Navegação Livros - Capítulos por assunto "polypropylene"

Classificar por: Ordenar: Resultados:

  • IPEN-DOC 25622

    MONTEIRO, ALEX S. ; BARREIRA, DAILI A.S. ; SILVA, JAQUELINE S. ; OLIVEIRA, RENE R. ; VALENZUELA-DIAZ, FRANCISCO R.; MOURA, ESPERIDIANA A.B. . An investigation of mechanical and thermal properties of polypropylene reinforced with different clays. In: LI, BOWEN (Ed.); LI, JIAN (Ed.); IKHMAYIES, SHADIA (Ed.); ZHANG, MINGMING (Ed.); KALAY, YUNUS E. (Ed.); CARPENTER, JOHN S. (Ed.); HWANG, JIANN-YANG (Ed.); MONTEIRO, SERGIO N. (Ed.); BAI, CHENGUANG (Ed.); ESCOBEDO-DIAZ, JUAN P. (Ed.); SPENA, PASQUALE R. (Ed.); GOSWAMI, RAMASIS (Ed.). Characterization of Minerals, Metals, and Materials. Cham, CZ, Switzerland: Springer Nature Switzerland AG, 2019. p. 453-463, (The Minerals, Metals & Materials Series). DOI: 10.1007/978-3-030-05749-7_45

    Abstract: Nowadays, environmental awareness and an increasing concern with the greenhouse effect have increased the interest in composite materials containing at least one of the components from natural origin. Natural clays seem to be a good alternative because they are environmentally acceptable, naturally abundant minerals, and due to their ability to intercalate and exfoliate in the polymer matrix led to an improvement in mechanical, thermal and barrier properties, compared to the neat polymer. This work presents an investigation of the effects of incorporation of two different clays on mechanical and thermal properties of polypropylene (PP) matrix. PP with 1.5–3.0 wt% of the Cloisite® (commercial clay), and light green clay (noncommercial Brazilian clay), was prepared by melt extrusion process. The neat PP and its nanocomposites were characterized by mechanical tests, SEM, DSC, TGA and XRD analyses. In addition, clay characterization by XRD has also been carried out.

    Palavras-Chave: polypropylene; clays; tensile properties; thermal gravimetric analysis

    Como referenciar este item
    Icon

  • IPEN-DOC 25878

    KOMATSU, L.G.H. ; ZAFALON, A.T. ; SANTOS, V.J. ; LINCOPAN, N.; RANGARI, V.K.; PARRA, D.F. . Application of natural nanoparticles in polymeric blend of HMSPP/SEBS for biocide activity. In: IKHMAYIES, SHADIA (Ed.); LI, JIAN (Ed.); VIEIRA, CARLOS M.F. (Ed.); MARGEM, JEAN I. (Ed.); BRAGA, FABIO de O. (Ed.). Green Materials Engineering. Cham, CZ, Switzerland: Springer Nature Switzerland AG, 2019. p. 79-87, (The Minerals, Metals & Materials Series). DOI: 10.1007/978-3-030-10383-5_9

    Abstract: The natural nanoparticles of CaCO3, from eggshell and CaCO3/Ag, were investigated as candidates for biocide nanoparticles in a blend of thermoplastic elastomer, styrene–ethylene/butadiene–styrene (SEBS), and polyolefin, high-meltstrength polypropylene (HMSPP). The nanoparticles with silver (Ag) were synthesized by metal precursor method, and before the application in the polymer matrix, the nanoparticles were analyzed on dynamic lighting scattering (DLS) and Raman spectroscopy. After DLS and Raman analyses, the nanoparticles were evaluated in biocide tests against P. aeruginosa and S. auerus. The aim of this investigation was the blending and the injection molding in dumbbell samples with the nanoparticles. The characterizations were carried out by differential scanning calorimetry (DSC), thermogravimetry analysis,mechanical tests, X-ray diffraction, Raman spectroscopy, scanning electronmicroscopy, and energy-dispersive scanning and biocide tests. Correlation between size and particle distribution on the polymerwas founded. However, samples at higher concentrations (>1 wt%) do not show biocide activity.

