-YANG (Ed.); MONTEIRO, SERGIO N. (Ed.); BAI, CHENGUANG (Ed.); ESCOBEDO-DIAZ, JUAN P. (Ed.); SPENA, PASQUALE R. (Ed.); GOSWAMI, RAMASIS (Ed.).
Characterization of Minerals, Metals, and Materials.
Cham, CZ, Switzerland: Springer Nature Switzerland AG,
2019.
p. 571-581,
(The Minerals, Metals & Materials Series).
DOI:
10.1007/978-3-030-05749-7_57
Abstract:
Nowadays, significant advances have been made in the development of
biodegradable polymeric materials for biomedical applications. This study aims to
prepare and characterize composite materials based on PLA/PBAT, a biodegradable
polymer blend, reinforced with bio-hydroxyapatite (bio-HAp). First, bio-HAp was
obtained from eggshell residues by the wet precipitation method. PLA/PBAT blend
with 1.5 wt% of bio-HAp was prepared by melt extrusion and injection molding
process. Part of composite samples was irradiated with gamma radiation dose of
25 kGy, at room temperature and presence of air. The effects of the bio-HAp addition
into the biodegradable blend were investigated by mechanical tests, XRD, DSC, FESEM,
and cytotoxicity “in vitro” analysis and the correlation between the properties
was discussed. In addition, the microbiological tests were carried out at irradiated and
non-irradiated composite samples in order to evaluate the efficiency of the radiation
dose of 25 kGy at composite materials sterilization.
Palavras-Chave:
apatites;
polyurethanes;
polymers;
biodegradation;
antimitotic drugs;
microorganisms;
materials testing
REIS, PEDRO R.S.; SANTANA, JULYANA G.; OLIVEIRA, RENE R.; RANGARI, VIJAYA K.; LOURENÇO, FELIPE R.; MOURA, ESPERIDIANA A.B.
Development of biocomposite materials from biodegradable polymer and bio-hydroxyapatite derived from eggshells for biomedical applications.
In:
LI, BOWEN (ed.); LI, JIAN (ed.); IKHMAYIES, SHADIA (ed.); ZHANG, MINGMING (ed.); KALAY, YUNUS E. (ed.); CARPENTER, JOHN S. (ed.); HWANG, JIANN-YANG (ed.); MONTEIRO, SERGIO N. (ed.); BAI, CHENGUANG (ed.); ESCOBEDO-DIAZ, JUAN P. (ed.); SPENA, PASQUALE R. (ed.); GOSWAMI, RAMASIS (ed.).
Characterization of Minerals, Metals, and Materials.
Cham, CZ, Switzerland: Springer Nature Switzerland AG,
2019.
p. 571-581.
(The Minerals, Metals & Materials Series).
DOI:
10.1007/978-3-030-05749-7_57.
Disponível em: http://repositorio.ipen.br/handle/123456789/29848. Acesso em: $DATA.
Esta referência é gerada automaticamente de acordo com as normas do estilo IPEN/SP (ABNT NBR 6023) e recomenda-se uma verificação final e ajustes caso necessário.
Como referenciar este item
-
ROMANO, REBECA da S.G.
; OLIANI, WASHINGTON L.
; KUMAR, VIJAYA R.; PARRA, DUCLERC F.
; LUGAO, ADEMAR B.
.
Differences in properties of pro-degradant added PP and gamma-irradiated PP under environmental aging.
In: LI, BOWEN (Ed.); LI, JIAN (Ed.); IKHMAYIES, SHADIA (Ed.); ZHANG, MINGMING (Ed.); KALAY, YUNUS E. (Ed.); CARPENTER, JOHN S. (Ed.); HWANG, JIANN-YANG (Ed.); MONTEIRO, SERGIO N. (Ed.); BAI, CHENGUANG (Ed.); ESCOBEDO-DIAZ, JUAN P. (Ed.); SPENA, PASQUALE R. (Ed.); GOSWAMI, RAMASIS (Ed.).
Characterization of Minerals, Metals, and Materials.
Cham, CZ, Switzerland: Springer Nature Switzerland AG,
2019.
p. 591-603,
(The Minerals, Metals & Materials Series).
