JavaScript is disabled for your browser. Some features of this site may not work without it.
Navegação Livros - Capítulos por assunto "nanocomposites"
-
COSTA, ROBSON S.
; MOURA, ESPERIDIANA A.B.
.
A bibliometric analysis of the strategy and performance measurement of the polymer matrix nanomaterials development scenario globally, and the participation of Brazil.
In: LI, JIAN (Ed.); ZHANG, MINGMING (Ed.); LI, BOWEN (Ed.); MONTEIRO, SERGIO N. (Ed.); IKHMAYIES, SHADIA (Ed.); KALAY, YUNUS E. (Ed.); HWANG, JIANN-YANG (Ed.); ESCOBEDO-DIAZ, JUAN P. (Ed.); CARPENTER, JOHN S. (Ed.); BROWN, ANDREW D. (Ed.).
Characterization of Minerals, Metals, and Materials.
Cham, CZ, Switzerland: Springer Nature Switzerland AG,
2020.
p. 329-342,
(The Minerals, Metals & Materials Series).
DOI:
10.1007/978-3-030-36628-5_31
Abstract:
Extensive studies have been conducted worldwide on the strategy for the
development of nanomaterials. One of the known strategies for this has aroused
interest in the market is the incorporation of the nanoparticles, extracted from the
residues in thematrices of the polymers for the production of environmentally correct
nanocomposites. This work presents a survey of the scientific knowledge of nanomaterials
of the polymer matrix and a panoramic view of the evolution of these nanomaterials
are subject, in order to meet the criteria of sustainable development due to the
environmental concerns. This study also intends to use bibliometric tools to database
acquisition and analysis of bibliographic reviews for an evaluation of the scenarios
in the world on the development of polymeric nanomaterials based on three different
classes of polymeric nanocomposites: polymer/clay; polymer/graphene, and
polymer/nanocellulose nanocomposites.
Palavras-Chave:
statistical data;
nanomaterials;
nanocomposites;
scientific personnel;
knowledge management;
polymers
COSTA, ROBSON S.; MOURA, ESPERIDIANA A.B.
A bibliometric analysis of the strategy and performance measurement of the polymer matrix nanomaterials development scenario globally, and the participation of Brazil.
In:
LI, JIAN (ed.); ZHANG, MINGMING (ed.); LI, BOWEN (ed.); MONTEIRO, SERGIO N. (ed.); IKHMAYIES, SHADIA (ed.); KALAY, YUNUS E. (ed.); HWANG, JIANN-YANG (ed.); ESCOBEDO-DIAZ, JUAN P. (ed.); CARPENTER, JOHN S. (ed.); BROWN, ANDREW D. (ed.).
Characterization of Minerals, Metals, and Materials.
Cham, CZ, Switzerland: Springer Nature Switzerland AG,
2020.
p. 329-342.
(The Minerals, Metals & Materials Series).
DOI:
10.1007/978-3-030-36628-5_31.
Disponível em: http://repositorio.ipen.br/handle/123456789/31850. Acesso em: $DATA.
Esta referência é gerada automaticamente de acordo com as normas do estilo IPEN/SP (ABNT NBR 6023) e recomenda-se uma verificação final e ajustes caso necessário.
Como referenciar este item
-
MUNHOZ JUNIOR, ANTONIO H.; PACHECO, CAROLINE V.; MELO, HENRIQUE T.T.S.; PERES, RENATO M.; SILVA, LEONARDO G. de A. e
; MIRANDA, LEILA F. de; ROMERO FILHO, MARCOS.
Characterization of a composite of high-impact polystyrene, pseudoboehmite and graphene oxide.
In: LI, BOWEN (Ed.); LI, JIAN (Ed.); IKHMAYIES, SHADIA (Ed.); ZHANG, MINGMING (Ed.); KALAY, YUNUS E. (Ed.); CARPENTER, JOHN S. (Ed.); HWANG, JIANN-YANG (Ed.); MONTEIRO, SERGIO N. (Ed.); BAI, CHENGUANG (Ed.); ESCOBEDO-DIAZ, JUAN P. (Ed.); SPENA, PASQUALE R. (Ed.); GOSWAMI, RAMASIS (Ed.).
Characterization of Minerals, Metals, and Materials.
Cham, CZ, Switzerland: Springer Nature Switzerland AG,
2019.
p. 511-522,
(The Minerals, Metals & Materials Series).
DOI:
10.1007/978-3-030-05749-7_51
Abstract:
The application of a composite material of pseudoboehmite, polystyrene
and graphene oxide was studied. The present work is the synthesis and characterization
of high-impact polystyrene (HIPS) nanocomposite, with pseudoboehmite
(PSB) and graphene oxide. Pseudoboehmite particles with nanometric dimensions
were obtained by sol-gel process. The composites were characterized by mechanical
tests (tensile strength, flexural strength, Izod Impact, Shore D Hardness), thermal
(Flow index, temperature of thermal deflection under load-HDT, Vicat softening
temperature, differential tests thermal analyses and thermogravimetric analysis) and
morphologically by Scanning Electron Microscopy (SEM). The results obtained
were compared with HIPS matrix properties, without PSB and graphene oxide addition.
From the thermal analyzes, composite samples showed higher decomposition
temperatures compared to pure high-impact polystyrene especially in the thermogravimetric
analysis results, showing a considerable increase in the temperature at
which material decomposition begins (322 °C for pure high-impact polystyrene and
380 °C for the composite).
Palavras-Chave:
composite materials;
polystyrene;
graphene;
oxides;
nanocomposites;
aluminium compounds
MUNHOZ JUNIOR, ANTONIO H.; PACHECO, CAROLINE V.; MELO, HENRIQUE T.T.S.; PERES, RENATO M.; SILVA, LEONARDO G. de A. e; MIRANDA, LEILA F. de; ROMERO FILHO, MARCOS.
Characterization of a composite of high-impact polystyrene, pseudoboehmite and graphene oxide.