    Palavras-Chave: nanoparticles; calcium carbonates; antimicrobial agents; polypropylene; mixing; styrene; butenes; ethylene

    Como referenciar este item
    Icon

  • IPEN-DOC 25624

    MONTEIRO, ALEX S. ; BARREIRA, DAILI A.S. ; BARTOLOMEI, SUELLEN S. ; OLIVEIRA, RENE R. ; MOURA, ESPERIDIANA A.B. de . Comparative study of the use of rice husk ashes and graphite as fillers in polypropylene matrix composites. In: LI, BOWEN (Ed.); LI, JIAN (Ed.); IKHMAYIES, SHADIA (Ed.); ZHANG, MINGMING (Ed.); KALAY, YUNUS E. (Ed.); CARPENTER, JOHN S. (Ed.); HWANG, JIANN-YANG (Ed.); MONTEIRO, SERGIO N. (Ed.); BAI, CHENGUANG (Ed.); ESCOBEDO-DIAZ, JUAN P. (Ed.); SPENA, PASQUALE R. (Ed.); GOSWAMI, RAMASIS (Ed.). Characterization of Minerals, Metals, and Materials. Cham, CZ, Switzerland: Springer Nature Switzerland AG, 2019. p. 561-570, (The Minerals, Metals & Materials Series). DOI: 10.1007/978-3-030-05749-7_56

    Abstract: In recent years, carbonaceous materials have been widely studied for polymer composite applications due to its capability to improve the engineering properties of the polymeric matrix. Among various carbonaceous fillers, carbon nanotube, graphene, and graphite promise to be a suitable reinforcement of polymers. Rice husk ash (RHA), a large residue rich in carbon and silica produced by the burning of rice husk offers also an immense potential as a carbonaceous filler for polymer composites on account of its lowcost, lowdensity, high strength and elastic modulus, no health risks, and renewability. This work aims at studying the effects of RHA and graphite as fillers in polypropylene (PP) matrix composites. The composites PP/RHA and PP/graphite were produced by melting extrusion process. The materials obtained were subjected to mechanical tests, XRD, TG, and FEG-SEM analyses. Comparison studies between neat PP properties and its composites were carried out.

    Palavras-Chave: matrix materials; polypropylene; mechanical properties; thermodynamic properties; carbonaceous materials

    Como referenciar este item
    Icon

  • IPEN-DOC 27622

    SOARES, CARLOS ; SANTANA, JULYANA ; GUVEN, OLGUN; MOURA, ESPERIDIANA A.B. . A comparison between graphene oxide and reduced graphene oxide as reinforcement agents in polypropylene nanocomposite using irradiated polypropylene as compatibilizer. In: LI, JIAN (Ed.); ZHANG, MINGMING (Ed.); LI, BOWEN (Ed.); MONTEIRO, SERGIO N. (Ed.); IKHMAYIES, SHADIA (Ed.); KALAY, YUNUS E. (Ed.); HWANG, JIANN-YANG (Ed.); ESCOBEDO-DIAZ, JUAN P. (Ed.); CARPENTER, JOHN S. (Ed.); BROWN, ANDREW D. (Ed.). Characterization of Minerals, Metals, and Materials. Cham, CZ, Switzerland: Springer Nature Switzerland AG, 2020. p. 385-394, (The Minerals, Metals & Materials Series). DOI: 10.1007/978-3-030-36628-5_36

    Abstract: Graphene is thematerial with the bestmechanical resistance ever encountered. Various types of studies have been carried out on possible applications. The use as a reinforcement in nanocomposites has shown to be a promising field, but some studies indicate that the graphene oxide (GO) and reduced graphene oxide (RGO) have better results as reinforcement, due to the functional groups,which allowa better adhesion with the matrix. This study analyzes the production of polypropylene (PP) nanocomposite comparing the use of graphene oxide (GO) and reduced graphene oxide (RGO) as fillers and irradiated polypropylene as a coupling agent.Atwin-screw extruder and injection molding machine were used to produce the nanocomposite PP reinforced with 0.2 wt% of GO and RGO by melt blending. The GO and RGO were characterized byXRDanalysis.The nanocomposite sampleswere characterized by XRD, SEM, TG, DSC and mechanical test.