DOI:
10.1007/978-3-030-05749-7_59
Abstract:
Polypropylene (PP) is used for different sectors of the industry and in
consequence produces a large amount of waste discarded at landfills causing serious
environmental impacts. Controlled degradation of PP can be achieved by exposing
the polymers to defined parameters, such as absorbed radiation dose, weather,
oxygen, etc. The aim of this study was to compare two methods of accelerated
degradation: gamma irradiation of PP 20 kGy and the incorporation of the commercial
pro-degradant d2w® (1 wt%) in PP. Dumbbell samples were manufactured
by the injection process and exposed to the environment aging for 90 days. Structural
changes in PP macromolecules are created upon exposure to ionizing radiation
such as main chain scission, crosslinking and peroxidation (in presence of air). Differential
scanning calorimetry (DSC), thermogravimetric analysis (TG), scanning
electron microscopy (SEM), energy-dispersive spectroscopy (EDX), X-ray fluorescence,
Fourier-transformed infrared spectroscopy (FTIR) and mechanical tests characterized
the samples. The samples previously irradiated, PP 20 kGy, after natural
aging showed higher oxidation and presence of surface cracks than the PP d2w®.
They also showed presence of carbonyl groups and decrease of melting temperature
corroborating with oxo-degradation.
Palavras-Chave:
polypropylene;
ionizing radiations;
gamma radiation;
residues;
wastes;
environment;
aging;
calorimetry
ROMANO, REBECA da S.G.; OLIANI, WASHINGTON L.; KUMAR, VIJAYA R.; PARRA, DUCLERC F.; LUGAO, ADEMAR B.
Differences in properties of pro-degradant added PP and gamma-irradiated PP under environmental aging.
In:
LI, BOWEN (ed.); LI, JIAN (ed.); IKHMAYIES, SHADIA (ed.); ZHANG, MINGMING (ed.); KALAY, YUNUS E. (ed.); CARPENTER, JOHN S. (ed.); HWANG, JIANN-YANG (ed.); MONTEIRO, SERGIO N. (ed.); BAI, CHENGUANG (ed.); ESCOBEDO-DIAZ, JUAN P. (ed.); SPENA, PASQUALE R. (ed.); GOSWAMI, RAMASIS (ed.).
Characterization of Minerals, Metals, and Materials.
Cham, CZ, Switzerland: Springer Nature Switzerland AG,
2019.
p. 591-603.
(The Minerals, Metals & Materials Series).
DOI:
10.1007/978-3-030-05749-7_59.
Disponível em: http://repositorio.ipen.br/handle/123456789/29849. Acesso em: $DATA.
Esta referência é gerada automaticamente de acordo com as normas do estilo IPEN/SP (ABNT NBR 6023) e recomenda-se uma verificação final e ajustes caso necessário.
Como referenciar este item
-
SALES, J.N.
; POVEDA, P.N.S.
; ORTIZ, A.
; VALENZUELA-DIAZ, F.R.; SILVA, L.A.
.
Effect study of the incorporation of the Green Lake clay in the polypropylene homopolymer properties.
In: LI, BOWEN (Ed.); LI, JIAN (Ed.); IKHMAYIES, SHADIA (Ed.); ZHANG, MINGMING (Ed.); KALAY, YUNUS E. (Ed.); CARPENTER, JOHN S. (Ed.); HWANG, JIANN-YANG (Ed.); MONTEIRO, SERGIO N. (Ed.); BAI, CHENGUANG (Ed.); ESCOBEDO-DIAZ, JUAN P. (Ed.); SPENA, PASQUALE R. (Ed.); GOSWAMI, RAMASIS (Ed.).
Characterization of Minerals, Metals, and Materials.
Cham, CZ, Switzerland: Springer Nature Switzerland AG,
2019.
p. 629-636,
(The Minerals, Metals & Materials Series).
DOI:
10.1007/978-3-030-05749-7_62
Abstract:
The advancement of technology has demanded the development of materials
with increasingly lighter and more resistant properties. The development of
nanocomposites first started in the mid-80s and contributed for obtaining materials
with excellent properties. In this work, Green Lake clay was organophilized
and incorporated into a commercial homopolymer polypropylene. The efficiency
of organophilization was confirmed by water swelling analysis and, later, by Xray
diffraction (XRD) analysis. Composites at 0.5, 1.0 and 2% by weight of
clay/polypropylene were prepared by double screw extrusion. The properties of the
composite were evaluated by means of Charpy impact resistance, tensile strength at
rupture, thermogravimetric analysis (TGA). Crystallinity index was determined by
differential scanning calorimetry (DSC). The organophilization processwas efficient,
the thermogravimetric analysis showed that there was no decrease in the thermal stability
of the composites when compared to pure polypropylene, and the results of
the Charpy impact resistance were equivalent when compared to the commercial
nucleant composites.