In:
LI, BOWEN (ed.); LI, JIAN (ed.); IKHMAYIES, SHADIA (ed.); ZHANG, MINGMING (ed.); KALAY, YUNUS E. (ed.); CARPENTER, JOHN S. (ed.); HWANG, JIANN-YANG (ed.); MONTEIRO, SERGIO N. (ed.); BAI, CHENGUANG (ed.); ESCOBEDO-DIAZ, JUAN P. (ed.); SPENA, PASQUALE R. (ed.); GOSWAMI, RAMASIS (ed.).
Characterization of Minerals, Metals, and Materials.
Cham, CZ, Switzerland: Springer Nature Switzerland AG,
2019.
p. 511-522.
(The Minerals, Metals & Materials Series).
DOI:
10.1007/978-3-030-05749-7_51.
Disponível em: http://repositorio.ipen.br/handle/123456789/29858. Acesso em: $DATA.
Esta referência é gerada automaticamente de acordo com as normas do estilo IPEN/SP (ABNT NBR 6023) e recomenda-se uma verificação final e ajustes caso necessário.
Como referenciar este item
-
MIRANDA, LEILA F. de; MUNHOZ JUNIOR, ANTONIO H.; MASSON, TEREZINHA J.; SILVA, LEONARDO G. de A. e
; FRIEHE, KARL.
Characterization of antistatic packaging based on PET/rGO.
In: LI, BOWEN (Ed.); LI, JIAN (Ed.); IKHMAYIES, SHADIA (Ed.); ZHANG, MINGMING (Ed.); KALAY, YUNUS E. (Ed.); CARPENTER, JOHN S. (Ed.); HWANG, JIANN-YANG (Ed.); MONTEIRO, SERGIO N. (Ed.); BAI, CHENGUANG (Ed.); ESCOBEDO-DIAZ, JUAN P. (Ed.); SPENA, PASQUALE R. (Ed.); GOSWAMI, RAMASIS (Ed.).
Characterization of Minerals, Metals, and Materials.
Cham, CZ, Switzerland: Springer Nature Switzerland AG,
2019.
p. 523-534,
(The Minerals, Metals & Materials Series).
DOI:
10.1007/978-3-030-05749-7_52
Abstract:
Package for electronic components is one that protects an electronic or
electrical device against electrostatic discharge. Traditionally, antistatic packages
are produced with polystyrene (PS) or polypropylene (PP) filled with carbon black.
Recently, studies have been carried out successfully for the application of polyethylene
terephthalate (PET) filled with carbon black. This work aimed to obtain and
characterize nanocomposites based on PET filled with reduced graphene oxide (rGO)
and compare its physicochemical properties with PET filled with carbon black and
PP filled with carbon black used in anti-static packaging. PET compounds containing
0.1; 0.3; 0.5 and 0.7wt% reduced graphene oxide were obtained by the modified
Hummers process from the graphite and reduced with hydrazine. The thermomechanical,
electrical and morphological properties of the obtained compounds were
determined. The results showed that the addition of reduced graphene oxide to PET
causes an increase in the melt flow index, also increase the tensile strength and electrical
conductivity. The addition of reduced graphene oxide promotes the decrease
in the hardness and thermal resistance of the obtained nanocomposites. Nanocomposites
based on PET containing 0.5wt% and 0.7wt% reduced graphene oxide can
be used in the handling, transport and storage of electronic components since their
mechanical, thermal and resistivity properties are satisfactory for this purpose.
Palavras-Chave:
nanocomposites;
polyethylene terephthalate;
graphene;
oxides;
packaging
MIRANDA, LEILA F. de; MUNHOZ JUNIOR, ANTONIO H.; MASSON, TEREZINHA J.; SILVA, LEONARDO G. de A. e; FRIEHE, KARL.
Characterization of antistatic packaging based on PET/rGO.
In:
LI, BOWEN (ed.); LI, JIAN (ed.); IKHMAYIES, SHADIA (ed.); ZHANG, MINGMING (ed.); KALAY, YUNUS E. (ed.); CARPENTER, JOHN S. (ed.); HWANG, JIANN-YANG (ed.); MONTEIRO, SERGIO N. (ed.); BAI, CHENGUANG (ed.); ESCOBEDO-DIAZ, JUAN P. (ed.); SPENA, PASQUALE R. (ed.); GOSWAMI, RAMASIS (ed.).
Characterization of Minerals, Metals, and Materials.
Cham, CZ, Switzerland: Springer Nature Switzerland AG,
2019.
p. 523-534.
(The Minerals, Metals & Materials Series).
DOI:
10.1007/978-3-030-05749-7_52.
Disponível em: http://repositorio.ipen.br/handle/123456789/29846. Acesso em: $DATA.
Esta referência é gerada automaticamente de acordo com as normas do estilo IPEN/SP (ABNT NBR 6023) e recomenda-se uma verificação final e ajustes caso necessário.
Como referenciar este item
-
SOARES, CARLOS
; SANTANA, JULYANA
; GUVEN, OLGUN; MOURA, ESPERIDIANA A.B.
.
A comparison between graphene oxide and reduced graphene oxide as reinforcement agents in polypropylene nanocomposite using irradiated polypropylene as compatibilizer.
In: LI, JIAN (Ed.); ZHANG, MINGMING (Ed.); LI, BOWEN (Ed.); MONTEIRO, SERGIO N. (Ed.); IKHMAYIES, SHADIA (Ed.); KALAY, YUNUS E. (Ed.); HWANG, JIANN-YANG (Ed.); ESCOBEDO-DIAZ, JUAN P. (Ed.); CARPENTER, JOHN S. (Ed.); BROWN, ANDREW D. (Ed.).
Characterization of Minerals, Metals, and Materials.
Cham, CZ, Switzerland: Springer Nature Switzerland AG,
2020.
p. 385-394,
(The Minerals, Metals & Materials Series).
DOI:
10.1007/978-3-030-36628-5_36
Abstract:
Graphene is thematerial with the bestmechanical resistance ever encountered.