    Palavras-Chave: graphene; oxides; polypropylene; nanocomposites; gamma radiation; stresses; tensile properties

    Como referenciar este item
    Icon

  • IPEN-DOC 25626

    ROMANO, REBECA da S.G. ; OLIANI, WASHINGTON L. ; KUMAR, VIJAYA R.; PARRA, DUCLERC F. ; LUGAO, ADEMAR B. . Differences in properties of pro-degradant added PP and gamma-irradiated PP under environmental aging. In: LI, BOWEN (Ed.); LI, JIAN (Ed.); IKHMAYIES, SHADIA (Ed.); ZHANG, MINGMING (Ed.); KALAY, YUNUS E. (Ed.); CARPENTER, JOHN S. (Ed.); HWANG, JIANN-YANG (Ed.); MONTEIRO, SERGIO N. (Ed.); BAI, CHENGUANG (Ed.); ESCOBEDO-DIAZ, JUAN P. (Ed.); SPENA, PASQUALE R. (Ed.); GOSWAMI, RAMASIS (Ed.). Characterization of Minerals, Metals, and Materials. Cham, CZ, Switzerland: Springer Nature Switzerland AG, 2019. p. 591-603, (The Minerals, Metals & Materials Series). DOI: 10.1007/978-3-030-05749-7_59

    Abstract: Polypropylene (PP) is used for different sectors of the industry and in consequence produces a large amount of waste discarded at landfills causing serious environmental impacts. Controlled degradation of PP can be achieved by exposing the polymers to defined parameters, such as absorbed radiation dose, weather, oxygen, etc. The aim of this study was to compare two methods of accelerated degradation: gamma irradiation of PP 20 kGy and the incorporation of the commercial pro-degradant d2w® (1 wt%) in PP. Dumbbell samples were manufactured by the injection process and exposed to the environment aging for 90 days. Structural changes in PP macromolecules are created upon exposure to ionizing radiation such as main chain scission, crosslinking and peroxidation (in presence of air). Differential scanning calorimetry (DSC), thermogravimetric analysis (TG), scanning electron microscopy (SEM), energy-dispersive spectroscopy (EDX), X-ray fluorescence, Fourier-transformed infrared spectroscopy (FTIR) and mechanical tests characterized the samples. The samples previously irradiated, PP 20 kGy, after natural aging showed higher oxidation and presence of surface cracks than the PP d2w®. They also showed presence of carbonyl groups and decrease of melting temperature corroborating with oxo-degradation.

    Palavras-Chave: polypropylene; ionizing radiations; gamma radiation; residues; wastes; environment; aging; calorimetry

    Como referenciar este item
    Icon

  • IPEN-DOC 25627

    SALES, J.N. ; POVEDA, P.N.S. ; ORTIZ, A. ; VALENZUELA-DIAZ, F.R.; SILVA, L.A. . Effect study of the incorporation of the Green Lake clay in the polypropylene homopolymer properties. In: LI, BOWEN (Ed.); LI, JIAN (Ed.); IKHMAYIES, SHADIA (Ed.); ZHANG, MINGMING (Ed.); KALAY, YUNUS E. (Ed.); CARPENTER, JOHN S. (Ed.); HWANG, JIANN-YANG (Ed.); MONTEIRO, SERGIO N. (Ed.); BAI, CHENGUANG (Ed.); ESCOBEDO-DIAZ, JUAN P. (Ed.); SPENA, PASQUALE R. (Ed.); GOSWAMI, RAMASIS (Ed.). Characterization of Minerals, Metals, and Materials. Cham, CZ, Switzerland: Springer Nature Switzerland AG, 2019. p. 629-636, (The Minerals, Metals & Materials Series). DOI: 10.1007/978-3-030-05749-7_62

    Abstract: The advancement of technology has demanded the development of materials with increasingly lighter and more resistant properties. The development of nanocomposites first started in the mid-80s and contributed for obtaining materials with excellent properties. In this work, Green Lake clay was organophilized and incorporated into a commercial homopolymer polypropylene. The efficiency of organophilization was confirmed by water swelling analysis and, later, by Xray diffraction (XRD) analysis. Composites at 0.5, 1.0 and 2% by weight of clay/polypropylene were prepared by double screw extrusion. The properties of the composite were evaluated by means of Charpy impact resistance, tensile strength at rupture, thermogravimetric analysis (TGA). Crystallinity index was determined by differential scanning calorimetry (DSC). The organophilization processwas efficient, the thermogravimetric analysis showed that there was no decrease in the thermal stability of the composites when compared to pure polypropylene, and the results of the Charpy impact resistance were equivalent when compared to the commercial nucleant composites.