Palavras-Chave:
clays;
crystal structure;
charpy test;
polypropylene;
polymers
SALES, J.N.; POVEDA, P.N.S.; ORTIZ, A.; VALENZUELA-DIAZ, F.R.; SILVA, L.A.
Effect study of the incorporation of the Green Lake clay in the polypropylene homopolymer properties.
In:
LI, BOWEN (ed.); LI, JIAN (ed.); IKHMAYIES, SHADIA (ed.); ZHANG, MINGMING (ed.); KALAY, YUNUS E. (ed.); CARPENTER, JOHN S. (ed.); HWANG, JIANN-YANG (ed.); MONTEIRO, SERGIO N. (ed.); BAI, CHENGUANG (ed.); ESCOBEDO-DIAZ, JUAN P. (ed.); SPENA, PASQUALE R. (ed.); GOSWAMI, RAMASIS (ed.).
Characterization of Minerals, Metals, and Materials.
Cham, CZ, Switzerland: Springer Nature Switzerland AG,
2019.
p. 629-636.
(The Minerals, Metals & Materials Series).
DOI:
10.1007/978-3-030-05749-7_62.
Disponível em: http://repositorio.ipen.br/handle/123456789/29850. Acesso em: $DATA.
Esta referência é gerada automaticamente de acordo com as normas do estilo IPEN/SP (ABNT NBR 6023) e recomenda-se uma verificação final e ajustes caso necessário.
Como referenciar este item
-
MESQUITA, ANDERSON dos S.
; CAVALCANTE, IAN T.
; SILVA, LEONARDO G. de A. e
.
Electron beam effect on the thermal and mechanical properties analysis of DGEBA/EPDM compound.
In: LI, BOWEN (Ed.); LI, JIAN (Ed.); IKHMAYIES, SHADIA (Ed.); ZHANG, MINGMING (Ed.); KALAY, YUNUS E. (Ed.); CARPENTER, JOHN S. (Ed.); HWANG, JIANN-YANG (Ed.); MONTEIRO, SERGIO N. (Ed.); BAI, CHENGUANG (Ed.); ESCOBEDO-DIAZ, JUAN P. (Ed.); SPENA, PASQUALE R. (Ed.); GOSWAMI, RAMASIS (Ed.).
Characterization of Minerals, Metals, and Materials.
Cham, CZ, Switzerland: Springer Nature Switzerland AG,
2019.
p. 637-646,
(The Minerals, Metals & Materials Series).
DOI:
10.1007/978-3-030-05749-7_63
Abstract:
The aim of this work is to obtain, characterize and irradiate the
DGEBA/EPDM compound and compare their thermal and mechanical properties
with a non-irradiated DGEBA/EPDM compound. The DGEBA/EPDM compound
may be used to cover other materials such as polymers and protect them against high
thermal conditions and mechanical effort. The compounds have 0.0, 25.0 and 50.0
wt% of DGEBA. In addition, the compounds were irradiated at 30 and 60 kGy at
a dose rate 22.41 kGy/s. The thermal properties (DMA and TGA) and mechanical
analysis (tensile strength and elongation at break) were performed. In conclusion,
the irradiated DGEBA/EPDM compounds may be used for several applications due
to the improvement in their mechanical and thermal properties. Their properties are
satisfactory for application that requires stronger material.
Palavras-Chave:
epoxides;
ethylene propylene diene polymers;
thermodynamic properties;
electron beams
MESQUITA, ANDERSON dos S.; CAVALCANTE, IAN T.; SILVA, LEONARDO G. de A. e.
Electron beam effect on the thermal and mechanical properties analysis of DGEBA/EPDM compound.
In:
LI, BOWEN (ed.); LI, JIAN (ed.); IKHMAYIES, SHADIA (ed.); ZHANG, MINGMING (ed.); KALAY, YUNUS E. (ed.); CARPENTER, JOHN S. (ed.); HWANG, JIANN-YANG (ed.); MONTEIRO, SERGIO N. (ed.); BAI, CHENGUANG (ed.); ESCOBEDO-DIAZ, JUAN P. (ed.); SPENA, PASQUALE R. (ed.); GOSWAMI, RAMASIS (ed.).
Characterization of Minerals, Metals, and Materials.
Cham, CZ, Switzerland: Springer Nature Switzerland AG,
2019.
p. 637-646.
(The Minerals, Metals & Materials Series).
DOI:
10.1007/978-3-030-05749-7_63.
Disponível em: http://repositorio.ipen.br/handle/123456789/29851. Acesso em: $DATA.