Various types of studies have been carried out on possible applications. The use
as a reinforcement in nanocomposites has shown to be a promising field, but some
studies indicate that the graphene oxide (GO) and reduced graphene oxide (RGO)
have better results as reinforcement, due to the functional groups,which allowa better
adhesion with the matrix. This study analyzes the production of polypropylene (PP)
nanocomposite comparing the use of graphene oxide (GO) and reduced graphene
oxide (RGO) as fillers and irradiated polypropylene as a coupling agent.Atwin-screw
extruder and injection molding machine were used to produce the nanocomposite
PP reinforced with 0.2 wt% of GO and RGO by melt blending. The GO and RGO
were characterized byXRDanalysis.The nanocomposite sampleswere characterized
by XRD, SEM, TG, DSC and mechanical test.
Palavras-Chave:
graphene;
oxides;
polypropylene;
nanocomposites;
gamma radiation;
stresses;
tensile properties
SOARES, CARLOS; SANTANA, JULYANA; GUVEN, OLGUN; MOURA, ESPERIDIANA A.B.
A comparison between graphene oxide and reduced graphene oxide as reinforcement agents in polypropylene nanocomposite using irradiated polypropylene as compatibilizer.
In:
LI, JIAN (ed.); ZHANG, MINGMING (ed.); LI, BOWEN (ed.); MONTEIRO, SERGIO N. (ed.); IKHMAYIES, SHADIA (ed.); KALAY, YUNUS E. (ed.); HWANG, JIANN-YANG (ed.); ESCOBEDO-DIAZ, JUAN P. (ed.); CARPENTER, JOHN S. (ed.); BROWN, ANDREW D. (ed.).
Characterization of Minerals, Metals, and Materials.
Cham, CZ, Switzerland: Springer Nature Switzerland AG,
2020.
p. 385-394.
(The Minerals, Metals & Materials Series).
DOI:
10.1007/978-3-030-36628-5_36.
Disponível em: http://repositorio.ipen.br/handle/123456789/31851. Acesso em: $DATA.
Esta referência é gerada automaticamente de acordo com as normas do estilo IPEN/SP (ABNT NBR 6023) e recomenda-se uma verificação final e ajustes caso necessário.
Como referenciar este item
-
ANDRADE e SILVA, L.G.
; EVORA, M.C..
Development of radiation processing to functionalize carbon nanofiber to use in nanocomposite for industrial applications.
In: IAEA (Ed.).
Radiation curing composites for enhancing their features and utility in health care and industry.
Vienna: IAEA,
2015.
p. 28-44,
(IAEA-TECHDOC-1764).
Palavras-Chave:
nanostructures;
composite materials;
carbon;
graft polymers;
industry;
nanofibers;
nanocomposites
ANDRADE e SILVA, L.G.; EVORA, M.C.
Development of radiation processing to functionalize carbon nanofiber to use in nanocomposite for industrial applications.
In:
IAEA (ed.).
Radiation curing composites for enhancing their features and utility in health care and industry.
Vienna: IAEA,
2015.
p. 28-44.
(IAEA-TECHDOC-1764).
Disponível em: http://repositorio.ipen.br/handle/123456789/25838. Acesso em: $DATA.
Esta referência é gerada automaticamente de acordo com as normas do estilo IPEN/SP (ABNT NBR 6023) e recomenda-se uma verificação final e ajustes caso necessário.
Como referenciar este item
-
TATEI, TATIANE Y.
; FONTES, ERIC H.
; MOREIRA, RENAN P.
; DIAS, FRANCISCO V.; OLIVEIRA, RENE R.
; RANGARI, VIJAYA; MOURA, ESPERIDIANA A.B.
.
Improvement properties of polypropylene by graphene oxide incorporation.
In: LI, JIAN (Ed.); ZHANG, MINGMING (Ed.); LI, BOWEN (Ed.); MONTEIRO, SERGIO N. (Ed.); IKHMAYIES, SHADIA (Ed.); KALAY, YUNUS E. (Ed.); HWANG, JIANN-YANG (Ed.); ESCOBEDO-DIAZ, JUAN P. (Ed.); CARPENTER, JOHN S. (Ed.); BROWN, ANDREW D. (Ed.).
Characterization of Minerals, Metals, and Materials.
Cham, CZ, Switzerland: Springer Nature Switzerland AG,
2020.
p. 581-589,
(The Minerals, Metals & Materials Series).
DOI:
10.1007/978-3-030-36628-5_57
Abstract:
Due to the remarkable properties of graphene oxide (GO) and its possibility
of functionalization,GOhas been used in many applications such as nanocomposites.
GO nanosheets have been shown to improve the properties of the polypropylene
(PP) matrix, for instance, its strength, gas barrier, thermal, and electrical conductivity.
As PP has relatively low cost and varied applications, this work aims to study the
changes in its thermal, morphological, and mechanical properties, due to the incorporation
of GO in the PP matrix. GO was synthesized from graphite by a modified
Hummers method. The nanocomposites PP/GO with 0.1, 0.2, and 0.3 wt% of GO in
the PP matrix were obtained using a twin-screw extruder and an injection molding
machine via a melt blending process. The nanocomposites PP/GO were characterized
by FE-SEM and Izod impact test. In addition, the GO nanosheets were also
characterized by Raman spectroscopy, ATR-FTIR, FE-SEM, and XRD, therewith
correlation between properties was discussed.
Palavras-Chave:
graphene;
oxides;
polypropylene;
nanocomposites
TATEI, TATIANE Y.; FONTES, ERIC H.; MOREIRA, RENAN P.; DIAS, FRANCISCO V.; OLIVEIRA, RENE R.; RANGARI, VIJAYA; MOURA, ESPERIDIANA A.B.
Improvement properties of polypropylene by graphene oxide incorporation.
In:
LI, JIAN (ed.); ZHANG, MINGMING (ed.); LI, BOWEN (ed.); MONTEIRO, SERGIO N. (ed.); IKHMAYIES, SHADIA (ed.); KALAY, YUNUS E. (ed.); HWANG, JIANN-YANG (ed.); ESCOBEDO-DIAZ, JUAN P. (ed.); CARPENTER, JOHN S. (ed.); BROWN, ANDREW D. (ed.).
Characterization of Minerals, Metals, and Materials.
Cham, CZ, Switzerland: Springer Nature Switzerland AG,
2020.
p. 581-589.