    Palavras-Chave: clays; crystal structure; charpy test; polypropylene; polymers

    Como referenciar este item
    Icon

  • IPEN-DOC 24234

    ROMANO, REBECA S.G. ; OLIANI, WASHINGTON L. ; PARRA, DUCLERC F. ; LUGAO, ADEMAR B. . Effects of environmental aging in polypropylene obtained by injection molding. In: MAAZOUZ, ABDERRAHIM (Ed.). INTERNATIONAL CONFERENCE OF THE POLYMER PROCESSING SOCIETY, 32nd. Melville, NY: AIP Publishing, 2017. p. 140001-1 - 140001-5, (AIP Conference Proceedings 1914).

    Notas de conteúdo: Conference date: July 25-29, 2016. Location: Lyon, France

    Abstract: UV light, heat, and pollutants can interact with Polypropylene (PP) molecules, mainly with the tertiary carbon producing free radicals which can react with oxygen producing changes in its properties. PP has outstanding chemical and physical properties, and a good processability at very low market price. In addition PP is extensively used for manufacturing various kinds of products, however due to its large scale consumption a lot of waste is generated at the end of their life cycle to the environment with low rate degradation. This study has the objective of comparing the environmental exposure of PP (spheres) neat and PP (spheres) irradiated with 20 kGy. Dumbbell samples were manufactured by injection molding and exposed to the environment during 90 days. Another one set was exposed to gamma irradiation at 20 kGy total dose and exposed at the same conditions. The samples were characterized by Mechanical Testing, Fourier Transform Infrared Spectroscopy (FTIR), Scanning Electron Microscopy (SEM), and Differential Scanning Calorimetry (DSC). The dumbbell samples PP 20 kGy, after environmental aging, showed oxidation with presence of surface cracks more intensely than the PP spheres neat.

    Palavras-Chave: gamma radiation; polypropylene; environmental exposure; environment; aging

    Como referenciar este item
    Icon

  • IPEN-DOC 27625

    TATEI, TATIANE Y. ; FONTES, ERIC H. ; MOREIRA, RENAN P. ; DIAS, FRANCISCO V.; OLIVEIRA, RENE R. ; RANGARI, VIJAYA; MOURA, ESPERIDIANA A.B. . Improvement properties of polypropylene by graphene oxide incorporation. In: LI, JIAN (Ed.); ZHANG, MINGMING (Ed.); LI, BOWEN (Ed.); MONTEIRO, SERGIO N. (Ed.); IKHMAYIES, SHADIA (Ed.); KALAY, YUNUS E. (Ed.); HWANG, JIANN-YANG (Ed.); ESCOBEDO-DIAZ, JUAN P. (Ed.); CARPENTER, JOHN S. (Ed.); BROWN, ANDREW D. (Ed.). Characterization of Minerals, Metals, and Materials. Cham, CZ, Switzerland: Springer Nature Switzerland AG, 2020. p. 581-589, (The Minerals, Metals & Materials Series). DOI: 10.1007/978-3-030-36628-5_57

    Abstract: Due to the remarkable properties of graphene oxide (GO) and its possibility of functionalization,GOhas been used in many applications such as nanocomposites. GO nanosheets have been shown to improve the properties of the polypropylene (PP) matrix, for instance, its strength, gas barrier, thermal, and electrical conductivity. As PP has relatively low cost and varied applications, this work aims to study the changes in its thermal, morphological, and mechanical properties, due to the incorporation of GO in the PP matrix. GO was synthesized from graphite by a modified Hummers method. The nanocomposites PP/GO with 0.1, 0.2, and 0.3 wt% of GO in the PP matrix were obtained using a twin-screw extruder and an injection molding machine via a melt blending process. The nanocomposites PP/GO were characterized by FE-SEM and Izod impact test. In addition, the GO nanosheets were also characterized by Raman spectroscopy, ATR-FTIR, FE-SEM, and XRD, therewith correlation between properties was discussed.