Esta referência é gerada automaticamente de acordo com as normas do estilo IPEN/SP (ABNT NBR 6023) e recomenda-se uma verificação final e ajustes caso necessário.
Como referenciar este item
-
TATEI, TATIANE Y.
; FONTES, ERIC H.
; MOREIRA, RENAN P.
; DIAS, FRANCISCO V.; OLIVEIRA, RENE R.
; RANGARI, VIJAYA; MOURA, ESPERIDIANA A.B.
.
Improvement properties of polypropylene by graphene oxide incorporation.
In: LI, JIAN (Ed.); ZHANG, MINGMING (Ed.); LI, BOWEN (Ed.); MONTEIRO, SERGIO N. (Ed.); IKHMAYIES, SHADIA (Ed.); KALAY, YUNUS E. (Ed.); HWANG, JIANN-YANG (Ed.); ESCOBEDO-DIAZ, JUAN P. (Ed.); CARPENTER, JOHN S. (Ed.); BROWN, ANDREW D. (Ed.).
Characterization of Minerals, Metals, and Materials.
Cham, CZ, Switzerland: Springer Nature Switzerland AG,
2020.
p. 581-589,
(The Minerals, Metals & Materials Series).
DOI:
10.1007/978-3-030-36628-5_57
Abstract:
Due to the remarkable properties of graphene oxide (GO) and its possibility
of functionalization,GOhas been used in many applications such as nanocomposites.
GO nanosheets have been shown to improve the properties of the polypropylene
(PP) matrix, for instance, its strength, gas barrier, thermal, and electrical conductivity.
As PP has relatively low cost and varied applications, this work aims to study the
changes in its thermal, morphological, and mechanical properties, due to the incorporation
of GO in the PP matrix. GO was synthesized from graphite by a modified
Hummers method. The nanocomposites PP/GO with 0.1, 0.2, and 0.3 wt% of GO in
the PP matrix were obtained using a twin-screw extruder and an injection molding
machine via a melt blending process. The nanocomposites PP/GO were characterized
by FE-SEM and Izod impact test. In addition, the GO nanosheets were also
characterized by Raman spectroscopy, ATR-FTIR, FE-SEM, and XRD, therewith
correlation between properties was discussed.
Palavras-Chave:
graphene;
oxides;
polypropylene;
nanocomposites
TATEI, TATIANE Y.; FONTES, ERIC H.; MOREIRA, RENAN P.; DIAS, FRANCISCO V.; OLIVEIRA, RENE R.; RANGARI, VIJAYA; MOURA, ESPERIDIANA A.B.
Improvement properties of polypropylene by graphene oxide incorporation.
In:
LI, JIAN (ed.); ZHANG, MINGMING (ed.); LI, BOWEN (ed.); MONTEIRO, SERGIO N. (ed.); IKHMAYIES, SHADIA (ed.); KALAY, YUNUS E. (ed.); HWANG, JIANN-YANG (ed.); ESCOBEDO-DIAZ, JUAN P. (ed.); CARPENTER, JOHN S. (ed.); BROWN, ANDREW D. (ed.).
Characterization of Minerals, Metals, and Materials.
Cham, CZ, Switzerland: Springer Nature Switzerland AG,
2020.
p. 581-589.
(The Minerals, Metals & Materials Series).
DOI:
10.1007/978-3-030-36628-5_57.
Disponível em: http://repositorio.ipen.br/handle/123456789/31854. Acesso em: $DATA.
Esta referência é gerada automaticamente de acordo com as normas do estilo IPEN/SP (ABNT NBR 6023) e recomenda-se uma verificação final e ajustes caso necessário.
Como referenciar este item
-
MARCHINI, LEONARDO G.
; PARRA, DUCLERC F.
; RANGARI, VIJAYA K..
Incorporation of silver nanoparticles in zinc oxide matrix in Polyester Thermoplastic Elastomer (TPE-E) aiming antibacterial activity.
In: LI, BOWEN (Ed.); LI, JIAN (Ed.); IKHMAYIES, SHADIA (Ed.); ZHANG, MINGMING (Ed.); KALAY, YUNUS E. (Ed.); CARPENTER, JOHN S. (Ed.); HWANG, JIANN-YANG (Ed.); MONTEIRO, SERGIO N. (Ed.); BAI, CHENGUANG (Ed.); ESCOBEDO-DIAZ, JUAN P. (Ed.); SPENA, PASQUALE R. (Ed.); GOSWAMI, RAMASIS (Ed.).
Characterization of Minerals, Metals, and Materials.