(The Minerals, Metals & Materials Series).
DOI:
10.1007/978-3-030-36628-5_57.
Disponível em: http://repositorio.ipen.br/handle/123456789/31854. Acesso em: $DATA.
Esta referência é gerada automaticamente de acordo com as normas do estilo IPEN/SP (ABNT NBR 6023) e recomenda-se uma verificação final e ajustes caso necessário.
Como referenciar este item
-
FRANCISCO, DANAE L.
; PAIVA, LUCILENE B. de; ALDEIA, WAGNER; LUGAO, ADEMAR B.
; MOURA, ESPERIDIANA A.B.
.
Investigation on mechanical behaviors of polyamide 11 reinforced with halloysite nanotubes.
In: LI, BOWEN (Ed.); LI, JIAN (Ed.); IKHMAYIES, SHADIA (Ed.); ZHANG, MINGMING (Ed.); KALAY, YUNUS E. (Ed.); CARPENTER, JOHN S. (Ed.); HWANG, JIANN-YANG (Ed.); MONTEIRO, SERGIO N. (Ed.); BAI, CHENGUANG (Ed.); ESCOBEDO-DIAZ, JUAN P. (Ed.); SPENA, PASQUALE R. (Ed.); GOSWAMI, RAMASIS (Ed.).
Characterization of Minerals, Metals, and Materials.
Cham, CZ, Switzerland: Springer Nature Switzerland AG,
2019.
p. 693-701,
(The Minerals, Metals & Materials Series).
DOI:
10.1007/978-3-030-05749-7_69
Abstract:
The inorganic halloysite nanotubes (HNTs) are a promising type of natural
occurring filler for polymers. Its characteristics such as high aspect ratio (10–50),
small size, and high strength (elastic modulus—140 GPa) suggest that HNTs have
a potential use in high-performance polymer nanocomposites. Compared to other
nanoclays and nanosilica, the relatively low content of hydroxyl groups on their
surfaces makes HNTs relatively hydrophobic, although, sometimes, this is not sufficient
for guaranty a good interfacial adhesion in composite systems. In the present
study, halloysite nanotubes were incorporated in a polyamide 11 (PA11) matrix by
melt extrusion, using a twin-screw extruder and injection molding machine. The
neat PA11 and PA11/HNT nanocomposites were characterized by mechanical tests
(tensile, flexural and impact tests), and the correlation between properties were discussed.
Palavras-Chave:
polyamides;
nanostructures;
nanotubes;
nanocomposites;
mechanical properties;
thermoplastics;
inorganic polymers;
tensile properties
FRANCISCO, DANAE L.; PAIVA, LUCILENE B. de; ALDEIA, WAGNER; LUGAO, ADEMAR B.; MOURA, ESPERIDIANA A.B.
Investigation on mechanical behaviors of polyamide 11 reinforced with halloysite nanotubes.
In:
LI, BOWEN (ed.); LI, JIAN (ed.); IKHMAYIES, SHADIA (ed.); ZHANG, MINGMING (ed.); KALAY, YUNUS E. (ed.); CARPENTER, JOHN S. (ed.); HWANG, JIANN-YANG (ed.); MONTEIRO, SERGIO N. (ed.); BAI, CHENGUANG (ed.); ESCOBEDO-DIAZ, JUAN P. (ed.); SPENA, PASQUALE R. (ed.); GOSWAMI, RAMASIS (ed.).
Characterization of Minerals, Metals, and Materials.
Cham, CZ, Switzerland: Springer Nature Switzerland AG,
2019.
p. 693-701.
(The Minerals, Metals & Materials Series).
DOI:
10.1007/978-3-030-05749-7_69.
Disponível em: http://repositorio.ipen.br/handle/123456789/29852. Acesso em: $DATA.
Esta referência é gerada automaticamente de acordo com as normas do estilo IPEN/SP (ABNT NBR 6023) e recomenda-se uma verificação final e ajustes caso necessário.
Como referenciar este item
-
OLIANI, WASHINGTON L.
; PARRA, DUCLERC F.
; RANGARI, VIJAYA K.; LINCOPAN, NILTON; LUGAO, ADEMAR B.
.
Irradiation influence on the properties of HMS-Polypropylene Clay/AgNPs nanocomposites.
In: LI, BOWEN (Ed.); LI, JIAN (Ed.); IKHMAYIES, SHADIA (Ed.); ZHANG, MINGMING (Ed.); KALAY, YUNUS E. (Ed.); CARPENTER, JOHN S. (Ed.); HWANG, JIANN-YANG (Ed.); MONTEIRO, SERGIO N. (Ed.); FIRRAO, DONATO (Ed.); BROWN, ANDREW (Ed.); BAI, CHENGUANG (Ed.); PENG, ZHIWEI (Ed.); ESCOBEDO-DIAZ, JUAN P. (Ed.); GOSWAMI, RAMASIS (Ed.); KIM, JEONGGUK (Ed.).
Characterization of Minerals, Metals, and Materials. TMS.
Cham, CZ, Switzerland: Springer International Publishing AG,
2018.
p. 583-595,
(The Minerals, Metals & Materials Series).
DOI:
10.1007/978-3-319-72484-3_62
Abstract:
Due to its versatility and low cost, polypropylene (PP) is one of the most widely used polymers in the world, consequently in research and development of new products. The polypropylene modified was prepared by gamma irradiation in acetylene at 12.5 kGy dose, technical polymer also known as high-melt-strength-polypropylene (HMSPP). It was mixed with montmorillonite (MMT) clay and silver nanoparticles (AgNPs) for bactericide activity. HMS-Polypropylene-clay -silver nanocomposites were manufactured using twin-screw extruders. Those materials were prepared by a melt mixing process via twin screw extrusion with a wide range of processing conditions. The polypropylene nanocomposites (PPNC) surfaces were exposed to gamma-radiation (60Co) source in presence of nitrogen as inert atmosphere at 1; 3; 5; 10; 20 and 50 kGy doses for modified the surfaces in order to enhance biocide activity. The samples surfaces were characterized by Differential Scanning Calorimetry (DSC), X-ray Diffraction (XRD), Thermogravimetric Analysis (TGA), Scanning Electron Microscopy (SEM), Energy Dispersive Spectroscopy (EDX) and evaluated by determination of bactericide effects. The results indicate the formation of structures predominantly intercalated of HMSPP nanocomposite. Contact tests for antibacterial activity of the hybrid polymer were applied against Escherichia coli (Gram-negative) and Staphylococcus aureus (Gram-positive) bacteria. The irradiations on the samples surfaces were insufficient to promote activity on contact biocide tests.