    Palavras-Chave: graphene; oxides; polypropylene; nanocomposites

    Como referenciar este item
    Icon

  • IPEN-DOC 24658

    OLIANI, WASHINGTON L. ; PARRA, DUCLERC F. ; RANGARI, VIJAYA K.; LINCOPAN, NILTON; LUGAO, ADEMAR B. . Irradiation influence on the properties of HMS-Polypropylene Clay/AgNPs nanocomposites. In: LI, BOWEN (Ed.); LI, JIAN (Ed.); IKHMAYIES, SHADIA (Ed.); ZHANG, MINGMING (Ed.); KALAY, YUNUS E. (Ed.); CARPENTER, JOHN S. (Ed.); HWANG, JIANN-YANG (Ed.); MONTEIRO, SERGIO N. (Ed.); FIRRAO, DONATO (Ed.); BROWN, ANDREW (Ed.); BAI, CHENGUANG (Ed.); PENG, ZHIWEI (Ed.); ESCOBEDO-DIAZ, JUAN P. (Ed.); GOSWAMI, RAMASIS (Ed.); KIM, JEONGGUK (Ed.). Characterization of Minerals, Metals, and Materials. TMS. Cham, CZ, Switzerland: Springer International Publishing AG, 2018. p. 583-595, (The Minerals, Metals & Materials Series). DOI: 10.1007/978-3-319-72484-3_62

    Abstract: Due to its versatility and low cost, polypropylene (PP) is one of the most widely used polymers in the world, consequently in research and development of new products. The polypropylene modified was prepared by gamma irradiation in acetylene at 12.5 kGy dose, technical polymer also known as high-melt-strength-polypropylene (HMSPP). It was mixed with montmorillonite (MMT) clay and silver nanoparticles (AgNPs) for bactericide activity. HMS-Polypropylene-clay -silver nanocomposites were manufactured using twin-screw extruders. Those materials were prepared by a melt mixing process via twin screw extrusion with a wide range of processing conditions. The polypropylene nanocomposites (PPNC) surfaces were exposed to gamma-radiation (60Co) source in presence of nitrogen as inert atmosphere at 1; 3; 5; 10; 20 and 50 kGy doses for modified the surfaces in order to enhance biocide activity. The samples surfaces were characterized by Differential Scanning Calorimetry (DSC), X-ray Diffraction (XRD), Thermogravimetric Analysis (TGA), Scanning Electron Microscopy (SEM), Energy Dispersive Spectroscopy (EDX) and evaluated by determination of bactericide effects. The results indicate the formation of structures predominantly intercalated of HMSPP nanocomposite. Contact tests for antibacterial activity of the hybrid polymer were applied against Escherichia coli (Gram-negative) and Staphylococcus aureus (Gram-positive) bacteria. The irradiations on the samples surfaces were insufficient to promote activity on contact biocide tests.

    Palavras-Chave: nanocomposites; polypropylene; irradiation; gamma radiation; silver; clays; germicides; montmorillonite

    Como referenciar este item
    Icon

  • IPEN-DOC 25630

    CORREIA, SABRINA A.; CRUZ, PEDRO V. ; RODRIGUES, TASSON C.; MONTEIRO, ALEX ; DIAZ, FRANCISCO R.V.; MOURA, ESPERIDIANA A.B. . Production and characterization of a hybrid composite of polypropylene reinforced with piassava (Attalea funifera Martius) fiber and light green clay. In: LI, BOWEN (Ed.); LI, JIAN (Ed.); IKHMAYIES, SHADIA (Ed.); ZHANG, MINGMING (Ed.); KALAY, YUNUS E. (Ed.); CARPENTER, JOHN S. (Ed.); HWANG, JIANN-YANG (Ed.); MONTEIRO, SERGIO N. (Ed.); BAI, CHENGUANG (Ed.); ESCOBEDO-DIAZ, JUAN P. (Ed.); SPENA, PASQUALE R. (Ed.); GOSWAMI, RAMASIS (Ed.). Characterization of Minerals, Metals, and Materials. Cham, CZ, Switzerland: Springer Nature Switzerland AG, 2019. p. 735-746, (The Minerals, Metals & Materials Series). DOI: 10.1007/978-3-030-05749-7_74

    Abstract: Waste materials have been frequently used as reinforcing materials, to obtain a composite with better properties. Piassava palm is native to the state of Bahia (Brazil) and its fiber, piassava fiber (PF) is awaste material frequently used for industrial and domestic brooms, industrial brushes, carpets, and roofs. The light green clay (LGC) is a natural smectite Brazilian clay from the state of Paraiba. This work aims to produce and evaluate the advantages of this new product achieved by the inclusion of these two natural materials into polypropylene (PP) matrix. A melting extrusion process, using a twin-screw extruder and injection molding machine was used to obtain PP/LGC (97/3 wt%), PP/PF (90/10 wt%) and PP/LGC/PF (87/3/10 wt%) composites. The materials were characterized by mechanical tests, TG, DSC, SEM, and XRD analysis.