Cham, CZ, Switzerland: Springer Nature Switzerland AG,
2019.
p. 79-88,
(The Minerals, Metals & Materials Series).
DOI:
10.1007/978-3-030-05749-7_9
Abstract:
The purpose of present study is to evaluate the antimicrobial potential of
Thermoplastic Polyester Elastomer (TPE-E) incorporated with zinc oxide added with
colloidal dispersion of metallic silver adsorbed on pyrogenic silica (AgNPs_ZnO).
A combination of single screw extruder and hot press technique was used to fabricate
these polymer nanocomposite films. These polymer nanocomposite films were prepared
by mechanical mixing of 1% (w/w) of oil, anti-oxidant 0.05% (w/w), TPE-E
granules 0.5% (w/w) and followed by single screw extruder to produce the pellets.
As-prepared pellets were further melted for films in hot press technique. Antimicrobial
activity was evaluated according to Japan Industrial Standard—JIS Z 2801
in TPE-E compounds against Staphylococcus aureus (S. aureus) and Escherichia
coli (E. coli). TPE-E samples containing additives 0.05 and 0.5% AgNPs_ZnO presented
75 and93%bactericidal reduction for Gram-negative bacteria Escherichia coli
(E. coli) and 76 and 92% bactericidal activity reduction for Gram-positive bacteria
Staphylococcus aureus (S. aureus), respectively.
Palavras-Chave:
silver;
nanoparticles;
antimicrobial agents;
thermoplastics;
polyesters;
elastomers;
zinc oxides
MARCHINI, LEONARDO G.; PARRA, DUCLERC F.; RANGARI, VIJAYA K.
Incorporation of silver nanoparticles in zinc oxide matrix in Polyester Thermoplastic Elastomer (TPE-E) aiming antibacterial activity.
In:
LI, BOWEN (ed.); LI, JIAN (ed.); IKHMAYIES, SHADIA (ed.); ZHANG, MINGMING (ed.); KALAY, YUNUS E. (ed.); CARPENTER, JOHN S. (ed.); HWANG, JIANN-YANG (ed.); MONTEIRO, SERGIO N. (ed.); BAI, CHENGUANG (ed.); ESCOBEDO-DIAZ, JUAN P. (ed.); SPENA, PASQUALE R. (ed.); GOSWAMI, RAMASIS (ed.).
Characterization of Minerals, Metals, and Materials.
Cham, CZ, Switzerland: Springer Nature Switzerland AG,
2019.
p. 79-88.
(The Minerals, Metals & Materials Series).
DOI:
10.1007/978-3-030-05749-7_9.
Disponível em: http://repositorio.ipen.br/handle/123456789/29840. Acesso em: $DATA.
Esta referência é gerada automaticamente de acordo com as normas do estilo IPEN/SP (ABNT NBR 6023) e recomenda-se uma verificação final e ajustes caso necessário.
Como referenciar este item
-
SANTANA, JULYANA
; SEIXAS, MARCUS V. de S.
; RANGARI, VIJAY; VALENZUELA-DIAZ, FRANCISCO; WIEBECK, HELIO; MOURA, ESPERIDIANA
.
Influence of electron-beam irradiation on the properties of LDPE/EDPM blend foams.
In: LI, BOWEN (Ed.); LI, JIAN (Ed.); IKHMAYIES, SHADIA (Ed.); ZHANG, MINGMING (Ed.); KALAY, YUNUS E. (Ed.); CARPENTER, JOHN S. (Ed.); HWANG, JIANN-YANG (Ed.); MONTEIRO, SERGIO N. (Ed.); FIRRAO, DONATO (Ed.); BROWN, ANDREW (Ed.); BAI, CHENGUANG (Ed.); PENG, ZHIWEI (Ed.); ESCOBEDO-DIAZ, JUAN P. (Ed.); GOSWAMI, RAMASIS (Ed.); KIM, JEONGGUK (Ed.).
Characterization of Minerals, Metals, and Materials. TMS.
Cham, CZ, Switzerland: Springer International Publishing AG,
2018.
p. 547-555,
(The Minerals, Metals & Materials Series).
DOI:
10.1007/978-3-319-72484-3_58
Abstract:
Closed-cell polyethylene (PE) foams have been extensively used in many applications such as packaging, transportation, sports, construction, and agriculture because of their variety of properties including light weight, chemical resistance, thermal and electrical insulation. The objective of this study is to evaluate the influence of electron-beam irradiation on the properties of LDPE/EPDM blend foams. The LDPE/EPDM blend (80/20 wt%) were prepared by melt extrusion, using a twin-screw extruder machine. The foam structure of LDPE/EPDM blends was obtained by melt extrusion process, using a special single screw for foaming with 1.5 wt% of foaming agent as blowing agent. The foam samples were irradiated by electron-beam at radiation dose of 25, 50, 75 and 100 kGy and submitted to heating in an oven at 100 °C. The specimen tests samples of irradiated and non-irradiated foams were submitted to mechanical tests, DSC, TG analysis and density measurement.