Palavras-Chave:
nanocomposites;
polypropylene;
irradiation;
gamma radiation;
silver;
clays;
germicides;
montmorillonite
OLIANI, WASHINGTON L.; PARRA, DUCLERC F.; RANGARI, VIJAYA K.; LINCOPAN, NILTON; LUGAO, ADEMAR B.
Irradiation influence on the properties of HMS-Polypropylene Clay/AgNPs nanocomposites.
In:
LI, BOWEN (ed.); LI, JIAN (ed.); IKHMAYIES, SHADIA (ed.); ZHANG, MINGMING (ed.); KALAY, YUNUS E. (ed.); CARPENTER, JOHN S. (ed.); HWANG, JIANN-YANG (ed.); MONTEIRO, SERGIO N. (ed.); FIRRAO, DONATO (ed.); BROWN, ANDREW (ed.); BAI, CHENGUANG (ed.); PENG, ZHIWEI (ed.); ESCOBEDO-DIAZ, JUAN P. (ed.); GOSWAMI, RAMASIS (ed.); KIM, JEONGGUK (ed.).
Characterization of Minerals, Metals, and Materials. TMS.
Cham, CZ, Switzerland: Springer International Publishing AG,
2018.
p. 583-595.
(The Minerals, Metals & Materials Series).
DOI:
10.1007/978-3-319-72484-3_62.
Disponível em: http://repositorio.ipen.br/handle/123456789/28874. Acesso em: $DATA.
Esta referência é gerada automaticamente de acordo com as normas do estilo IPEN/SP (ABNT NBR 6023) e recomenda-se uma verificação final e ajustes caso necessário.
Como referenciar este item
-
ACHUSIM-UDENKO, AMAUCHE C.; RENATA, COIDA D.S.; VALENZUELA-DIAZ, FRANCISCO R.; ONYEDIKA, GERALD O.; MOURA, ESPERIDIANA A.B.
; OGWUEGBU, MARTIN C.; VALENZUELA-DIAZ, GRACA.
Preparation and characterization of clay exfoliation and vegetal fibre on properties of recycled low density polyethylene.
In: IKHMAYIES, SHADIA (Ed.); LI, BOWEN (Ed.); CARPENTER, JOHN S. (Ed.); LI, JLAN (Ed.); HWANG, JIANN-YANG (Ed.); MONTEIRO, SERGIO N. (Ed.); FIRRAO, DONATO (Ed.); ZHANG, MINGMING (Ed.); PENG, ZHIWEI (Ed.); ESCOBEDO-DIAZ, JUAN P. (Ed.); BAI, CHENGUANG (Ed.); KALAY, YUNUS E. (Ed.); GOSWAMI, RAMASIS (Ed.); KIM, JEONGGUK (Ed.).
Characterization of Minerals, Metals, and Materials.
Gewerbestrasse, Switzerland: Springer International Publishing AG.,
2017.
p. 429-437,
(The Minerals, Metals & Materials Series).
DOI:
10.1007/978-3-319-51382-9_47
Abstract:
This work aims to incorporate Mgbee clay, vegetal fibre ( Costus afer ) in recycled low density polyethylene (rLDPE). The incorporation of clay and vegetal fibre in rLDPE was carried out using a twin screw extruder machine and the nano composites were obtained. The nano composites were characterized by the Young’s modules test, tensile tests, bending test, XRD, SEM, DSC, and TG and other properties evaluated. The results of morphological and thermal properties showed a good interaction between the clay, and rLDPE as compared to neat rLDPE.
Palavras-Chave:
polyethylenes;
recycling;
nanocomposites;
fibers
ACHUSIM-UDENKO, AMAUCHE C.; RENATA, COIDA D.S.; VALENZUELA-DIAZ, FRANCISCO R.; ONYEDIKA, GERALD O.; MOURA, ESPERIDIANA A.B.; OGWUEGBU, MARTIN C.; VALENZUELA-DIAZ, GRACA.
Preparation and characterization of clay exfoliation and vegetal fibre on properties of recycled low density polyethylene.
In:
IKHMAYIES, SHADIA (ed.); LI, BOWEN (ed.); CARPENTER, JOHN S. (ed.); LI, JLAN (ed.); HWANG, JIANN-YANG (ed.); MONTEIRO, SERGIO N. (ed.); FIRRAO, DONATO (ed.); ZHANG, MINGMING (ed.); PENG, ZHIWEI (ed.); ESCOBEDO-DIAZ, JUAN P. (ed.); BAI, CHENGUANG (ed.); KALAY, YUNUS E. (ed.); GOSWAMI, RAMASIS (ed.); KIM, JEONGGUK (ed.).
Characterization of Minerals, Metals, and Materials.
Gewerbestrasse, Switzerland: Springer International Publishing AG.,
2017.
p. 429-437.
(The Minerals, Metals & Materials Series).
DOI:
10.1007/978-3-319-51382-9_47.
Disponível em: http://repositorio.ipen.br/handle/123456789/29221. Acesso em: $DATA.
Esta referência é gerada automaticamente de acordo com as normas do estilo IPEN/SP (ABNT NBR 6023) e recomenda-se uma verificação final e ajustes caso necessário.
Como referenciar este item
-
OLIANI, WASHINGTON L.
; KOMATSU, LUIZ G.H.
; LUGAO, ADEMAR B.
; RANGARI, VIJAYA K.; PARRA, DUCLERC F.
.
Processing and characterization of polyethylene-AgNPs films: biocide effect.