    Palavras-Chave: polypropylene; fibers; composite materials; clays

    Como referenciar este item
    Icon

  • IPEN-DOC 24660

    POVEDA, PATRICIA N.S. ; MOLARI, JULIANA A.; BRUNELLI, DEBORAH D.; SILVA, LEONARDO G.A. e . Study of different process additives applied to polypropylene. In: LI, BOWEN (Ed.); LI, JIAN (Ed.); IKHMAYIES, SHADIA (Ed.); ZHANG, MINGMING (Ed.); KALAY, YUNUS E. (Ed.); CARPENTER, JOHN S. (Ed.); HWANG, JIANN-YANG (Ed.); MONTEIRO, SERGIO N. (Ed.); FIRRAO, DONATO (Ed.); BROWN, ANDREW (Ed.); BAI, CHENGUANG (Ed.); PENG, ZHIWEI (Ed.); ESCOBEDO-DIAZ, JUAN P. (Ed.); GOSWAMI, RAMASIS (Ed.); KIM, JEONGGUK (Ed.). Characterization of Minerals, Metals, and Materials. TMS. Cham, CZ, Switzerland: Springer International Publishing AG, 2018. p. 661-667, (The Minerals, Metals & Materials Series). DOI: 10.1007/978-3-319-72484-3_70

    Abstract: There are several additives aimed on improving the processing characteristics as well as mechanical properties of the plastic materials. Being polypropylene is one of the main polymers used in the plastic processing industry due to its easy processability and application versatility, was chosen as the base resin for this study. Additives can aid the processing of polypropylene, either by promoting a better slip between the chains (lubricants), or by contributing to nucleation and crystallinity (nucleating). In this study, the raw materials copolymer polypropylene, lubricant (internal and external action), organic nucleating agent (metallic salt) and inorganic nucleating agent (metallic oxide) were considered. Mechanical tensile tests, Charpy impact and spiral flow to verify melt index were performed to characterize the samples with additives and standard (copolymer polypropylene). The interference of these additives with polymeric matrix was observed.

    Palavras-Chave: polypropylene; plastics; lubricants; additives; nucleation; crystallization

    Como referenciar este item
    Icon

  • IPEN-DOC 25633

    POVEDA, PATRICIA N.S. ; SILVA, LEONARDO G.A. e . Study of the influence of organic peroxide and elastomeric modifier in the mechanical and flow properties of the recycled polypropylene. In: LI, BOWEN (Ed.); LI, JIAN (Ed.); IKHMAYIES, SHADIA (Ed.); ZHANG, MINGMING (Ed.); KALAY, YUNUS E. (Ed.); CARPENTER, JOHN S. (Ed.); HWANG, JIANN-YANG (Ed.); MONTEIRO, SERGIO N. (Ed.); BAI, CHENGUANG (Ed.); ESCOBEDO-DIAZ, JUAN P. (Ed.); SPENA, PASQUALE R. (Ed.); GOSWAMI, RAMASIS (Ed.). Characterization of Minerals, Metals, and Materials. Cham, CZ, Switzerland: Springer Nature Switzerland AG, 2019. p. 787-792, (The Minerals, Metals & Materials Series). DOI: 10.1007/978-3-030-05749-7_79

    Abstract: Plastics have been replacing other traditional materials such as wood, metal and glass over the past decades due to its versatility in properties, processability, and cost. Polypropylene can be highlighted as one of the main thermoplastics used in industry since it presents properties suitable for various applications, combining density, cost, availability, and ease of molding. By considering the mechanical recycling of post-consumer or post-industrial material, difficulty in flowability is observed, which demands modification to promote processability. This work used the traditional solution for flow modification (peroxide) and elastomeric modifier to evaluate the impact of these additives on the mechanical and flow properties of recycled polypropylene by tensile strength, melt index and spiral flow analyses. Although the modified sample with organic peroxide had a higher melt flow index, the mechanical resistance was lower than the elastomeric modifier, which showed good performance in the material flow during processing according to spiral flow analysis.