Palavras-Chave:
polyethylenes;
ethylene propylene diene polymers;
density;
irradiation;
tensile properties
SANTANA, JULYANA; SEIXAS, MARCUS V. de S.; RANGARI, VIJAY; VALENZUELA-DIAZ, FRANCISCO; WIEBECK, HELIO; MOURA, ESPERIDIANA.
Influence of electron-beam irradiation on the properties of LDPE/EDPM blend foams.
In:
LI, BOWEN (ed.); LI, JIAN (ed.); IKHMAYIES, SHADIA (ed.); ZHANG, MINGMING (ed.); KALAY, YUNUS E. (ed.); CARPENTER, JOHN S. (ed.); HWANG, JIANN-YANG (ed.); MONTEIRO, SERGIO N. (ed.); FIRRAO, DONATO (ed.); BROWN, ANDREW (ed.); BAI, CHENGUANG (ed.); PENG, ZHIWEI (ed.); ESCOBEDO-DIAZ, JUAN P. (ed.); GOSWAMI, RAMASIS (ed.); KIM, JEONGGUK (ed.).
Characterization of Minerals, Metals, and Materials. TMS.
Cham, CZ, Switzerland: Springer International Publishing AG,
2018.
p. 547-555.
(The Minerals, Metals & Materials Series).
DOI:
10.1007/978-3-319-72484-3_58.
Disponível em: http://repositorio.ipen.br/handle/123456789/28880. Acesso em: $DATA.
Esta referência é gerada automaticamente de acordo com as normas do estilo IPEN/SP (ABNT NBR 6023) e recomenda-se uma verificação final e ajustes caso necessário.
Como referenciar este item
-
SANTOS, BIANCA S.
; INACIO, ANDRE L.N.
; BARTOLOMEI, SUELLEN S.
; SILVA, TAISE B.S.
; CARMO, KARINA L.S.
; OLIVEIRA, RENE R.
; MOURA, ESPERIDIANA A.B.
.
Influence of the reduced graphene oxide incorporation on properties of acrylonitrile butadiene styrene (ABS).
In: LI, JIAN (Ed.); ZHANG, MINGMING (Ed.); LI, BOWEN (Ed.); MONTEIRO, SERGIO N. (Ed.); IKHMAYIES, SHADIA (Ed.); KALAY, YUNUS E. (Ed.); HWANG, JIANN-YANG (Ed.); ESCOBEDO-DIAZ, JUAN P. (Ed.); CARPENTER, JOHN S. (Ed.); BROWN, ANDREW D. (Ed.).
Characterization of Minerals, Metals, and Materials.
Cham, CZ, Switzerland: Springer Nature Switzerland AG,
2020.
p. 599-607,
(The Minerals, Metals & Materials Series).
DOI:
10.1007/978-3-030-36628-5_59
Abstract:
The purpose of this study was to evaluate the influence of incorporation of
the reduced graphene oxide on properties of acrylonitrile butadiene styrene (ABS).
The incorporation of 0.5 and 1.5 wt% of RGO into ABS matrix was carried out
by melting extrusion process using a twin-screw extruder and injection molding
machine. The properties of ABS/RGO nanocomposite samples were investigated
by tensile and impact Izod tests, FE-SEM, and XRD analysis. The results showed
that the incorporation of small amount of RGO into ABS matrix led to obtaining of
polymeric nanocomposite with superior mechanical properties when compared with
original properties of ABS matrix.
Palavras-Chave:
graphene;
oxides;
acrylonitrile;
butadiene;
styrene;
mechanical tests
SANTOS, BIANCA S.; INACIO, ANDRE L.N.; BARTOLOMEI, SUELLEN S.; SILVA, TAISE B.S.; CARMO, KARINA L.S.; OLIVEIRA, RENE R.; MOURA, ESPERIDIANA A.B.
Influence of the reduced graphene oxide incorporation on properties of acrylonitrile butadiene styrene (ABS).