In: LI, JIAN (Ed.); ZHANG, MINGMING (Ed.); LI, BOWEN (Ed.); MONTEIRO, SERGIO N. (Ed.); IKHMAYIES, SHADIA (Ed.); KALAY, YUNUS E. (Ed.); HWANG, JIANN-YANG (Ed.); ESCOBEDO-DIAZ, JUAN P. (Ed.); CARPENTER, JOHN S. (Ed.); BROWN, ANDREW D. (Ed.).
Characterization of Minerals, Metals, and Materials.
Cham, CZ, Switzerland: Springer Nature Switzerland AG,
2020.
p. 679-688,
(The Minerals, Metals & Materials Series).
DOI:
10.1007/978-3-030-36628-5_67
Abstract:
Low-density-polyethylene (LDPE) and Linear-low-density-polyethylene
(LLDPE) nanocomposites films containing silver nitrate (AgNO3) and surfactant
oleic acid (AO) were manufactured via extrusion and subsequently characterised.
The films were evaluated by scanning electronmicroscopy (SEM), energy dispersive
spectroscopy (EDX), differential scanning calorimetry (DSC), transmission electron
microscopy (TEM), and infrared spectroscopy (FTIR). Further, the antibacterial
properties of the films were investigated against Escherichia coli (Gram-negative)
and Staphylococcus aureus (Gram-positive) bacteria.The results indicated that LDPE
nanocomposite films containing AgNPs have the potential to be used in antimicrobial
packaging for food applications.
Palavras-Chave:
nanocomposites;
polyethylenes;
silver nitrates;
oleic acid;
germicides
OLIANI, WASHINGTON L.; KOMATSU, LUIZ G.H.; LUGAO, ADEMAR B.; RANGARI, VIJAYA K.; PARRA, DUCLERC F.
Processing and characterization of polyethylene-AgNPs films: biocide effect.
In:
LI, JIAN (ed.); ZHANG, MINGMING (ed.); LI, BOWEN (ed.); MONTEIRO, SERGIO N. (ed.); IKHMAYIES, SHADIA (ed.); KALAY, YUNUS E. (ed.); HWANG, JIANN-YANG (ed.); ESCOBEDO-DIAZ, JUAN P. (ed.); CARPENTER, JOHN S. (ed.); BROWN, ANDREW D. (ed.).
Characterization of Minerals, Metals, and Materials.
Cham, CZ, Switzerland: Springer Nature Switzerland AG,
2020.
p. 679-688.
(The Minerals, Metals & Materials Series).
DOI:
10.1007/978-3-030-36628-5_67.
Disponível em: http://repositorio.ipen.br/handle/123456789/31859. Acesso em: $DATA.
Esta referência é gerada automaticamente de acordo com as normas do estilo IPEN/SP (ABNT NBR 6023) e recomenda-se uma verificação final e ajustes caso necessário.
Como referenciar este item
-
COSTA, ROBSON S.
; ARAUJO, DANIELLE G.
; ANDRADE, MARCIO S. de
; OLIVEIRA, RENE R.
; RANGARI, VIJAYA; MOURA, ESPERIDIANA A.B.
; DIAS, FRANCISCO V..
Production and characterization of PBAT reinforced with clay and graphene oxide nanosheets: a comparative study.
In: LI, JIAN (Ed.); ZHANG, MINGMING (Ed.); LI, BOWEN (Ed.); MONTEIRO, SERGIO N. (Ed.); IKHMAYIES, SHADIA (Ed.); KALAY, YUNUS E. (Ed.); HWANG, JIANN-YANG (Ed.); ESCOBEDO-DIAZ, JUAN P. (Ed.); CARPENTER, JOHN S. (Ed.); BROWN, ANDREW D. (Ed.).
Characterization of Minerals, Metals, and Materials.
Cham, CZ, Switzerland: Springer Nature Switzerland AG,
2020.
p. 689-699,
(The Minerals, Metals & Materials Series).
DOI:
10.1007/978-3-030-36628-5_68
Abstract:
The poly (butylene adipate-co-terephthalate) (PBAT), a biodegradable
polymer, is among the most promising materials to be considered as environmentally
friendly high performance biodegradable plastics. However, the mechanical
properties of PBAT are not the best for several applications. According to the literature,
the properties of the biodegradable polymer can be improved by addition
of a small amount of nanofillers, such as clay, silica, and graphene. The objective
of this study is to compare the effect of the addition of Cloisite clay and graphene
oxide (GO) on the properties of flexible films based on PBAT matrix. The composite
films based on PBAT with addition of Cloisite (2.0 wt%) and PBAT composite films
with addition of Cloisite and GO (0.1–0.2 wt%) were prepared by extrusion, using
a twin-screw extruder and a flat die single extruder. The effects of the addition of
Cloisite clay and graphene oxide on mechanical and thermal properties of films were
evaluated by mechanical and water absorption tests, FE-SEM, XRD, and Raman
analysis.
Palavras-Chave:
graphene;
oxide minerals;
nanocomposites;
polymers;
butenes;
biodegradation;
mechanical properties;
flexibility
COSTA, ROBSON S.; ARAUJO, DANIELLE G.; ANDRADE, MARCIO S. de; OLIVEIRA, RENE R.; RANGARI, VIJAYA; MOURA, ESPERIDIANA A.B.; DIAS, FRANCISCO V.
Production and characterization of PBAT reinforced with clay and graphene oxide nanosheets: a comparative study.
In:
LI, JIAN (ed.); ZHANG, MINGMING (ed.); LI, BOWEN (ed.); MONTEIRO, SERGIO N. (ed.); IKHMAYIES, SHADIA (ed.); KALAY, YUNUS E. (ed.); HWANG, JIANN-YANG (ed.); ESCOBEDO-DIAZ, JUAN P. (ed.); CARPENTER, JOHN S. (ed.); BROWN, ANDREW D. (ed.).
Characterization of Minerals, Metals, and Materials.
Cham, CZ, Switzerland: Springer Nature Switzerland AG,
2020.
p. 689-699.
(The Minerals, Metals & Materials Series).
DOI:
10.1007/978-3-030-36628-5_68.
Disponível em: http://repositorio.ipen.br/handle/123456789/31860. Acesso em: $DATA.