    Palavras-Chave: polypropylene; elastomers; peroxides; modifications; polymers

    Como referenciar este item
    Icon

A pesquisa no RD utiliza os recursos de busca da maioria das bases de dados. No entanto algumas dicas podem auxiliar para obter um resultado mais pertinente.

✔ É possível efetuar a busca de um autor ou um termo em todo o RD, por meio do Buscar no Repositório , isto é, o termo solicitado será localizado em qualquer campo do RD. No entanto esse tipo de pesquisa não é recomendada a não ser que se deseje um resultado amplo e generalizado.

✔ A pesquisa apresentará melhor resultado selecionando um dos filtros disponíveis em Navegar

✔ Os filtros disponíveis em Navegar tais como: Coleções, Ano de publicação, Títulos, Assuntos, Autores, Revista, Tipo de publicação são autoexplicativos. O filtro, Autores IPEN apresenta uma relação com os autores vinculados ao IPEN; o ID Autor IPEN diz respeito ao número único de identificação de cada autor constante no RD e sob o qual estão agrupados todos os seus trabalhos independente das variáveis do seu nome; Tipo de acesso diz respeito à acessibilidade do documento, isto é , sujeito as leis de direitos autorais, ID RT apresenta a relação dos relatórios técnicos, restritos para consulta das comunidades indicadas.

A opção Busca avançada utiliza os conectores da lógica boleana, é o melhor recurso para combinar chaves de busca e obter documentos relevantes à sua pesquisa, utilize os filtros apresentados na caixa de seleção para refinar o resultado de busca. Pode-se adicionar vários filtros a uma mesma busca.

Exemplo:

Buscar os artigos apresentados em um evento internacional de 2015, sobre loss of coolant, do autor Maprelian.

Autor: Maprelian

Título: loss of coolant

Tipo de publicação: Texto completo de evento

Ano de publicação: 2015

✔ Para indexação dos documentos é utilizado o Thesaurus do INIS, especializado na área nuclear e utilizado em todos os países membros da International Atomic Energy Agency – IAEA , por esse motivo, utilize os termos de busca de assunto em inglês; isto não exclui a busca livre por palavras, apenas o resultado pode não ser tão relevante ou pertinente.

✔ 95% do RD apresenta o texto completo do documento com livre acesso, para aqueles que apresentam o significa que e o documento está sujeito as leis de direitos autorais, solicita-se nesses casos contatar a Biblioteca do IPEN, bibl@ipen.br .

✔ Ao efetuar a busca por um autor o RD apresentará uma relação de todos os trabalhos depositados no RD. No lado direito da tela são apresentados os coautores com o número de trabalhos produzidos em conjunto bem como os assuntos abordados e os respectivos anos de publicação agrupados.

✔ O RD disponibiliza um quadro estatístico de produtividade, onde é possível visualizar o número dos trabalhos agrupados por tipo de coleção, a medida que estão sendo depositados no RD.

✔ Na página inicial nas referências são sinalizados todos os autores IPEN, ao clicar nesse símbolo será aberta uma nova página correspondente à aquele autor – trata-se da página do pesquisador.

✔ Na página do pesquisador, é possível verificar, as variações do nome, a relação de todos os trabalhos com texto completo bem como um quadro resumo numérico; há links para o Currículo Lattes e o Google Acadêmico ( quando esse for informado).

ATENÇÃO!

ESTE TEXTO "AJUDA" ESTÁ SUJEITO A ATUALIZAÇÕES CONSTANTES, A MEDIDA QUE NOVAS FUNCIONALIDADES E RECURSOS DE BUSCA FOREM SENDO DESENVOLVIDOS PELAS EQUIPES DA BIBLIOTECA E DA INFORMÁTICA.