In:
LI, JIAN (ed.); ZHANG, MINGMING (ed.); LI, BOWEN (ed.); MONTEIRO, SERGIO N. (ed.); IKHMAYIES, SHADIA (ed.); KALAY, YUNUS E. (ed.); HWANG, JIANN-YANG (ed.); ESCOBEDO-DIAZ, JUAN P. (ed.); CARPENTER, JOHN S. (ed.); BROWN, ANDREW D. (ed.).
Characterization of Minerals, Metals, and Materials.
Cham, CZ, Switzerland: Springer Nature Switzerland AG,
2020.
p. 599-607.
(The Minerals, Metals & Materials Series).
DOI:
10.1007/978-3-030-36628-5_59.
Disponível em: http://repositorio.ipen.br/handle/123456789/31855. Acesso em: $DATA.
Esta referência é gerada automaticamente de acordo com as normas do estilo IPEN/SP (ABNT NBR 6023) e recomenda-se uma verificação final e ajustes caso necessário.
Como referenciar este item
Buscar no repositório
Navegar
-
Todo o repositório
-
Esta coleção
Minha conta
Visualizar
A pesquisa no RD utiliza os recursos de busca da maioria das bases de dados. No entanto algumas dicas podem auxiliar para obter um resultado mais pertinente.
✔ É possível efetuar a busca de um autor ou um termo em todo o RD, por meio do
Buscar no Repositório
, isto é, o termo solicitado será localizado em qualquer campo do RD. No entanto esse tipo de pesquisa não é recomendada a não ser que se deseje um resultado amplo e generalizado.
✔ A pesquisa apresentará melhor resultado selecionando um dos filtros disponíveis em
Navegar
✔ Os filtros disponíveis em
Navegar
tais como: Coleções, Ano de publicação, Títulos, Assuntos, Autores, Revista, Tipo de publicação são autoexplicativos. O filtro,
Autores IPEN
apresenta uma relação com os autores vinculados ao IPEN; o
ID Autor IPEN
diz respeito ao número único de identificação de cada autor constante no RD e sob o qual estão agrupados todos os seus trabalhos independente das variáveis do seu nome;
Tipo de acesso
diz respeito à acessibilidade do documento, isto é , sujeito as leis de direitos autorais, ID RT apresenta a relação dos relatórios técnicos, restritos para consulta das comunidades indicadas.
A opção
Busca avançada
utiliza os conectores da lógica boleana, é o melhor recurso para combinar chaves de busca e obter documentos relevantes à sua pesquisa, utilize os filtros apresentados na caixa de seleção para refinar o resultado de busca. Pode-se adicionar vários filtros a uma mesma busca.
Exemplo:
Buscar os artigos apresentados em um evento internacional de 2015, sobre loss of coolant, do autor Maprelian.
Autor: Maprelian
Título: loss of coolant
Tipo de publicação: Texto completo de evento
Ano de publicação: 2015
✔ Para indexação dos documentos é utilizado o Thesaurus do INIS, especializado na área nuclear e utilizado em todos os países membros da
International Atomic Energy Agency – IAEA
, por esse motivo, utilize os termos de busca de assunto em inglês; isto não exclui a busca livre por palavras, apenas o resultado pode não ser tão relevante ou pertinente.
✔ 95% do RD apresenta o texto completo do documento com livre acesso, para aqueles que apresentam o
significa que e o documento está sujeito as leis de direitos autorais, solicita-se nesses casos contatar a Biblioteca do IPEN,
bibl@ipen.br
.
✔ Ao efetuar a busca por um autor o RD apresentará uma relação de todos os trabalhos depositados no RD. No lado direito da tela são apresentados os coautores com o número de trabalhos produzidos em conjunto bem como os assuntos abordados e os respectivos anos de publicação agrupados.
✔ O RD disponibiliza um quadro estatístico de produtividade, onde é possível visualizar o número dos trabalhos agrupados por tipo de coleção, a medida que estão sendo depositados no RD.
✔ Na página inicial nas referências são sinalizados todos os autores IPEN, ao clicar nesse símbolo
será aberta uma nova página correspondente à aquele autor – trata-se da página do pesquisador.
✔ Na página do pesquisador, é possível verificar, as variações do nome, a relação de todos os trabalhos com texto completo bem como um quadro resumo numérico; há links para o Currículo Lattes e o Google Acadêmico ( quando esse for informado).
ATENÇÃO!
ESTE TEXTO "AJUDA" ESTÁ SUJEITO A ATUALIZAÇÕES CONSTANTES, A MEDIDA QUE NOVAS FUNCIONALIDADES E RECURSOS DE BUSCA FOREM SENDO DESENVOLVIDOS PELAS EQUIPES DA BIBLIOTECA E DA INFORMÁTICA.