Esta referência é gerada automaticamente de acordo com as normas do estilo IPEN/SP (ABNT NBR 6023) e recomenda-se uma verificação final e ajustes caso necessário.
Como referenciar este item
-
OIDE, MARIANE Y.T.; SATANA, JULYANA
; WELLEN, RENATE; VALENZUELA-DIAZ, FRANCISCO; GUVEN, OLGUN; MOURA, ESPERIDIANA
.
The influence of clay reinforcement on the properties of recycled polymer foams.
In: LI, BOWEN (Ed.); LI, JIAN (Ed.); IKHMAYIES, SHADIA (Ed.); ZHANG, MINGMING (Ed.); KALAY, YUNUS E. (Ed.); CARPENTER, JOHN S. (Ed.); HWANG, JIANN-YANG (Ed.); MONTEIRO, SERGIO N. (Ed.); FIRRAO, DONATO (Ed.); BROWN, ANDREW (Ed.); BAI, CHENGUANG (Ed.); PENG, ZHIWEI (Ed.); ESCOBEDO-DIAZ, JUAN P. (Ed.); GOSWAMI, RAMASIS (Ed.); KIM, JEONGGUK (Ed.).
Characterization of Minerals, Metals, and Materials. TMS.
Cham, CZ, Switzerland: Springer International Publishing AG,
2018.
p. 703-712,
(The Minerals, Metals & Materials Series).
DOI:
10.1007/978-3-319-72484-3_75
Abstract:
Poly [(ethylene)-co-(vinyl acetate)] (EVA) is a thermoplastic copolymer composed of randomly distributed polyethylene and polyvinyl acetate sequences within the molecular chain. EVA combines toughness with excellent flexibility, impact and puncture resistance. Because of these properties, this material is largely used for foam production as padding in equipment for various sports and as a shock absorber in sport’s shoes. This work aims to study the influence of clay reinforcement on the performance of recycled polymer foams. The blend containing recycled HDPE (high density polyethylene) and recycled EVA (70/30 wt%, respectively) reinforced with 2 wt% of clays were prepared by melt extrusion, using a twin-screw extruder to obtain the composites. The composites and foaming agent were fed into a special single screw extruder for foaming. The samples of HDPE/EVA/Clay foams were characterized by tensile test, Field Emission Scanning Electron Microscopy (FE-SEM), Thermogravimetric Analysis (TG), Differential Scanning Calorimetry (DSC), X-ray Diffraction (XRD), density measurement and the correlation between the results was evaluated.
Palavras-Chave:
polyethylenes;
polymerization;
polyvinyls;
clays;
foams;
nanocomposites
OIDE, MARIANE Y.T.; SATANA, JULYANA; WELLEN, RENATE; VALENZUELA-DIAZ, FRANCISCO; GUVEN, OLGUN; MOURA, ESPERIDIANA.
The influence of clay reinforcement on the properties of recycled polymer foams.
In:
LI, BOWEN (ed.); LI, JIAN (ed.); IKHMAYIES, SHADIA (ed.); ZHANG, MINGMING (ed.); KALAY, YUNUS E. (ed.); CARPENTER, JOHN S. (ed.); HWANG, JIANN-YANG (ed.); MONTEIRO, SERGIO N. (ed.); FIRRAO, DONATO (ed.); BROWN, ANDREW (ed.); BAI, CHENGUANG (ed.); PENG, ZHIWEI (ed.); ESCOBEDO-DIAZ, JUAN P. (ed.); GOSWAMI, RAMASIS (ed.); KIM, JEONGGUK (ed.).
Characterization of Minerals, Metals, and Materials. TMS.
Cham, CZ, Switzerland: Springer International Publishing AG,
2018.
p. 703-712.
(The Minerals, Metals & Materials Series).
DOI:
10.1007/978-3-319-72484-3_75.
Disponível em: http://repositorio.ipen.br/handle/123456789/28877. Acesso em: $DATA.
Esta referência é gerada automaticamente de acordo com as normas do estilo IPEN/SP (ABNT NBR 6023) e recomenda-se uma verificação final e ajustes caso necessário.
Como referenciar este item
Buscar no repositório
Navegar
-
Todo o repositório
-
Esta coleção
Minha conta
Visualizar
A pesquisa no RD utiliza os recursos de busca da maioria das bases de dados. No entanto algumas dicas podem auxiliar para obter um resultado mais pertinente.
✔ É possível efetuar a busca de um autor ou um termo em todo o RD, por meio do
Buscar no Repositório
, isto é, o termo solicitado será localizado em qualquer campo do RD. No entanto esse tipo de pesquisa não é recomendada a não ser que se deseje um resultado amplo e generalizado.
✔ A pesquisa apresentará melhor resultado selecionando um dos filtros disponíveis em
Navegar
✔ Os filtros disponíveis em
Navegar
tais como: Coleções, Ano de publicação, Títulos, Assuntos, Autores, Revista, Tipo de publicação são autoexplicativos. O filtro,
Autores IPEN
apresenta uma relação com os autores vinculados ao IPEN; o
ID Autor IPEN
diz respeito ao número único de identificação de cada autor constante no RD e sob o qual estão agrupados todos os seus trabalhos independente das variáveis do seu nome;
Tipo de acesso
diz respeito à acessibilidade do documento, isto é , sujeito as leis de direitos autorais, ID RT apresenta a relação dos relatórios técnicos, restritos para consulta das comunidades indicadas.
A opção
Busca avançada
utiliza os conectores da lógica boleana, é o melhor recurso para combinar chaves de busca e obter documentos relevantes à sua pesquisa, utilize os filtros apresentados na caixa de seleção para refinar o resultado de busca. Pode-se adicionar vários filtros a uma mesma busca.
Exemplo:
Buscar os artigos apresentados em um evento internacional de 2015, sobre loss of coolant, do autor Maprelian.
Autor: Maprelian
Título: loss of coolant
Tipo de publicação: Texto completo de evento
Ano de publicação: 2015
✔ Para indexação dos documentos é utilizado o Thesaurus do INIS, especializado na área nuclear e utilizado em todos os países membros da
International Atomic Energy Agency – IAEA
, por esse motivo, utilize os termos de busca de assunto em inglês; isto não exclui a busca livre por palavras, apenas o resultado pode não ser tão relevante ou pertinente.