O gerenciamento do Repositório está a cargo da Biblioteca do IPEN. Constam neste RI, até o presente momento 20.950 itens que tanto podem ser artigos de periódicos ou de eventos nacionais e internacionais, dissertações e teses, livros, capítulo de livros e relatórios técnicos. Para participar do RI-IPEN é necessário que pelo menos um dos autores tenha vínculo acadêmico ou funcional com o Instituto. Nesta primeira etapa de funcionamento do RI, a coleta das publicações é realizada periodicamente pela equipe da Biblioteca do IPEN, extraindo os dados das bases internacionais tais como a Web of Science, Scopus, INIS, SciElo além de verificar o Currículo Lattes. O RI-IPEN apresenta também um aspecto inovador no seu funcionamento. Por meio de metadados específicos ele está vinculado ao sistema de gerenciamento das atividades do Plano Diretor anual do IPEN (SIGEPI). Com o objetivo de fornecer dados numéricos para a elaboração dos indicadores da Produção Cientifica Institucional, disponibiliza uma tabela estatística registrando em tempo real a inserção de novos itens. Foi criado um metadado que contém um número único para cada integrante da comunidade científica do IPEN. Esse metadado se transformou em um filtro que ao ser acionado apresenta todos os trabalhos de um determinado autor independente das variáveis na forma de citação do seu nome.

A elaboração do projeto do RI do IPEN foi iniciado em novembro de 2013, colocado em operação interna em julho de 2014 e disponibilizado na Internet em junho de 2015. Utiliza o software livre Dspace, desenvolvido pelo Massachusetts Institute of Technology (MIT). Para descrição dos metadados adota o padrão Dublin Core. É compatível com o Protocolo de Arquivos Abertos (OAI) permitindo interoperabilidade com repositórios de âmbito nacional e internacional.

1. Portaria IPEN-CNEN/SP nº 387, que estabeleceu os princípios que nortearam a criação do RDI, clique aqui.


2. A experiência do Instituto de Pesquisas Energéticas e Nucleares (IPEN-CNEN/SP) na criação de um Repositório Digital Institucional – RDI, clique aqui.

O Repositório Digital do IPEN é um equipamento institucional de acesso aberto, criado com o objetivo de reunir, preservar, disponibilizar e conferir maior visibilidade à Produção Científica publicada pelo Instituto, desde sua criação em 1956.

Operando, inicialmente como uma base de dados referencial o Repositório foi disponibilizado na atual plataforma, em junho de 2015. No Repositório está disponível o acesso ao conteúdo digital de artigos de periódicos, eventos, nacionais e internacionais, livros, capítulos, dissertações, teses e relatórios técnicos.

A elaboração do projeto do RI do IPEN foi iniciado em novembro de 2013, colocado em operação interna em julho de 2014 e disponibilizado na Internet em junho de 2015. Utiliza o software livre Dspace, desenvolvido pelo Massachusetts Institute of Technology (MIT). Para descrição dos metadados adota o padrão Dublin Core. É compatível com o Protocolo de Arquivos Abertos (OAI) permitindo interoperabilidade com repositórios de âmbito nacional e internacional.

O gerenciamento do Repositório está a cargo da Biblioteca do IPEN. Constam neste RI, até o presente momento 20.950 itens que tanto podem ser artigos de periódicos ou de eventos nacionais e internacionais, dissertações e teses, livros, capítulo de livros e relatórios técnicos. Para participar do RI-IPEN é necessário que pelo menos um dos autores tenha vínculo acadêmico ou funcional com o Instituto. Nesta primeira etapa de funcionamento do RI, a coleta das publicações é realizada periodicamente pela equipe da Biblioteca do IPEN, extraindo os dados das bases internacionais tais como a Web of Science, Scopus, INIS, SciElo além de verificar o Currículo Lattes. O RI-IPEN apresenta também um aspecto inovador no seu funcionamento. Por meio de metadados específicos ele está vinculado ao sistema de gerenciamento das atividades do Plano Diretor anual do IPEN (SIGEPI). Com o objetivo de fornecer dados numéricos para a elaboração dos indicadores da Produção Cientifica Institucional, disponibiliza uma tabela estatística registrando em tempo real a inserção de novos itens. Foi criado um metadado que contém um número único para cada integrante da comunidade científica do IPEN. Esse metadado se transformou em um filtro que ao ser acionado apresenta todos os trabalhos de um determinado autor independente das variáveis na forma de citação do seu nome.