O gerenciamento do Repositório está a cargo da Biblioteca do IPEN. Constam neste RI, até o presente momento 20.950 itens que tanto podem ser artigos de periódicos ou de eventos nacionais e internacionais, dissertações e teses, livros, capítulo de livros e relatórios técnicos. Para participar do RI-IPEN é necessário que pelo menos um dos autores tenha vínculo acadêmico ou funcional com o Instituto. Nesta primeira etapa de funcionamento do RI, a coleta das publicações é realizada periodicamente pela equipe da Biblioteca do IPEN, extraindo os dados das bases internacionais tais como a Web of Science, Scopus, INIS, SciElo além de verificar o Currículo Lattes. O RI-IPEN apresenta também um aspecto inovador no seu funcionamento. Por meio de metadados específicos ele está vinculado ao sistema de gerenciamento das atividades do Plano Diretor anual do IPEN (SIGEPI). Com o objetivo de fornecer dados numéricos para a elaboração dos indicadores da Produção Cientifica Institucional, disponibiliza uma tabela estatística registrando em tempo real a inserção de novos itens. Foi criado um metadado que contém um número único para cada integrante da comunidade científica do IPEN. Esse metadado se transformou em um filtro que ao ser acionado apresenta todos os trabalhos de um determinado autor independente das variáveis na forma de citação do seu nome.
A elaboração do projeto do RI do IPEN foi iniciado em novembro de 2013, colocado em operação interna em julho de 2014 e disponibilizado na Internet em junho de 2015. Utiliza o software livre Dspace, desenvolvido pelo Massachusetts Institute of Technology (MIT). Para descrição dos metadados adota o padrão Dublin Core. É compatível com o Protocolo de Arquivos Abertos (OAI) permitindo interoperabilidade com repositórios de âmbito nacional e internacional.
1. Portaria IPEN-CNEN/SP nº 387, que estabeleceu os princípios que nortearam a criação do RDI,
clique aqui.
2. A experiência do Instituto de Pesquisas Energéticas e Nucleares (IPEN-CNEN/SP) na criação de um Repositório Digital Institucional – RDI,
clique aqui.
O Repositório Digital do IPEN é um equipamento institucional de acesso aberto, criado com o objetivo de reunir, preservar, disponibilizar e conferir maior visibilidade à Produção Científica publicada pelo Instituto, desde sua criação em 1956.
Operando, inicialmente como uma base de dados referencial o Repositório foi disponibilizado na atual plataforma, em junho de 2015. No Repositório está disponível o acesso ao conteúdo digital de artigos de periódicos, eventos, nacionais e internacionais, livros, capítulos, dissertações, teses e relatórios técnicos.
A elaboração do projeto do RI do IPEN foi iniciado em novembro de 2013, colocado em operação interna em julho de 2014 e disponibilizado na Internet em junho de 2015. Utiliza o software livre Dspace, desenvolvido pelo Massachusetts Institute of Technology (MIT). Para descrição dos metadados adota o padrão Dublin Core. É compatível com o Protocolo de Arquivos Abertos (OAI) permitindo interoperabilidade com repositórios de âmbito nacional e internacional.
O gerenciamento do Repositório está a cargo da Biblioteca do IPEN. Constam neste RI, até o presente momento 20.950 itens que tanto podem ser artigos de periódicos ou de eventos nacionais e internacionais, dissertações e teses, livros, capítulo de livros e relatórios técnicos. Para participar do RI-IPEN é necessário que pelo menos um dos autores tenha vínculo acadêmico ou funcional com o Instituto. Nesta primeira etapa de funcionamento do RI, a coleta das publicações é realizada periodicamente pela equipe da Biblioteca do IPEN, extraindo os dados das bases internacionais tais como a Web of Science, Scopus, INIS, SciElo além de verificar o Currículo Lattes. O RI-IPEN apresenta também um aspecto inovador no seu funcionamento. Por meio de metadados específicos ele está vinculado ao sistema de gerenciamento das atividades do Plano Diretor anual do IPEN (SIGEPI). Com o objetivo de fornecer dados numéricos para a elaboração dos indicadores da Produção Cientifica Institucional, disponibiliza uma tabela estatística registrando em tempo real a inserção de novos itens. Foi criado um metadado que contém um número único para cada integrante da comunidade científica do IPEN. Esse metadado se transformou em um filtro que ao ser acionado apresenta todos os trabalhos de um determinado autor independente das variáveis na forma de citação do seu nome.