✔ 95% do RD apresenta o texto completo do documento com livre acesso, para aqueles que apresentam o significa que e o documento está sujeito as leis de direitos autorais, solicita-se nesses casos contatar a Biblioteca do IPEN,
bibl@ipen.br
.
✔ Ao efetuar a busca por um autor o RD apresentará uma relação de todos os trabalhos depositados no RD. No lado direito da tela são apresentados os coautores com o número de trabalhos produzidos em conjunto bem como os assuntos abordados e os respectivos anos de publicação agrupados.
✔ O RD disponibiliza um quadro estatístico de produtividade, onde é possível visualizar o número dos trabalhos agrupados por tipo de coleção, a medida que estão sendo depositados no RD.
✔ Na página inicial nas referências são sinalizados todos os autores IPEN, ao clicar nesse símbolo será aberta uma nova página correspondente à aquele autor – trata-se da página do pesquisador.
✔ Na página do pesquisador, é possível verificar, as variações do nome, a relação de todos os trabalhos com texto completo bem como um quadro resumo numérico; há links para o Currículo Lattes e o Google Acadêmico ( quando esse for informado).
ATENÇÃO!
ESTE TEXTO "AJUDA" ESTÁ SUJEITO A ATUALIZAÇÕES CONSTANTES, A MEDIDA QUE NOVAS FUNCIONALIDADES E RECURSOS DE BUSCA FOREM SENDO DESENVOLVIDOS PELAS EQUIPES DA BIBLIOTECA E DA INFORMÁTICA.
O gerenciamento do Repositório está a cargo da Biblioteca do IPEN. Constam neste RI, até o presente momento 20.950 itens que tanto podem ser artigos de periódicos ou de eventos nacionais e internacionais, dissertações e teses, livros, capítulo de livros e relatórios técnicos. Para participar do RI-IPEN é necessário que pelo menos um dos autores tenha vínculo acadêmico ou funcional com o Instituto. Nesta primeira etapa de funcionamento do RI, a coleta das publicações é realizada periodicamente pela equipe da Biblioteca do IPEN, extraindo os dados das bases internacionais tais como a Web of Science, Scopus, INIS, SciElo além de verificar o Currículo Lattes. O RI-IPEN apresenta também um aspecto inovador no seu funcionamento. Por meio de metadados específicos ele está vinculado ao sistema de gerenciamento das atividades do Plano Diretor anual do IPEN (SIGEPI). Com o objetivo de fornecer dados numéricos para a elaboração dos indicadores da Produção Cientifica Institucional, disponibiliza uma tabela estatística registrando em tempo real a inserção de novos itens. Foi criado um metadado que contém um número único para cada integrante da comunidade científica do IPEN. Esse metadado se transformou em um filtro que ao ser acionado apresenta todos os trabalhos de um determinado autor independente das variáveis na forma de citação do seu nome.
A elaboração do projeto do RI do IPEN foi iniciado em novembro de 2013, colocado em operação interna em julho de 2014 e disponibilizado na Internet em junho de 2015. Utiliza o software livre Dspace, desenvolvido pelo Massachusetts Institute of Technology (MIT). Para descrição dos metadados adota o padrão Dublin Core. É compatível com o Protocolo de Arquivos Abertos (OAI) permitindo interoperabilidade com repositórios de âmbito nacional e internacional.
1. Portaria IPEN-CNEN/SP nº 387, que estabeleceu os princípios que nortearam a criação do RDI,
clique aqui.
2. A experiência do Instituto de Pesquisas Energéticas e Nucleares (IPEN-CNEN/SP) na criação de um Repositório Digital Institucional – RDI,
clique aqui.
O Repositório Digital do IPEN é um equipamento institucional de acesso aberto, criado com o objetivo de reunir, preservar, disponibilizar e conferir maior visibilidade à Produção Científica publicada pelo Instituto, desde sua criação em 1956.
Operando, inicialmente como uma base de dados referencial o Repositório foi disponibilizado na atual plataforma, em junho de 2015. No Repositório está disponível o acesso ao conteúdo digital de artigos de periódicos, eventos, nacionais e internacionais, livros, capítulos, dissertações, teses e relatórios técnicos.
A elaboração do projeto do RI do IPEN foi iniciado em novembro de 2013, colocado em operação interna em julho de 2014 e disponibilizado na Internet em junho de 2015. Utiliza o software livre Dspace, desenvolvido pelo Massachusetts Institute of Technology (MIT). Para descrição dos metadados adota o padrão Dublin Core. É compatível com o Protocolo de Arquivos Abertos (OAI) permitindo interoperabilidade com repositórios de âmbito nacional e internacional.
O gerenciamento do Repositório está a cargo da Biblioteca do IPEN. Constam neste RI, até o presente momento 20.950 itens que tanto podem ser artigos de periódicos ou de eventos nacionais e internacionais, dissertações e teses, livros, capítulo de livros e relatórios técnicos. Para participar do RI-IPEN é necessário que pelo menos um dos autores tenha vínculo acadêmico ou funcional com o Instituto. Nesta primeira etapa de funcionamento do RI, a coleta das publicações é realizada periodicamente pela equipe da Biblioteca do IPEN, extraindo os dados das bases internacionais tais como a Web of Science, Scopus, INIS, SciElo além de verificar o Currículo Lattes. O RI-IPEN apresenta também um aspecto inovador no seu funcionamento. Por meio de metadados específicos ele está vinculado ao sistema de gerenciamento das atividades do Plano Diretor anual do IPEN (SIGEPI). Com o objetivo de fornecer dados numéricos para a elaboração dos indicadores da Produção Cientifica Institucional, disponibiliza uma tabela estatística registrando em tempo real a inserção de novos itens. Foi criado um metadado que contém um número único para cada integrante da comunidade científica do IPEN. Esse metadado se transformou em um filtro que ao ser acionado apresenta todos os trabalhos de um determinado autor independente das variáveis na forma de citação do seu nome.